Schneider Electric BMXAMO0210, EAN: 3595863910209

Schneider Electric BMXAMO0210 2AO U/I 16Bit

Industrial Material > Automation > Small PLCs

Schneider Electric BMXAMO0210 2AO U/I 16Bit

Lieske Part No. 603144
Mfg Part No BMXAMO0210
EAN-Code 3595863910209
Manufacturer Schneider Electric
Here only 364,32 EUR
433,54 EUR incl. VAT

Further information for Schneider Electric BMXAMO0210 2AO U/I 16Bit

Complementary
Temperature drift30 ppm/°C
RecalibrationFactory calibrated
Minimum crosstalk attenuation90 dB
Common mode rejection100 dB
Isolation voltage1400 V DC between channels and ground; 1400 V DC between channels and bus; 750 V DC between channels
Detection typeOpen circuit 0...20 mA; Open circuit 4...20 mA; Short circuit +/- 10 V
Output levelHigh level
Analogue output number2
Analogue output typeCurrent: 0...20 mA; Current: 4...20 mA; Voltage: +/- 10 V
Analogue output resolution15 bits + sign
SupplyInternal power supply via rack
Maximum conversion value+/- 11.25 V +/- 10 V; 0...24 mA 0...20 mA; 0...24 mA 4...20 mA
Fallback modePredefined; Configurable
MTBF reliability1300000 H
Operating altitude0...2000 m; 2000...5000 m with derating factor
Status LED1 LED (green) RUN; 1 LED per channel (green) channel diagnostic; 1 LED (red) ERR; 1 LED (red) I/O
Net weight0.144 kg
Power consumption in W2.1 W 24 V DC typical; 2.8 W 24 V DC maximum; 0.35 W 3.3 V DC typical; 0.48 W 3.3 V DC maximum
Current consumption150 mA at 3.3 V DC; 110 mA at 24 V DC
Contractual warranty
Warranty (in months)18
Environment
Vibration resistance3 gn
Shock resistance30 gn
Ambient air temperature for storage-40…85 °C
Ambient air temperature for operation0…60 °C
Relative humidity5…95 % at 55 °C without condensation
IP degree of protectionIP20
Directives2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Product certificationsCE; RCM; CSA; EAC; Merchant Navy; UL
StandardsIEC 61010-2-201; IEC 61131-2; UL 61010-2-201; CSA C22.2 No 61010-2-201
Protective treatmentStandard version
Logistical informations
Country of originFR
Main
Range of productModicon X80
Product or component typeAnalog output module
Electrical connection20 ways 1 connector
Isolation between channelsIsolated
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.500 cm
Package 1 Width11.000 cm
Package 1 Length11.500 cm
Package 1 Weight173.000 g
Unit Type of Package 2S02
Number of Units in Package 215
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight2.901 kg
This analog isolated output module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 2 output channels. This product meets TC treatment requirements (all climate treatment) and can operate in a temperature range of 0°C to +60°C/32°F to 140°F. Modicon X80 modules provide a uniform environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 1,301,835 hours. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5 and EN 61850-3. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The product must be installed in the module carrier and secured with 2 screws.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/603144
qrcode für Schneider Electric BMXAMO0210 2AO U/I 16Bit