Schneider Electric BMXART0414, EAN: 3595863910186

Schneider Electric BMXART0414 PLC module 4AI TC/RTD 16Bit

Industrial Material > Automation > PLC Systems

Schneider Electric BMXART0414 PLC module 4AI TC/RTD 16Bit

Lieske Part No. 463865
Mfg Part No BMXART0414
EAN-Code 3595863910186
Manufacturer Schneider Electric
Here only 590,99 EUR
703,28 EUR incl. VAT

Further information for Schneider Electric BMXART0414 PLC module 4AI TC/RTD 16Bit

Complementary
Analog/digital conversionSigma delta 16 bits
Analogue input resolution15 bits + sign
Permitted overload on inputs+/- 7.5 V +/- 1.28 V; +/- 7.5 V +/- 160 mV; +/- 7.5 V +/- 320 mV; +/- 7.5 V +/- 40 mV; +/- 7.5 V +/- 640 mV; +/- 7.5 V +/- 80 mV
Common mode rejection120 dB 50/60 Hz
Differential mode rejection60 dB 50/60 Hz
Cold junction compensationExternal by Pt100 probe
Type of filterFirst order digital filtering
Nominal read cycle time400 ms with temperature probe; 200 ms with thermocouple
RecalibrationInternal
Isolation voltage1400 V DC between channels and bus; 750 V DC between channels; 750 V DC between channels and ground
Detection typeOpen circuit Cu 10; Open circuit Ni 100; Open circuit Ni 1000; Open circuit Pt 100; Open circuit Pt 1000; Open circuit thermocouple B; Open circuit thermocouple E; Open circuit thermocouple J; Open circuit thermocouple K; Open circuit thermocouple L; Open circuit thermocouple N; Open circuit thermocouple R; Open circuit thermocouple S; Open circuit thermocouple T; Open circuit thermocouple U
Maximum wiring resistance20 Ohm 2 wires Cu 10; 20 Ohm 2 wires Ni 100; 20 Ohm 2 wires Pt 100; 20 Ohm 3 wires Cu 10; 20 Ohm 3 wires Ni 100; 20 Ohm 3 wires Pt 100; 200 Ohm 2 wires Ni 1000; 200 Ohm 2 wires Pt 1000; 200 Ohm 3 wires Ni 1000; 200 Ohm 3 wires Pt 1000; 50 Ohm 4 wires Cu 10; 50 Ohm 4 wires Ni 100; 50 Ohm 4 wires Pt 100; 500 Ohm 4 wires Ni 1000; 500 Ohm 4 wires Pt 1000
Measurement resolution0.1 °C Cu 10; 0.1 °C Ni 100; 0.1 °C Ni 1000; 0.1 °C Pt 100; 0.1 °C Pt 1000; 0.1 °C thermocouple B; 0.1 °C thermocouple E; 0.1 °C thermocouple J; 0.1 °C thermocouple K; 0.1 °C thermocouple L; 0.1 °C thermocouple N; 0.1 °C thermocouple R; 0.1 °C thermocouple S; 0.1 °C thermocouple T; 0.1 °C thermocouple U; 1280/2exp14 mV +/- 1.28 V; 160/2exp14 mV +/- 160 mV; 320/2exp14 mV +/- 320 mV; 40/2exp14 mV +/- 40 mV; 12.5 mOhm 400 Ohm; 125 mOhm 4000 Ohm; 640/2exp14 mV +/- 640 mV; 80/2exp14 mV +/- 80 mV
Maximum conversion value+/- 100 % 400 Ohm; +/- 100 % 4000 Ohm; +/- 102.5 % +/- 1.28 V; +/- 102.5 % +/- 160 mV; +/- 102.5 % +/- 320 mV; +/- 102.5 % +/- 40 mV; +/- 102.5 % +/- 640 mV; +/- 102.5 % +/- 80 mV
MTBF reliability1400000 H
Operating altitude0...2000 m; 2000...5000 m with derating factor
Status LED1 LED (green) RUN; 1 LED per channel (green) channel diagnostic; 1 LED (red) ERR; 1 LED (red) I/O
Net weight0.135 kg
Current consumption150 mA at 3.3 V DC; 40 mA at 24 V DC
Contractual warranty
Warranty (in months)18
Environment
Vibration resistance3 gn
Shock resistance30 gn
Ambient air temperature for storage-40…85 °C
Ambient air temperature for operation0…60 °C
Relative humidity5…95 % at 55 °C without condensation
IP degree of protectionIP20
Directives2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Product certificationsEAC; RCM; UL; Merchant Navy; CSA; CE
StandardsIEC 61131-2; IEC 61000-6-4; IEC 61000-6-2; EN 61010-2-201
Protective treatmentStandard version
Logistical informations
Country of originFR
Main
Range of productModicon X80
Product or component typeAnalog input module
Electrical connection40 ways 1 connector
Isolation between channelsIsolated
Input levelLow level
Analogue input number4
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.500 cm
Package 1 Width11.000 cm
Package 1 Length11.500 cm
Package 1 Weight164.000 g
Unit Type of Package 2S02
Number of Units in Package 215
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight2.750 kg
This analog isolated input module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 4 input channels. This product meets TC treatment requirements (treatment for all climates) and can operate in a temperature range of 0°C to +60°C/32°F to 140°F. Modicon X80 modules provide a uniform environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 1,409,427 hours. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5 and EN 61850-3. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 40-pin connector. The product must be installed in the module carrier and secured with 2 screws.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/463865
qrcode für Schneider Electric BMXART0414 PLC module 4AI TC/RTD 16Bit