Schneider Electric BMXAMO0802H, EAN: 3606489698645

Schneider Electric BMXAMO0802H PLC output module 8-way 0/4..20mA

Industrial Material > Automation > PLC Systems

Schneider Electric BMXAMO0802H PLC output module 8-way 0/4..20mA

Lieske Part No. 1868866
Mfg Part No BMXAMO0802H
EAN-Code 3606489698645
Manufacturer Schneider Electric
Here only 790,74 EUR
940,98 EUR incl. VAT

Further information for Schneider Electric BMXAMO0802H PLC output module 8-way 0/4..20mA

Complementary
Temperature drift45 ppm/°C 0...20 mA; 45 ppm/°C 4...20 mA
Minimum crosstalk attenuation80 dB
Common mode rejection80 dB
Isolation voltage1400 V DC between channels and ground; 1400 V DC between channels and bus
Detection typeOpen circuit 4...20 mA; Short circuit 0...20 mA
Analogue output number8
Analogue output typeCurrent: 0...20 mA; Current: 4...20 mA
Analogue output resolution16 bits
SupplyInternal power supply via rack
Maximum conversion value0...21 mA 0...20 mA; 0...21 mA 4...20 mA
Fallback modeConfigurable; Predefined
MTBF reliability1500000 H
Operating altitude0...2000 m; 2000...5000 m with derating factor
Status LED1 LED (green) RUN; 1 LED per channel (green) channel diagnostic; 1 LED (red) ERR; 1 LED (red) I/O
Net weight0.15 kg
Power consumption in W3.6 W 24 V DC typical; 3.9 W 24 V DC maximum; 0.35 W 3.3 V DC typical; 0.48 W 3.3 V DC maximum
Current consumption150 mA at 3.3 V DC; 135 mA at 24 V DC
Contractual warranty
Warranty (in months)18
Environment
Vibration resistance3 gn
Shock resistance30 gn
Ambient air temperature for storage-40…85 °C
Ambient air temperature for operation-25…70 °C
Relative humidity5…95 % at 55 °C without condensation
IP degree of protectionIP20
Product certificationsMerchant Navy; ATEX; CE; CSA; EAC; RCM; IEC-Ex; UL
StandardsIEC 61131-2; IEC 61000-6-4; IEC 61000-6-2; EN 61010-2-201
Environmental characteristicGas resistant class Gx; Gas resistant class 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold growth resistant class 3B2; Fungal spore resistant class 3B2; Hazardous location class I division 2
Protective treatmentConformal coating
Logistical informations
Country of originFR
Main
Range of productModicon X80
Product or component typeAnalog output module
Product specific applicationFor severe environments
Electrical connection20 ways 1 connector
Isolation between channelsNon isolated
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.300 cm
Package 1 Width11.000 cm
Package 1 Length11.500 cm
Package 1 Weight180.000 g
Unit Type of Package 2S02
Number of Units in Package 215
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight3.050 kg
This analog non-isolated output module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 8 output channels. This rugged product can be used in harsher environments and in an extended temperature range of -25°C to +70°C/-13°F to 158°F. Modicon X80 modules provide a unified environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 1,505,810 hours. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5 and EN 61850-3. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The product must be installed in the module carrier and secured with 2 screws.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1868866
qrcode für Schneider Electric BMXAMO0802H PLC output module 8-way 0/4..20mA