Schneider Electric BMXDDI3202K, EAN: 3595863910018

Schneider Electric BMXDDI3202K PLC module 32DI 24VDC

Industrial Material > Automation > PLC Systems

Schneider Electric BMXDDI3202K PLC module 32DI 24VDC

Lieske Part No. 603158
Mfg Part No BMXDDI3202K
EAN-Code 3595863910018
Manufacturer Schneider Electric
Here only 317,75 EUR
378,12 EUR incl. VAT

Further information for Schneider Electric BMXDDI3202K PLC module 32DI 24VDC

Complementary
Input wiring mode2 or 3 wires
Discrete input current2.5 mA at 24 V DC
Voltage state 1 guaranteed>= 11 V
Voltage state 0 guaranteed< 5 V
Current state 1 guaranteed>= 2 mA
Input impedance9600 Ohm
Insulation resistance> 10 MOhm 500 V DC
DC typical response time4 ms
DC maximum response time7 ms
Sensor power supply: 19…30 V
Typical current consumption121 mA DC
Current consumption160 mA at 3.3 V DC
Power dissipation in W3.9 W
Isolation between channels and bus1500 V for 1 minute
MTBF reliability905000 H
Voltage detection threshold< 14 V DC sensor fault; > 18 V DC sensor OK
Local signalling1 LED (green) for module operating (RUN); 1 LED per channel (green) for channel diagnostic; 1 LED (red) for module error (ERR); 1 LED (red) for module I/O
Height134.6 mm
Width32 mm
Depth86 mm
Net weight0.112 kg
Paralleling of inputsNo
Hot swapping fallbackYes
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20
Protective treatmentStandard version
MarkingCE; UKCA; CULus; RCM; EAC
Directives2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Dielectric strength1500 V AC at 50/60 Hz 1 minute, primary/secondary; 500 V DC 1 minute, between group of channels
Ambient air temperature for operation0…60 °C
Ambient air temperature for storage-40…85 °C
Relative humidity5…95 % at 55 °C without condensation
Operating altitude0...2000 m; 2000...5000 m with derating
Pollution degree2
Vibration resistance3 gn
Shock resistance30 gn
Logistical informations
Country of originID
Main
Range of productModicon X80
Product or component typeDiscrete input module
Discrete input number32
Discrete input voltage24 V DC for isolated
Discrete input logicPositive logic (sink)
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.200 cm
Package 1 Width11.000 cm
Package 1 Length11.500 cm
Package 1 Weight143.000 g
Unit Type of Package 2S02
Number of Units in Package 215
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight2.860 kg
This digital input module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 32 input channels and is powered by 24 V DC (positive). This product meets TC treatment requirements (all climate treatment) and can operate in a temperature range of 0°C to +60°C/32°F to 140°F. Modicon X80 modules provide a consistent environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 904,985 hours. This product meets the needs of our customers in the Smart Infrastructure, Water & Wastewater, Consumer Packaged Goods, Mining, Minerals, Metals, Data Center and Power Generation industries. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5, EN 61850-3 and EN 61131-2 Type 1 standards. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 40-pin connector. The product must be installed in the module carrier and secured with 2 screws.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/603158
qrcode für Schneider Electric BMXDDI3202K PLC module 32DI 24VDC