| Complementary |
| Maximum mechanical speed | 6000 rpm |
| [Us] rated supply voltage | 208...480 V - 15...10 % |
| Supply voltage limits | 208…480 V |
| Network number of phases | Three phase |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency limits | 47.5…63 Hz |
| EMC filter | Integrated |
| Continuous output current | 4 A at 8 kHz |
| Output current 3s peak | 12 A at 400 V for 3 s |
| Continuous stall current | 4 A |
| Continuous stall torque | 6 N.m at 208...480 V three phase |
| Peak stall torque | 14 N.m at 208 V three phase; 14 N.m at 400 V three phase; 14 N.m at 480 V three phase |
| Nominal output power | 1000 W at 208 V three phase; 1900 W at 400 V three phase; 1900 W at 480 V three phase |
| Nominal torque | 5.1 N.m at 400 V three phase; 5.4 N.m at 208 V three phase; 4.1 N.m at 480 V three phase |
| Nominal speed | 1900 rpm at 208 V three phase; 3800 rpm at 400 V three phase; 4700 rpm at 480 V three phase |
| Maximum current Irms | 17.5 A at 208 V, three phase; 17.5 A at 400 V, three phase; 17.5 A at 480 V, three phase |
| Product compatibility | Drive control unit LXM32i CANopen; Drive control unit LXM32i EtherCAT |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft diameter | 19 mm |
| Shaft length | 40 mm |
| Feedback type | Absolute multiturn SinCos Hiperface |
| Speed feedback resolution | 32768 points/turn x 4096 turns |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 100 mm |
| Electrical connection | Printed circuit board connector |
| Torque constant | 1.28 N.m/A at 20 °C |
| Back emf constant | 84.52 V/krpm at 20 °C |
| Number of motor poles | 10 |
| Rotor inertia | 6.28 kg.cm² |
| Stator resistance | 2.347 Ohm at 20 °C |
| Stator inductance | 9.79 mH at 20 °C |
| Stator electrical time constant | 4.17 ms at 20 °C |
| Maximum radial force Fr | 990 N at 1000 rpm; 790 N at 2000 rpm; 690 N at 3000 rpm; 620 N at 4000 rpm; 580 N at 5000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Type of cooling | Natural convection |
| Length | 273 mm |
| Number of motor stacks | 2 |
| Centring collar diameter | 95 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 9 mm |
| Circle diameter of the mounting holes | 115 mm |
| Distance shaft shoulder-flange | 3.5 mm |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP65 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range compatibility | Lexium 32i |
| Device short name | BMI |
| Product or component type | Servo motor with power stage |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 25.0 cm |
| Package 1 Width | 18.6 cm |
| Package 1 Length | 55.0 cm |
| Package 1 Weight | 9.5 kg |
Drive unit of the integrated servo drive Lexium 32i. This integrated servo drive offers you a modular concept of drive unit, control unit and connection modules, which are plugged together according to the respective application. This BMI drive unit consists of the actual servo motor and the associated power level. The maximum standstill torque of the servo motor is 4.99 Nm. A three-phase mains connection with 208-480 VAC supplies the servo, for which the mains connection module VW3M9003 is required. The dimensions of the motor flange for fastening are 100 mm. The end of the motor shaft is smooth and the entire drive is designed for protection class IP65. The servo motor is made up of 2 power levels. The built-in Sin/Cos Hiperface absolute encoder is designed as a multiturn with 16 periods per revolution (32768 points/rev x 4096 revolutions). There is no holding brake. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.