Complementary
Primary voltage limit	18...62.4 V
Input current	0.83 A 48 V; 1.65 A 24 V
Inrush current	30 A 24 V; 60 A 48 V
I²t on activation	1 A².s 24 V; 3 A².s 48 V
It on activation	0.2 A.s 24 V; 0.3 A.s 48 V
MTBF reliability	4600000 H
Protection type	Internal fuse not accessible for primary circuit; Overload protection for secondary circuit, 24 V sensor power supply; Overvoltage protection for secondary circuit, 24 V sensor power supply; Short-circuit protection for secondary circuit, 24 V sensor power supply
Current at secondary voltage	1.3 A 24 V DC I/O module power supply and processor; 4.5 A 3.3 V DC I/O module logic power supply
Maximum power dissipation in W	8.5 W
Status LED	1 LED (green) rack voltage OK
Control type	RESET push-button cold restart
Electrical connection	1 connector 2 pin(s)alarm relay; 1 connector 5 pin(s)line supply, protective earth
Maximum cable distance between devices	10 m power supply cable copper 1.5 mm²; 15 m power supply cable copper 2.5 mm²
Insulation resistance	>= 10 MOhm primary/ground; >= 10 MOhm primary/secondary
Net weight	0.34 kg
Contractual warranty
Warranty (in months)	18
Environment
Immunity to microbreaks	1 ms
Dielectric strength	1500 V primary/ground; 1500 V primary/secondary
Vibration resistance	3 gn
Shock resistance	30 gn
IP degree of protection	IP20
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Ambient air temperature for storage	-40…85 °C
Ambient air temperature for operation	0…60 °C
Relative humidity	5…95 % at 55 °C without condensation
Protective treatment	TC
Operating altitude	0...2000 m; 2000...5000 m with derating factor
Logistical informations
Country of origin	ID
Main
Range of product	Modicon X80
Product or component type	Power supply module
backplane compatibility	Not compatible with BMEXBP..02
Primary voltage	24...48 V isolated
Supply circuit type	DC
Secondary power	15 W 3.3 V DC I/O module logic power supply; 31.2 W 24 V DC I/O module power supply and processor
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	13.200 cm
Package 1 Width	15.500 cm
Package 1 Length	15.500 cm
Package 1 Weight	519.000 g
Unit Type of Package 2	S04
Number of Units in Package 2	12
Package 2 Height	30.000 cm
Package 2 Width	40.000 cm
Package 2 Length	60.000 cm
Package 2 Weight	7.378 kg
Unit Type of Package 3	P06
Number of Units in Package 3	48
Package 3 Height	75.000 cm
Package 3 Width	60.000 cm
Package 3 Length	80.000 cm
Package 3 Weight	38.000 kg

This power supply is part of the Modicon X80 range, a range of common inputs and outputs for Modicon M340 and Modicon M580. It provides the power supply for each Modicon X80 I/O rack and the installed modules. It is supplied isolated at 24 to 48 V DC. It is equipped with a 2-pin connector for the alarm relay, a 5-pin connector for the mains supply and a protective conductor for the electrical connection. It is an IP20 certified product. The product must be installed in the module rack and secured with 2 screws. This product is certified by CE, RCM, Merchant Navy, CSA, EAC and UL. It complies with EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This power supply is compatible with all X80 module racks. Modicon X80 modules provide a unified environment for deploying I/O modules in automation architectures by reducing the costs of spare parts, maintenance and training.