Complementary
Analogue input resolution	12 bits 0...20 mA; 12 bits 0...5 V; 12 bits 1...5 V; 12 bits 4...20 mA; 13 bits 0...10 V; 14 bits +/- 10 V
Permitted overload on inputs	+/- 30 mA 0...20 mA; +/- 30 mA 4...20 mA; +/- 30 V +/- 10 V; +/- 30 V 0...10 V; +/- 30 V 0...5 V; +/- 30 V 1...5 V
Input impedance	250 Ohm
Precision of internal conversion resistor	0.1 % - 15 ppm/°C
Type of filter	First order digital filtering by firmware
Fast read cycle time	1 ms + 1 ms x number of channels used
Nominal read cycle time	5 ms for 4 channels
Measurement error	0.25 % of full scale 0...20 mA 25 °C output; 0.25 % of full scale 4...20 mA 25 °C output;
Temperature drift	100 ppm/°C +/- 10 V output; 100 ppm/°C 0...20 mA output; 100 ppm/°C 4...20 mA output; 30 ppm/°C +/- 10 V input; 30 ppm/°C 0...10 V input; 30 ppm/°C 0...5 V input; 30 ppm/°C 1...5 V input; 50 ppm/°C 0...20 mA input; 50 ppm/°C 4...20 mA input
Recalibration	Factory calibrated on outputs; Internal on inputs
Minimum crosstalk attenuation	70 dB
Common mode rejection	80 dB
Isolation voltage	1400 V DC between channels and ground; 1400 V DC between channels and bus; 750 V DC between group of I/O channels
Output level	High level
Analogue output number	2
Analogue output type	Current: 0...20 mA; Current: 4...20 mA; Voltage: +/- 10 V
Analogue output resolution	11 bits, 0...20 mA; 11 bits, 4...20 mA; 12 bits, +/- 10 V
Maximum conversion value	+/- 11.25 V +/- 10 V output; +/- 11.25 V +/- 10 V input; 0...30 mA 0...20 mA input; 0...30 mA 4...20 mA input; +/- 11.25 V 0...10 V input; +/- 11.25 V 0...5 V input; +/- 11.25 V 1...5 V input; 0...24 mA 0...20 mA output; 0...24 mA 4...20 mA output
Fallback mode	Predefined; Configurable
MTBF reliability	1400000 H
Operating altitude	0...2000 m; 2000...5000 m with derating factor
Status LED	1 LED (green) RUN; 1 LED per channel (green) channel diagnostic; 1 LED (red) ERR; 1 LED (red) I/O
Net weight	0.155 kg
Power consumption in W	2.6 W 24 V DC typical; 3.2 W 24 V DC maximum; 0.35 W 3.3 V DC typical; 0.48 W 3.3 V DC maximum
Current consumption	240 mA at 3.3 V DC
Contractual warranty
Warranty (in months)	18
Environment
Vibration resistance	3 gn
Shock resistance	30 gn
Ambient air temperature for storage	-40…85 °C
Ambient air temperature for operation	0…60 °C
Relative humidity	5…95 % at 55 °C without condensation
IP degree of protection	IP20
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Product certifications	CE; RCM; CSA; EAC; Merchant Navy; UL
Standards	IEC 61010-2-201; IEC 61131-2; UL 61010-2-201; CSA C22.2 No 61010-2-201
Protective treatment	Standard version
Logistical informations
Country of origin	FR
Main
Range of product	Modicon X80
Product or component type	Mixed analog I/O module
Electrical connection	20 ways 1 connector
Isolation between channels	Non isolated
Input level	High level
Analogue input number	4
Analogue input type	Current 0...20 mA; Current 4...20 mA; Voltage +/- 10 V; Voltage 0...10 V; Voltage 0...5 V; Voltage 1...5 V
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.500 cm
Package 1 Width	11.000 cm
Package 1 Length	11.600 cm
Package 1 Weight	172.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	15
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	2.882 kg

This analog non-isolated input and output module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 4 input channels and 2 output channels. This product meets TC treatment requirements (treatment for all climates) and can operate in a temperature range of 0°C to +60°C/32°F to 140°F. Modicon X80 modules provide a unified environment for the use of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. This product is IP20 rated and offers an MTBF of 1,364,412 hours. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5 and EN 61850-3. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The product must be installed in the module carrier and secured with 2 screws.