Complementary
Primary voltage limit	85...264 V
Network frequency	50/60 Hz
Network frequency limits	47…63 Hz
Apparent power	0.12 kVA
Input current	0.52 A 240 V; 1.04 A 115 V
Inrush current	30 A 120 V; 60 A 240 V
I²t on activation	1 A².s 120 V; 3 A².s 240 V
It on activation	0.05 A.s 120 V; 0.07 A.s 240 V
MTBF reliability	4300000 H
Protection type	Internal fuse not accessible for primary circuit; Overload protection for secondary circuit; Overvoltage protection for secondary circuit; Short-circuit protection for secondary circuit
Current at secondary voltage	0.9 A 24 V DC sensor power supply; 1.3 A 24 V DC I/O module power supply and processor; 4.5 A 3.3 V DC I/O module logic power supply
Maximum power dissipation in W	8.5 W
Status LED	1 LED (green) rack voltage OK; 1 LED (green) sensor voltage
Control type	RESET push-button cold restart
Electrical connection	1 connector 2 pin(s)alarm relay; 1 connector 5 pin(s)line supply, protective earth, 24 V DC input sensor
Insulation resistance	>= 100 MOhm primary/ground; >= 100 MOhm primary/secondary
Net weight	0.36 kg
Contractual warranty
Warranty (in months)	18
Environment
Immunity to microbreaks	1 ms
Dielectric strength	1500 V primary/secondary I/O module logic power supply; 1500 V primary/secondary I/O module power supply and processor; 2300 V primary/secondary sensor power supply; 1500 V primary/ground; 500 V 24 V sensor output/ground
Vibration resistance	3 gn
Shock resistance	30 gn
IP degree of protection	IP20
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Ambient air temperature for storage	-40…85 °C
Ambient air temperature for operation	0…60 °C
Relative humidity	5…95 % at 55 °C without condensation
Protective treatment	TC
Operating altitude	0...2000 m; 2000...5000 m with derating factor
Logistical informations
Country of origin	ID
Main
Range of product	Modicon X80
Product or component type	Power supply module
backplane compatibility	Not compatible with BMEXBP..02
Primary voltage	100...240 V
Supply circuit type	AC
Secondary power	15 W 3.3 V DC I/O module logic power supply; 31.2 W 24 V DC I/O module power supply and processor; 21.6 W 24 V DC sensor power supply
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	13.000 cm
Package 1 Width	15.500 cm
Package 1 Length	15.500 cm
Package 1 Weight	530.000 g
Unit Type of Package 2	S04
Number of Units in Package 2	12
Package 2 Height	30.000 cm
Package 2 Width	40.000 cm
Package 2 Length	60.000 cm
Package 2 Weight	7.520 kg
Unit Type of Package 3	P06
Number of Units in Package 3	48
Package 3 Height	75.000 cm
Package 3 Width	60.000 cm
Package 3 Length	80.000 cm
Package 3 Weight	41.000 kg

This power supply is part of the Modicon X80 range, a range of common inputs and outputs for Modicon M340 and Modicon M580. It has a primary voltage of 100V to 240V AC. It is a power supply module with a secondary power of 36W at 24V DC, a current at secondary voltage of 4.5A at 3.3V DC and a maximum power dissipation of 8.5W. It is equipped with a 2-pin connector for the alarm relay, a 5-pin connector for the mains supply and a protective conductor for the electrical connection. It is an IP20 certified product. The product must be installed in the module carrier and secured with 2 screws. This product is certified by CE, RCM, Merchant Navy, CSA, EAC and UL. It complies with EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This power supply is compatible with all X80 module carriers. Modicon X80 modules provide a uniform environment for the use of I/O modules in automation architectures by reducing the costs of spare parts inventory, maintenance and training.