Schneider Electric BMXAMO0410H, EAN: 3595864156637

Schneider Electric BMXAMO0410H analog output module 4 outputs

Industrial Material > Automation > Industrial bus systems

Schneider Electric BMXAMO0410H analog output module 4 outputs

Lieske Part No. 1862691
Mfg Part No BMXAMO0410H
EAN-Code 3595864156637
Manufacturer Schneider Electric
Here only 747,27 EUR
889,25 EUR incl. VAT

Further information for Schneider Electric BMXAMO0410H analog output module 4 outputs

Complementary
Measurement error0.1 % of full scale 25 °C;
Temperature drift45 ppm/°C +/- 10 V; 45 ppm/°C 0...20 mA; 45 ppm/°C 4...20 mA
Minimum crosstalk attenuation80 dB
Common mode rejection100 dB
Isolation voltage1400 V DC between channels and ground; 1400 V DC between channels and bus; 750 V DC between channels
Detection typeOpen circuit 0...20 mA; Open circuit 4...20 mA; Short circuit +/- 10 V
Load impedance ohmic>= 1000 Ohm +/- 10 V;
Output levelHigh level
Analogue output number4
Analogue output typeCurrent: 0...20 mA; Current: 4...20 mA; Voltage: +/- 10 V
Analogue output resolution15 bits + sign
SupplyInternal power supply via rack
Maximum conversion value0...21 mA 0...20 mA; 0...21 mA 4...20 mA; +/- 10.5 V +/- 10 V
Fallback modeConfigurable; Predefined
MTBF reliability1000000 H
Operating altitude0...2000 m; 2000...5000 m with derating factor
Status LED1 LED (green) RUN; 1 LED per channel (green) channel diagnostic; 1 LED (red) ERR; 1 LED (red) I/O
Net weight0.15 kg
Power consumption in W3 W 24 V DC typical; 3.6 W 24 V DC maximum; 0.45 W 3.3 V DC typical; 0.51 W 3.3 V DC maximum
Current consumption150 mA at 3.3 V DC; 140 mA at 24 V DC
Contractual warranty
Warranty (in months)18
Environment
Vibration resistance3 gn
Shock resistance30 gn
Ambient air temperature for storage-40…85 °C
Ambient air temperature for operation-25…70 °C
Relative humidity5…95 % at 55 °C without condensation
IP degree of protectionIP20
Directives2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Product certificationsCE; RCM; CSA; EAC; Merchant Navy; UL; ATEX; IEC-Ex
StandardsIEC 61010-2-201; IEC 61131-2; UL 61010-2-201; CSA C22.2 No 61010-2-201
Environmental characteristicGas resistant class Gx; Gas resistant class 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold growth resistant class 3B2; Fungal spore resistant class 3B2; Hazardous location
Protective treatmentConformal coating
Logistical informations
Country of originFR
Main
Range of productModicon X80
Product or component typeAnalog output module
Product specific applicationFor severe environments
Electrical connection20 ways 1 connector
Isolation between channelsIsolated
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.500 cm
Package 1 Width11.600 cm
Package 1 Length11.800 cm
Package 1 Weight222.000 g
Unit Type of Package 2S02
Number of Units in Package 215
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight3.624 kg
This analog isolated output module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 4 output channels. This rugged product can be used in harsher environments and in an extended temperature range of -25°C to +70°C/-13°F to 158°F. Modicon X80 modules provide a unified environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 1,058,335 hours. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5 and EN 61850-3. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The product must be installed in the module carrier and secured with 2 screws.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1862691
qrcode für Schneider Electric BMXAMO0410H analog output module 4 outputs