Schneider Electric BMI1003P32F, EAN: 3606485377834

Schneider Electric BMI1003P32F servo motor 3-phase IP65

Industrial Material > Engines and accessories

Schneider Electric BMI1003P32F servo motor 3-phase IP65

Lieske Part No. 1856609
Mfg Part No BMI1003P32F
EAN-Code 3606485377834
Manufacturer Schneider Electric
Here only 3.749,67 EUR
4.462,11 EUR incl. VAT

Further information for Schneider Electric BMI1003P32F servo motor 3-phase IP65

Complementary
Maximum mechanical speed6000 rpm
[Us] rated supply voltage208...480 V - 15...10 %
Supply voltage limits208…480 V
Network number of phasesThree phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5…63 Hz
EMC filterIntegrated
Continuous output current4 A at 8 kHz
Output current 3s peak12 A at 400 V for 3 s
Continuous stall current4 A
Continuous stall torque8.5 N.m at 208...480 V three phase
Peak stall torque19.2 N.m at 400 V three phase; 19.2 N.m at 480 V three phase; 19.2 N.m at 208 V three phase
Nominal output power1000 W at 208 V three phase; 2000 W at 400 V three phase; 2100 W at 480 V three phase
Nominal torque7.2 N.m at 208 V three phase; 6.8 N.m at 400 V three phase; 5.6 N.m at 480 V three phase
Nominal speed1500 rpm at 208 V three phase; 3000 rpm at 400 V three phase; 3700 rpm at 480 V three phase
Maximum current Irms26.7 A at 208 V, three phase; 26.7 A at 400 V, three phase; 26.7 A at 480 V, three phase
Product compatibilityDrive control unit LXM32i CANopen; Drive control unit LXM32i EtherCAT
Shaft endKeyed
Second shaftWithout second shaft end
Shaft diameter19 mm
Shaft length40 mm
Key width6 mm
Feedback typeAbsolute multiturn SinCos Hiperface
Speed feedback resolution131072 points/turn x 4096 turns
Holding brakeWith
Holding torque9 N.m holding brake
Mounting supportInternational standard flange
Motor flange size100 mm
Electrical connectionPrinted circuit board connector
Torque constant1.7 N.m/A at 20 °C
Back emf constant112 V/krpm at 20 °C
Number of motor poles10
Rotor inertia10.3 kg.cm²
Stator resistance2.31 Ohm at 20 °C
Stator inductance11.43 mH at 20 °C
Stator electrical time constant4.95 ms at 20 °C
Maximum radial force Fr1050 N at 1000 rpm; 830 N at 2000 rpm; 730 N at 3000 rpm; 660 N at 4000 rpm; 610 N at 5000 rpm
Maximum axial force Fa0.2 x Fr
Brake pull-in power8 W
Type of coolingNatural convection
Length338 mm
Number of motor stacks3
Centring collar diameter95 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter9 mm
Circle diameter of the mounting holes115 mm
Distance shaft shoulder-flange3.5 mm
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP65
Main
Range compatibilityLexium 32i
Device short nameBMI
Product or component typeServo motor with power stage
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height25.0 cm
Package 1 Width18.6 cm
Package 1 Length55.0 cm
Package 1 Weight11.0 kg
Drive unit of the integrated servo drive Lexium 32i. This integrated servo drive offers you a modular concept of drive unit, control unit and connection modules, which are plugged together according to the respective application. This BMI drive unit consists of the actual servo motor and the associated power level. The maximum standstill torque of the servo motor is 7.31 Nm. A three-phase mains connection with 208-480 VAC supplies the servo, for which the mains connection module VW3M9003 is required. The dimensions of the motor flange for fastening are 100 mm. The end of the motor shaft has a feather key and the entire drive is designed for protection class IP65. The servo motor is made up of 3 power levels. The built-in Sin/Cos Hiperface absolute encoder is designed as a multiturn with 128 periods per revolution (131072 points/rev x 4096 revolutions). A holding brake is integrated. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1856609
qrcode für Schneider Electric BMI1003P32F servo motor 3-phase IP65