Schneider Electric BMI1002T31A, EAN: 3606485377483

Schneider Electric BMI1002T31A servo motor single-phase IP65

Industrial Material > Engines and accessories

Schneider Electric BMI1002T31A servo motor single-phase IP65

Lieske Part No. 1856956
Mfg Part No BMI1002T31A
EAN-Code 3606485377483
Manufacturer Schneider Electric
Here only 2.686,38 EUR
3.196,79 EUR incl. VAT

Further information for Schneider Electric BMI1002T31A servo motor single-phase IP65

Complementary
Maximum mechanical speed6000 rpm
[Us] rated supply voltage115...230 V - 15...10 %
Supply voltage limits100…240 V
Network number of phasesSingle phase
Supply frequency50/60 Hz - 5...5 %
Network frequency limits47.5…63 Hz
EMC filterIntegrated
Continuous output current6 A at 8 kHz
Output current 3s peak18 A at 230 V for 3 s
Continuous stall current6 A
Continuous stall torque6 N.m at 115...230 V single phase
Peak stall torque14.5 N.m at 115 V single phase; 14.5 N.m at 230 V single phase
Nominal output power750 W at 115 V single phase; 1300 W at 230 V single phase
Nominal torque5.4 N.m at 115 V single phase; 4.4 N.m at 230 V single phase
Nominal speed1400 rpm at 115 V single phase; 3000 rpm at 230 V single phase
Maximum current Irms30 A at 115 V, single phase; 30 A at 230 V, single phase
Product compatibilityDrive control unit LXM32i CANopen; Drive control unit LXM32i EtherCAT
Shaft endKeyed
Second shaftWithout second shaft end
Shaft diameter19 mm
Shaft length40 mm
Key width6 mm
Feedback typeAbsolute single turn SinCos Hiperface
Speed feedback resolution131072 points/turn
Holding brakeWithout
Mounting supportInternational standard flange
Motor flange size100 mm
Electrical connectionPrinted circuit board connector
Torque constant0.89 N.m/A at 20 °C
Back emf constant58.5 V/krpm at 20 °C
Number of motor poles10
Rotor inertia6.28 kg.cm²
Stator resistance1.08 Ohm at 20 °C
Stator inductance4.7 mH at 20 °C
Stator electrical time constant4.35 ms at 20 °C
Maximum radial force Fr990 N at 1000 rpm; 790 N at 2000 rpm; 690 N at 3000 rpm; 620 N at 4000 rpm; 580 N at 5000 rpm
Maximum axial force Fa0.2 x Fr
Type of coolingNatural convection
Length273 mm
Number of motor stacks2
Centring collar diameter95 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter9 mm
Circle diameter of the mounting holes115 mm
Distance shaft shoulder-flange3.5 mm
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP65
Main
Range compatibilityLexium 32i
Device short nameBMI
Product or component typeServo motor with power stage
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height25.0 cm
Package 1 Width18.6 cm
Package 1 Length55.0 cm
Package 1 Weight9.5 kg
Drive unit of the integrated servo drive Lexium 32i. This integrated servo drive offers you a modular concept of drive unit, control unit and connection modules, which are plugged together according to the respective application. This BMI drive unit consists of the actual servo motor and the associated power level. The maximum standstill torque of the servo motor is 5.07 Nm. A single-phase mains connection with 110-120/200-240 VAC supplies the servo, for which the mains connection module VW3M9001 is required. The dimensions of the motor flange for fastening are 100 mm. The end of the motor shaft has a feather key and the entire drive is designed for protection class IP65. The servo motor is made up of 2 power levels. The built-in Sin/Cos Hiperface absolute encoder is designed as a single-turn with 128 periods per revolution (131072 points/rev). There is no holding brake. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1856956
qrcode für Schneider Electric BMI1002T31A servo motor single-phase IP65