Complementary
Bus type	Bus X across the remote backplane
Number of port	3
Integrated connection type	1 port for service or distributed equipment; 2 port for Ethernet RIO Network (RSTP)
Communication network type	IPv4 (internet protocol)
Communication port protocol	EtherNet/IP
Communication service	Ethernet/IP adapter; RSTP (Ring topology support); Ethernet RIO network; Quality of Service (QoS); CIP Explicit messaging (server); Modbus TCP server for module diagnostics; DHCP client; TFTP client; FTP client; FDR client; SNTP client; SNMP agent
Cybersecurity	Enable/disable communication ports; Syslog protocol support
Connector type	3 RJ45
Exchange mode	Half duplex, full duplex, autonegotiation, auto MDIX
Transmission rate	10/100 Mbit/s
Port Ethernet	10/100BASE-TX
Function available	CCOTF (configuration change on the fly); Input data is collected and published to the remote I/O head adaptor; Output modules are updated with the data received from remote I/O head adaptor; Diagnostics for remote I/O devices (Device DDT); Port mirroring; System time stamping; Non-interfering type 1; I/O extension rack
Data recording	10 ms time stamps
Topology	Ring
Local signalling	1 LED (green) for module active (RUN); 1 LED (red) for module error (ERR); 1 LED (green/red) for module status (Mod Status); 1 LED (green/red) for network communication status (Net Status); 1 LED (green) for Ethernet link diagnostics (STS)
Current consumption	1200 mA
Input voltage	3.3 V DC
Product compatibility	0…1024 discrete channel; 0…256 analog channel; counter module; time-stamping module; SSI encoder interface module; motion control module; frequency input module; AS-Interface module; serial link module; fiber converter modules
Module format	Standard
Net weight	0.225 kg
Maximum altitude transport	3000 m
Relative humidity	95 % without condensation
fixing mode	By screws
Mounting mode	Rack-mounted
Width	32 mm
Height	100 mm
Depth	87.5 mm
Contractual warranty
Warranty (in months)	18
Environment
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Product certifications	CE; UL; CSA; RCM; EAC; Merchant Navy
Standards	IEC 61131-2; IEC 61010-2-201; UL 61010-2-201; CSA C22.2 No 61010-2-201; IACS E10; IEC 61000-6-5, interface type 1 and type 2; IEC 61850-3, location G
Environmental characteristic	Standard environment
IP degree of protection	IP20
Ambient air temperature for operation	0…60 °C
Ambient air temperature for storage	-40…85 °C
Logistical informations
Country of origin	FR
Main
Range of product	Modicon X80
Range compatibility	Modicon M580; Modicon Quantum
Product or component type	I/O expansion module
Device application	X80 Ethernet RIO drop adaptor
Product specific application	For remote I/O modules
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.500 cm
Package 1 Width	11.000 cm
Package 1 Length	11.800 cm
Package 1 Weight	254.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	15
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	4.200 kg

This Remote I/O drop is part of the Modicon X80 range, a common input/output offering for Modicon M340 and Modicon M580. This Ethernet Remote Input Output (RIO) adapter has 3 ports with enhanced service port capabilities. Integrated connections are EtherNet/IP for the device network and EtherNet/IP for the service port. Modicon X80 modules provide a unified environment for deploying I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. The input data is collected and passed to the Remote I/O head adapter and the output modules are updated with the data received from the Remote I/O head adapter. It is an IP20 rated product. This product is certified by CE, Merchant Navy, GOST and C-Tick. It complies with EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This adapter is compatible with the BMXERT multifunction input module, the BMXNOM Ethernet module, the BMXEHC counter module, 0 to 1024 discrete channels, 0 to 256 analog channels and the BMEAH HART module. The product must be installed in a module carrier and secured with 2 screws.