| Complementary |
| Temperature drift | 45 ppm/°C +/- 10 V; 45 ppm/°C 0...20 mA; 45 ppm/°C 4...20 mA |
| Minimum crosstalk attenuation | 80 dB |
| Common mode rejection | 100 dB |
| Isolation voltage | 1400 V DC between channels and ground; 1400 V DC between channels and bus; 750 V DC between channels |
| Detection type | Open circuit 0...20 mA; Open circuit 4...20 mA; Short circuit +/- 10 V |
| Load impedance ohmic | >= 1000 Ohm +/- 10 V; |
| Output level | High level |
| Analogue output number | 4 |
| Analogue output type | Current: 0...20 mA; Current: 4...20 mA; Voltage: +/- 10 V |
| Analogue output resolution | 15 bits + sign |
| Supply | Internal power supply via rack |
| Maximum conversion value | 0...21 mA 0...20 mA; 0...21 mA 4...20 mA; +/- 10.5 V +/- 10 V |
| Fallback mode | Configurable; Predefined |
| MTBF reliability | 1000000 H |
| Operating altitude | 0...2000 m; 2000...5000 m with derating factor |
| Status LED | 1 LED (green) RUN; 1 LED per channel (green) channel diagnostic; 1 LED (red) ERR; 1 LED (red) I/O |
| Net weight | 0.15 kg |
| Power consumption in W | 3 W 24 V DC typical; 3.6 W 24 V DC maximum; 0.45 W 3.3 V DC typical; 0.51 W 3.3 V DC maximum |
| Current consumption | 150 mA at 3.3 V DC; 140 mA at 24 V DC |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Vibration resistance | 3 gn |
| Shock resistance | 30 gn |
| Ambient air temperature for storage | -40…85 °C |
| Ambient air temperature for operation | 0…60 °C |
| Relative humidity | 5…95 % at 55 °C without condensation |
| IP degree of protection | IP20 |
| Directives | 2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility |
| Product certifications | CE; RCM; CSA; EAC; Merchant Navy; UL |
| Standards | IEC 61010-2-201; IEC 61131-2; UL 61010-2-201; CSA C22.2 No 61010-2-201 |
| Protective treatment | Standard version |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range of product | Modicon X80 |
| Product or component type | Analog output module |
| Electrical connection | 20 ways 1 connector |
| Isolation between channels | Isolated |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.500 cm |
| Package 1 Width | 11.000 cm |
| Package 1 Length | 11.500 cm |
| Package 1 Weight | 211.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 15 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 3.480 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 240 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 66.000 kg |
This analog isolated output module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 4 output channels. This product meets TC treatment requirements (treatment for all climates) and can operate in a temperature range of 0°C to +60°C/32°F to 140°F. Modicon X80 modules provide a uniform environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 1,058,335 hours. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5 and EN 61850-3. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The product must be installed in the module carrier and secured with 2 screws.