Further information for Schneider Electric BMXDDI1604T digital input module 16 inputs 125 V DC
Complementary
Discrete input current
2.4 mA at 125 V DC
Voltage state 1 guaranteed
>= 88 V
Current state 1 guaranteed
>= 2 mA
Input impedance
50000 Ohm
Insulation resistance
> 10 MOhm 500 V DC
DC typical response time
5 ms
DC maximum response time
9 ms
Sensor power supply
: 100…150 V
Typical current consumption
76 mA DC
Power dissipation in W
3.2 W; 5.0 W at 60 °C; 6.7 W at 50 °C; 8.5 W at 40 °C
Isolation between channels and bus
1500 V for 1 minute
MTBF reliability
888402 H
Voltage detection threshold
< 80 V DC sensor fault; > 100 V DC sensor OK
Local signalling
1 LED (green) for module operating (RUN); 1 LED per channel (green) for channel diagnostic; 1 LED (red) for module error (ERR); 1 LED (red) for module I/O
Height
103.7 mm
Width
32 mm
Depth
86 mm
Net weight
0.115 kg
Paralleling of inputs
Hot swapping fallback
Contractual warranty
Warranty (in months)
18
Environment
IP degree of protection
IP20
Protective treatment
Standard version
Marking
CE; UKCA; CULus; RCM; EAC
Directives
2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Dielectric strength
2500 V AC at 50/60 Hz 1 minute, primary/secondary
Ambient air temperature for operation
-25…70 °C
Ambient air temperature for storage
-40…85 °C
Relative humidity
5…95 % at 55 °C without condensation
Operating altitude
0...2000 m; 2000...5000 m with derating
Pollution degree
2
Environmental characteristic
Gas resistant class Gx; Gas resistant class 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold growth resistant class 3B2; Fungal spore resistant class 3B2
Vibration resistance
3 gn
Shock resistance
30 gn
Logistical informations
Country of origin
FR
Main
Range of product
Modicon X80
Product or component type
Discrete input module
Discrete input number
16
Discrete input voltage
125 V DC for isolated
Discrete input logic
Positive logic (sink)
Packing Units
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Height
5.500 cm
Package 1 Width
11.200 cm
Package 1 Length
11.800 cm
Package 1 Weight
147.000 g
Unit Type of Package 2
S02
Number of Units in Package 2
15
Package 2 Height
15.000 cm
Package 2 Width
30.000 cm
Package 2 Length
40.000 cm
Package 2 Weight
2.580 kg
This digital input module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 16 input channels and is powered by 125 V DC (positive). This product meets TC treatment requirements (treatment for all climates) and can operate in a temperature range of 0°C to +60°C/32°F to 140°F. Modicon X80 modules provide a uniform environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. It has an external fuse per group of channel 0.5A and reverse polarity protection with fast tripping. This product is IP20 rated and offers an MTBF of 885,821 hours. This product meets the needs of our customers in the Smart Infrastructure, Water and Wastewater, Consumer Packaged Goods, Mining, Minerals, Metals, Data Center and Power Generation industries. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Marine and complies with EN 61000-6-5, EN 61850-3 and EN 61131-2 Type 3 standards. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The product must be installed in the module carrier and secured with 2 screws.