| Complementary |
| Maximum mechanical speed | 8000 rpm |
| [Us] rated supply voltage | 115...230 V - 15...10 % |
| Supply voltage limits | 100…240 V |
| Network number of phases | Single phase |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency limits | 47.5…63 Hz |
| EMC filter | Integrated |
| Continuous output current | 2.6 A at 8 kHz |
| Output current 3s peak | 10.5 A at 230 V for 1 s |
| Continuous stall current | 2.6 A |
| Continuous stall torque | 2.48 N.m at 115...230 V single phase |
| Peak stall torque | 6.6 N.m at 115 V single phase; 6.6 N.m at 230 V single phase |
| Nominal output power | 700 W at 230 V single phase; 400 W at 115 V single phase |
| Nominal torque | 2.2 N.m at 115 V single phase; 1.7 N.m at 230 V single phase |
| Nominal speed | 4000 rpm at 230 V single phase; 1700 rpm at 115 V single phase |
| Maximum current Irms | 17.7 A at 230 V, single phase; 17.7 A at 115 V, single phase |
| Product compatibility | Drive control unit LXM32i CANopen; Drive control unit LXM32i EtherCAT |
| Shaft end | Keyed |
| Second shaft | Without second shaft end |
| Shaft diameter | 11 mm |
| Shaft length | 23 mm |
| Key width | 4 mm |
| Feedback type | Absolute multiturn SinCos Hiperface |
| Speed feedback resolution | 32768 points/turn x 4096 turns |
| Holding brake | Without |
| Mounting support | International standard flange |
| Motor flange size | 70 mm |
| Electrical connection | Printed circuit board connector |
| Torque constant | 0.63 N.m/A at 20 °C |
| Back emf constant | 42.1 V/krpm at 20 °C |
| Number of motor poles | 10 |
| Rotor inertia | 1.13 kg.cm² |
| Stator resistance | 2.7 Ohm at 20 °C |
| Stator inductance | 7.8 mH at 20 °C |
| Stator electrical time constant | 2.89 ms at 20 °C |
| Maximum radial force Fr | 710 N at 1000 rpm; 560 N at 2000 rpm; 490 N at 3000 rpm; 450 N at 4000 rpm; 410 N at 5000 rpm; 390 N at 6000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Type of cooling | Natural convection |
| Length | 268 mm |
| Number of motor stacks | 2 |
| Centring collar diameter | 60 mm |
| Centring collar depth | 2.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 75…82 mm |
| Distance shaft shoulder-flange | 2.5 mm |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | Shaft: IP54; Housing: IP65 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range compatibility | Lexium 32i |
| Device short name | BMI |
| Product or component type | Servo motor with power stage |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 26.000 cm |
| Package 1 Width | 20.000 cm |
| Package 1 Length | 59.000 cm |
| Package 1 Weight | 5.400 kg |
Drive unit of the integrated servo drive Lexium 32i. This integrated servo drive offers you a modular concept of drive unit, control unit and connection modules, which are plugged together according to the respective application. This BMI drive unit consists of the actual servo motor and the associated power level. The maximum standstill torque of the servo motor is 2.24 Nm. A single-phase mains connection with 110-120/200-240 VAC supplies the servo, for which the mains connection module VW3M9001 is required. The dimensions of the motor flange for fastening are 70 mm. The end of the motor shaft has a feather key and is designed for protection class IP54, while the motor housing is designed for IP65. The servo motor is composed of 2 power levels. The built-in Sin/Cos Hiperface absolute encoder is designed as a multiturn with 16 periods per revolution (32768 points/rev x 4096 revolutions). There is no holding brake. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.