| Complementary |
| Maximum mechanical speed | 8000 rpm |
| [Us] rated supply voltage | 115...230 V - 15...10 % |
| Supply voltage limits | 100…240 V |
| Network number of phases | Single phase |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency limits | 47.5…63 Hz |
| EMC filter | Integrated |
| Continuous output current | 2.6 A at 8 kHz |
| Output current 3s peak | 10.5 A at 230 V for 1 s |
| Continuous stall current | 2.6 A |
| Continuous stall torque | 2.48 N.m at 115...230 V single phase |
| Peak stall torque | 6.6 N.m at 115 V single phase; 6.6 N.m at 230 V single phase |
| Nominal output power | 700 W at 230 V single phase; 400 W at 115 V single phase |
| Nominal torque | 2.2 N.m at 115 V single phase; 1.7 N.m at 230 V single phase |
| Nominal speed | 4000 rpm at 230 V single phase; 1700 rpm at 115 V single phase |
| Maximum current Irms | 17.7 A at 230 V, single phase; 17.7 A at 115 V, single phase |
| Product compatibility | Drive control unit LXM32i CANopen; Drive control unit LXM32i EtherCAT |
| Shaft end | Untapped |
| Second shaft | Without second shaft end |
| Shaft diameter | 11 mm |
| Shaft length | 23 mm |
| Feedback type | Absolute single turn SinCos Hiperface |
| Speed feedback resolution | 131072 points/turn |
| Holding brake | With |
| Holding torque | 3 N.m holding brake |
| Mounting support | International standard flange |
| Motor flange size | 70 mm |
| Electrical connection | Printed circuit board connector |
| Torque constant | 0.63 N.m/A at 20 °C |
| Back emf constant | 42.1 V/krpm at 20 °C |
| Number of motor poles | 10 |
| Rotor inertia | 1.24 kg.cm² |
| Stator resistance | 2.7 Ohm at 20 °C |
| Stator inductance | 7.8 mH at 20 °C |
| Stator electrical time constant | 2.89 ms at 20 °C |
| Maximum radial force Fr | 710 N at 1000 rpm; 560 N at 2000 rpm; 490 N at 3000 rpm; 450 N at 4000 rpm; 410 N at 5000 rpm; 390 N at 6000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 5 W |
| Type of cooling | Natural convection |
| Length | 306 mm |
| Number of motor stacks | 2 |
| Centring collar diameter | 60 mm |
| Centring collar depth | 2.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 75…82 mm |
| Distance shaft shoulder-flange | 2.5 mm |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | Shaft: IP54; Housing: IP65 |
| Main |
| Range compatibility | Lexium 32i |
| Device short name | BMI |
| Product or component type | Servo motor with power stage |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 26.0 cm |
| Package 1 Width | 20.0 cm |
| Package 1 Length | 59.0 cm |
| Package 1 Weight | 5.4 kg |
Antriebseinheit des integrierter Servoantrieb Lexium 32i. Dieser integrierte Servoantriebe bietet Ihnen ein modulares Konzept aus Antriebseinheit, Steuereinheit und Anschlussmodulen an, das entsprechend der jeweiligen Anwendungen zusammengesteckt wird. Dabei besteht diese BMI-Antriebseinheit aus dem eigentlichen Servomotor und der zugehörigen Leistungsstufe. Das maximale Stillstandsdrehmoment des Servomotors beträgt 2,24 Nm. Ein einphasiger Netzanschluss mit 110-120/200-240 VAC versorgt den Servo, zu dem das Netzanschlussmodul VW3M9001 benötigt wird. Zur Befestigung betragen die Abmessungen des Motorflansches 70 mm. Das Ende der Motorwelle ist glatt und ist für die Schutzart IP54 konzipiert, während das Motorgehäuse für IP65 ausgelegt ist. Aus 2 Leistungsstufen ist der Servomotor zusammengesetzt. Der eingebaute Sin/Cos Hiperface Absolutwert-Encoder ist als Singleturn mit 128 Perioden pro Umdrehung (131072 Pkt/U) ausgeführt. Eine Haltebremse ist integriert. Zur Unterstützung Ihrer Nachhaltigkeitsziele werden detaillierte Informationen zu Materialinhalten, Umweltauswirkungen und Kreislaufwirtschaft bereitgestellt.