| Complementary |
| Range compatibility | Lexium 32 |
| [Us] rated supply voltage | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 21.5 A |
| Continuous power | 6.8 W |
| Maximum current Irms | 78.1 A for LXM32.D72N4 |
| Maximum permanent current | 78.1 A |
| Second shaft | Without second shaft end |
| Shaft diameter | 38 mm |
| Shaft length | 80 mm |
| Key width | 70 mm |
| Feedback type | Multiturn SinCos Hiperface |
| Holding torque | 80 N.m holding brake |
| Motor flange size | 205 mm |
| Number of motor stacks | 1 |
| Torque constant | 1.6 N.m/A |
| Back emf constant | 104 V/krpm at 120 °C |
| Number of motor poles | 5.0 |
| Rotor inertia | 87.4 kg.cm² |
| Stator resistance | 0.3 Ohm at 20 °C |
| Stator inductance | 2.95 mH at 20 °C |
| Stator electrical time constant | 19.7 ms at 20 °C |
| Maximum radial force Fr | 3730 N at 1000 rpm; 2960 N at 2000 rpm; 2580 N at 3000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 40 W |
| Type of cooling | Natural convection |
| Length | 370.5 mm |
| Centring collar diameter | 180 mm |
| Centring collar depth | 4 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 14 mm |
| Circle diameter of the mounting holes | 215 mm |
| Net weight | 37.9 kg |
| Sizing reference | BMH2051P |
| Accuracy error [angular] | 4.8 ° |
| Temperature copper hot | 135 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 78.1 A |
| Inertia | 16.0 kg.cm² of brake; 71.4 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BMH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 3800 rpm |
| Continuous stall torque | 34.4 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 34.4 N.m for LXM32.D72N4 at 24 A, 480 V, three phase |
| Peak stall torque | 103.4 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 103.4 N.m for LXM32.D72N4 at 24 A, 480 V, three phase |
| Nominal output power | 5400 W for LXM32.D72N4 at 24 A, 400 V, three phase; 5400 W for LXM32.D72N4 at 24 A, 480 V, three phase |
| Nominal torque | 25.8 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 25.8 N.m for LXM32.D72N4 at 24 A, 480 V, three phase |
| Nominal speed | 2000 rpm for LXM32.D72N4 at 24 A, 400 V, three phase; 2000 rpm for LXM32.D72N4 at 24 A, 480 V, three phase |
| Product compatibility | LXM32.D72N4 at 400...480 V three phase |
| Shaft end | Keyed |
| IP degree of protection | IP65 standard; IP67 with IP67 kit |
| Speed feedback resolution | 32768 points/turn x 4096 turns |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Straight connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 36.0 cm |
| Package 1 Width | 31.0 cm |
| Package 1 Length | 58.0 cm |
| Package 1 Weight | 43.0 kg |
BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited to applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 34.4 Nm and reaches a peak torque of 110 Nm. Its nominal speed is up to 3600 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 6.75 kW. The built-in encoder is designed as a multiturn with 16 periods/revolution (16x1024x4096) as a SinCos Hiperface. The electrical connection is made via straight M40 and M23 connectors. The motor flange for fastening is 205 mm. The drive shaft has a diameter of 38 mm. The shaft end is designed as a key and complies with protection class IP65. The motor housing complies with protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.