Complementary
Input wiring mode	2 or 3 wires
Discrete input current	3.5 mA at 24 V DC
Voltage state 1 guaranteed	>= 11 V
Voltage state 0 guaranteed	< 5 V
Current state 1 guaranteed	>= 2 mA
Input impedance	6800 Ohm
Input protection type	Reverse polarity protection
Insulation resistance	> 10 MOhm 500 V DC
DC typical response time	4 ms
DC maximum response time	7 ms
Sensor power supply	: 19…30 V
Typical current consumption	76 mA DC
Power dissipation in W	2.5 W
Isolation between channels and bus	1500 V for 1 minute
MTBF reliability	775000 H
Voltage detection threshold	< 14 V DC sensor fault; > 18 V DC sensor OK
Local signalling	1 LED (green) for module operating (RUN); 1 LED per channel (green) for channel diagnostic; 1 LED (red) for module error (ERR); 1 LED (red) for module I/O
Height	103.7 mm
Width	32 mm
Depth	86 mm
Net weight	0.115 kg
Paralleling of inputs
Hot swapping fallback
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
Protective treatment	Standard version
Marking	CE; UKCA; CULus; EAC; RCM
Standards	IEC 61131-2
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Dielectric strength	1500 V AC at 50/60 Hz 1 minute, primary/secondary
Ambient air temperature for operation	0…60 °C
Ambient air temperature for storage	-40…85 °C
Relative humidity	5…95 % at 55 °C without condensation
Operating altitude	0...2000 m; 2000...5000 m with derating
Pollution degree	2
Environmental characteristic	Fungal spore resistant class 3B2
Vibration resistance	3 gn
Shock resistance	30 gn
Logistical informations
Country of origin	ID
Main
Range of product	Modicon X80
Product or component type	Discrete input module
Device application	Industrial application
Discrete input number	16
Discrete input voltage	24 V DC for isolated
Discrete input logic	Positive logic (sink)
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.700 cm
Package 1 Width	11.500 cm
Package 1 Length	12.000 cm
Package 1 Weight	144.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	15
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	2.950 kg
Unit Type of Package 3	P06
Number of Units in Package 3	240
Package 3 Height	75.000 cm
Package 3 Width	60.000 cm
Package 3 Length	80.000 cm
Package 3 Weight	52.000 kg

This digital input module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 16 input channels and is supplied with 24V DC (positive). This product meets TC treatment requirements (treatment for all climates) and can operate in a temperature range of 0°C to +60°C/32°F to 140°F. Modicon X80 modules provide a unified environment for the deployment of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 775,163 hours. This product meets the needs of our customers in the Smart Infrastructure, Water & Wastewater, Consumer Packaged Goods, Mining, Minerals, Metals, Data Center and Power Generation industries. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5, EN 61850-3 and EN 61131-2 Type 3 standards. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The product must be installed in the module carrier and secured with 2 screws.