Complementary
Analog/digital conversion	24 bits
Analogue input resolution	16 bits
Permitted overload on inputs	+/- 30 V +/- 10 V; +/- 30 V +/- 5 V; +/- 30 V 0...10 V; +/- 30 V 0...5 V; +/- 30 V 1...5 V; +/- 90 mA +/- 20 mA; +/- 90 mA 0...20 mA; +/- 90 mA 4...20 mA
Input impedance	10 MOhm in voltage mode; 250 Ohm + 3.6...50 Ohm internal protective resistor in current mode
Precision of internal conversion resistor	0.1 % - 15 ppm/°C
Type of filter	First order digital filtering
Fast read cycle time	1 ms + 1 ms x number of channels used
Nominal read cycle time	5 ms for 4 channels
Temperature drift	15 ppm/°C +/- 10 V; 15 ppm/°C +/- 5 V; 15 ppm/°C 0...10 V; 15 ppm/°C 0...5 V; 15 ppm/°C 1...5 V; 30 ppm/°C +/- 20 mA; 30 ppm/°C 0...20 mA; 30 ppm/°C 4...20 mA
Recalibration	Internal
Minimum crosstalk attenuation	80 dB
Common mode rejection	90 dB
Digital value format	- 32768 to + 32767 in maximum user scale; +/- 10000 by default
Isolation voltage	300 V DC between channels; 1400 V DC between channels and ground; 1400 V DC between channels and bus
Measurement resolution	0.35 mV +/- 10 V; 0.35 mV +/- 5 V; 0.35 mV 0...10 V; 0.35 mV 0...5 V; 0.35 mV 1...5 V; 0.92 µA +/- 20 mA; 0.92 µA 0...20 mA; 0.92 µA 4...20 mA
Maximum conversion value	+/- 11.4 V +/- 10 V; +/- 11.4 V +/- 5 V; +/- 11.4 V 0...10 V; +/- 11.4 V 0...5 V; +/- 11.4 V 1...5 V; 0...30 mA +/- 20 mA; 0...30 mA 0...20 mA; 0...30 mA 4...20 mA
MTBF reliability	1200000 H
Operating altitude	0...2000 m; 2000...5000 m with derating factor
Status LED	1 LED (green) RUN; 1 LED per channel (green) channel diagnostic; 1 LED (red) ERR; 1 LED (red) I/O
Net weight	0.143 kg
Power consumption in W	0.82 W 24 V DC typical; 1.30 W 24 V DC maximum; 0.32 W 3.3 V DC typical; 0.48 W 3.3 V DC maximum
Current consumption	150 mA at 3.3 V DC; 45 mA at 24 V DC
Contractual warranty
Warranty (in months)	18
Environment
Vibration resistance	3 gn
Shock resistance	30 gn
Ambient air temperature for storage	-40…85 °C
Ambient air temperature for operation	0…60 °C
Relative humidity	5…95 % at 55 °C without condensation
IP degree of protection	IP20
Directives	2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility
Product certifications	CE; RCM; CSA; EAC; Merchant Navy; UL
Standards	IEC 61010-2-201; IEC 61131-2; UL 61010-2-201; CSA C22.2 No 61010-2-201
Protective treatment	Standard version
Logistical informations
Country of origin	FR
Main
Range of product	Modicon X80
Product or component type	Analog input module
Electrical connection	20 ways 1 connector
Isolation between channels	Isolated
Input level	High level
Analogue input number	4
Analogue input type	Current +/- 20 mA; Current 0...20 mA; Current 4...20 mA; Voltage +/- 10 V; Voltage +/- 5 V; Voltage 0...10 V; Voltage 0...5 V; Voltage 1...5 V
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	5.600 cm
Package 1 Width	11.100 cm
Package 1 Length	11.700 cm
Package 1 Weight	172.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	15
Package 2 Height	15.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	2.923 kg

This analog isolated input module is part of the Modicon X80 range, a range of common input/output and communication modules, power supplies and module carriers for Modicon M340 and Modicon M580. This product consists of 4 input channels. This product meets TC treatment requirements (treatment for all climates) and can operate in a temperature range of 0°C to +60°C/32°F to 140°F. Modicon X80 modules provide a unified environment for the deployment of I/O modules in automation architectures by reducing spare parts inventory, maintenance and training costs. It is equipped with a 20-pin connector for electrical connection. This product has an IP20 protection rating and offers an MTBF of 1,208,015 hours. This module meets the requirements of applications in transportation, water and wastewater, consumer packaged goods, mining, minerals, metals, power generation, energy and chemical, and data centers. This product is certified by CE, UL, CSA, RCM, EAC, UKCA and Merchant Navy and complies with EN 61000-6-5 and EN 61850-3. This module is compatible with Modicon M340, M580 (Local or Remote I/O) PLCs with a 20-pin cage, screw terminal or removable spring terminal block. The product must be installed in the module carrier and secured with 2 screws.