Complementary
Primary voltage limit	18...62.4 V
Input current	0.83 A 48 V; 1.65 A 24 V
Inrush current	30 A 24 V; 60 A 48 V
I²t on activation	1 A².s 24 V; 3 A².s 48 V
It on activation	0.2 A.s 24 V; 0.3 A.s 48 V
MTBF reliability	4600000 H
Protection type	Internal fuse not accessible for primary circuit; Overload protection for secondary circuit, 24 V sensor power supply; Overvoltage protection for secondary circuit, 24 V sensor power supply; Short-circuit protection for secondary circuit, 24 V sensor power supply
Current at secondary voltage	1.3 A 24 V DC I/O module power supply and processor; 4.5 A 3.3 V DC I/O module logic power supply
Maximum power dissipation in W	8.5 W
Status LED	1 LED (green) rack voltage OK
Control type	RESET push-button cold restart
Electrical connection	1 connector 2 pin(s)alarm relay; 1 connector 5 pin(s)line supply, protective earth
Maximum cable distance between devices	10 m power supply cable copper 1.5 mm²; 15 m power supply cable copper 2.5 mm²
Insulation resistance	>= 10 MOhm primary/ground; >= 10 MOhm primary/secondary
Net weight	0.34 kg
Contractual warranty
Warranty (in months)	18
Environment
Immunity to microbreaks	1 ms
Dielectric strength	1500 V primary/ground; 1500 V primary/secondary
Vibration resistance	3 gn
Shock resistance	30 gn
IP degree of protection	IP20
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility; 2014/34/EU - ATEX directive
Product certifications	CE; UL; CSA; RCM; EAC; Merchant Navy; ATEX zone 2/22; IECEx zone 2/22
Standards	IEC 61131-2; IEC 61010-2-201; UL 61010-2-201; CSA C22.2 No 61010-2-201; IACS E10; EN/IEC 61000-6-5, interface type 1 and type 2; EN/IEC 61850-3, location G; IEC 60079-0
Environmental characteristic	Gas resistant class Gx conforming to ISA S71.04; Gas resistant class 3C4 conforming to IEC 60721-3-3; Dust resistant class 3S4 conforming to IEC 60721-3-3; Sand resistant class 3S4 conforming to IEC 60721-3-3; Salt resistant level 2 conforming to IEC 68252; Mold growth resistant class 3B2 conforming to IEC 60721-3-3; Fungal spore resistant class 3B2 conforming to IEC 60721-3-3; Hazardous location class I division 2
Ambient air temperature for storage	-40…85 °C
Ambient air temperature for operation	-25…70 °C
Relative humidity	5…95 % at 55 °C without condensation
Protective treatment	Conformal coating
Operating altitude	0...2000 m; 2000...5000 m with derating factor
Logistical informations
Country of origin	ID
Main
Range of product	Modicon X80
Product or component type	Power supply module
backplane compatibility	Not compatible with BMEXBP..02
Product specific application	For severe environments
Primary voltage	24...48 V isolated
Supply circuit type	DC
Secondary power	15 W 3.3 V DC at 0…60 °C I/O module logic power supply; 31.2 W 24 V DC at 0…60 °C I/O module power supply and processor; 11.3 W 3.3 V DC at -25…70 °C I/O module logic power supply; 23.4 W 24 V DC at -25…70 °C I/O module power supply and processor
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	13.800 cm
Package 1 Width	15.700 cm
Package 1 Length	15.900 cm
Package 1 Weight	544.000 g
Unit Type of Package 2	S04
Number of Units in Package 2	12
Package 2 Height	30.000 cm
Package 2 Width	40.000 cm
Package 2 Length	60.000 cm
Package 2 Weight	7.274 kg

This harsh environment power supply is part of the Modicon X80 range, a range of common inputs and outputs for Modicon M340 and Modicon M580. It has an isolated primary voltage of 24 V to 48 V DC. It is a power supply module with a secondary power of 31.2 W at 24 V DC, a secondary voltage current of 4.5 A at 3.3 V DC and a maximum power dissipation of 8.5 W. This robust product can be used in harsher environments and operate in an extended temperature range of -25°C to +70°C. It is equipped with a 2-pin connector for the alarm relay, a 5-pin connector for the mains supply and a protective conductor for the electrical connection. It is an IP20 certified product. The product must be installed in the module carrier and secured with 2 screws. This product is certified by ATEX, IEC-Ex, CE, RCM, Merchant Navy, CSA, EAC and UL. It complies with EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This power supply is compatible with all X80 module carriers. Modicon X80 modules provide a uniform environment for the use of I/O modules in automation architectures by reducing the costs of spare parts inventory, maintenance and training.