| Complementary |
| Analog/digital conversion | 24 bits |
| Analogue input resolution | 16 bits |
| Permitted overload on inputs | +/- 30 V +/- 10 V; +/- 30 V +/- 5 V; +/- 30 V 0...10 V; +/- 30 V 0...5 V; +/- 30 V 1...5 V; +/- 90 mA +/- 20 mA; +/- 90 mA 0...20 mA; +/- 90 mA 4...20 mA |
| Input impedance | 10 MOhm in voltage mode; 250 Ohm + 3.6...50 Ohm internal protective resistor in current mode |
| Precision of internal conversion resistor | 0.1 % - 15 ppm/°C |
| Type of filter | First order digital filtering |
| Fast read cycle time | 1 ms + 1 ms x number of channels used |
| Nominal read cycle time | 5 ms for 4 channels |
| Measurement error | 0.075 % of full scale +/- 10 V 25 °C; 0.075 % of full scale +/- 5 V 25 °C; 0.075 % of full scale 0...10 V 25 °C; 0.075 % of full scale 0...5 V 25 °C; 0.075 % of full scale 1...5 V 25 °C; 0.15 % of full scale +/- 20 mA 25 °C; 0.15 % of full scale 0...20 mA 25 °C; 0.15 % of full scale 4...20 mA 25 °C; |
| Temperature drift | 15 ppm/°C +/- 10 V; 15 ppm/°C +/- 5 V; 15 ppm/°C 0...10 V; 15 ppm/°C 0...5 V; 15 ppm/°C 1...5 V; 30 ppm/°C +/- 20 mA; 30 ppm/°C 0...20 mA; 30 ppm/°C 4...20 mA |
| Recalibration | Internal |
| Minimum crosstalk attenuation | 80 dB |
| Common mode rejection | 90 dB |
| Digital value format | - 32768 to + 32767 in maximum user scale; +/- 10000 by default |
| Isolation voltage | 300 V DC between channels; 1400 V DC between channels and ground; 1400 V DC between channels and bus |
| Measurement resolution | 0.35 mV +/- 10 V; 0.35 mV +/- 5 V; 0.35 mV 0...10 V; 0.35 mV 0...5 V; 0.35 mV 1...5 V; 0.92 µA +/- 20 mA; 0.92 µA 0...20 mA; 0.92 µA 4...20 mA |
| Maximum conversion value | +/- 11.4 V +/- 10 V; +/- 11.4 V +/- 5 V; +/- 11.4 V 0...10 V; +/- 11.4 V 0...5 V; +/- 11.4 V 1...5 V; 0...30 mA +/- 20 mA; 0...30 mA 0...20 mA; 0...30 mA 4...20 mA |
| MTBF reliability | 1200000 H |
| Operating altitude | 0...2000 m; 2000...5000 m with derating factor |
| Status LED | 1 LED (green) RUN; 1 LED per channel (green) channel diagnostic; 1 LED (red) ERR; 1 LED (red) I/O |
| Net weight | 0.143 kg |
| Power consumption in W | 0.82 W 24 V DC typical; 1.30 W 24 V DC maximum; 0.32 W 3.3 V DC typical; 0.48 W 3.3 V DC maximum |
| Current consumption | 150 mA at 3.3 V DC; 45 mA at 24 V DC |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Vibration resistance | 3 gn |
| Shock resistance | 30 gn |
| Ambient air temperature for storage | -40…85 °C |
| Ambient air temperature for operation | -25…70 °C |
| Relative humidity | 5…95 % at 55 °C without condensation |
| IP degree of protection | IP20 |
| Directives | 2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility |
| Product certifications | CE; RCM; CSA; EAC; Merchant Navy; UL; ATEX; IEC-Ex |
| Standards | IEC 61010-2-201; IEC 61131-2; UL 61010-2-201; CSA C22.2 No 61010-2-201 |
| Environmental characteristic | Gas resistant class Gx; Gas resistant class 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold growth resistant class 3B2; Fungal spore resistant class 3B2; Hazardous location |
| Protective treatment | Conformal coating |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range of product | Modicon X80 |
| Product or component type | Analog input module |
| Product specific application | For severe environments |
| Electrical connection | 20 ways 1 connector |
| Isolation between channels | Isolated |
| Input level | High level |
| Analogue input number | 4 |
| Analogue input type | Current +/- 20 mA; Current 0...20 mA; Current 4...20 mA; Voltage +/- 10 V; Voltage +/- 5 V; Voltage 0...10 V; Voltage 0...5 V; Voltage 1...5 V |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.400 cm |
| Package 1 Width | 11.700 cm |
| Package 1 Length | 11.900 cm |
| Package 1 Weight | 180.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 15 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 3.077 kg |
This analog isolated input module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 4 input channels. This rugged product can be used in harsher environments and in an extended temperature range of -25°C to +70°C/-13°F to 158°F. Modicon X80 modules provide a unified environment for the deployment of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. It is equipped with a 20-pin connector for electrical connection. This product has an IP20 protection rating and offers an MTBF of 1,208,015 hours. This module meets the needs of applications in transportation, water and wastewater, consumer packaged goods, mining, minerals, metals, power generation, energy and chemical, and data centers. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5 and EN 61850-3. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The product must be installed in the module carrier and secured with 2 screws.