| Complementary |
| Range compatibility | Lexium 32 |
| [Us] rated supply voltage | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 18 A |
| Continuous power | 4.8 W |
| Maximum current Irms | 57.66 A for LXM32.D72N4 |
| Maximum permanent current | 62.3 A |
| Second shaft | Without second shaft end |
| Shaft diameter | 24 mm |
| Shaft length | 50 mm |
| Key width | 40 mm |
| Feedback type | Single turn SinCos Hiperface |
| Holding torque | 23 N.m holding brake |
| Motor flange size | 140 mm |
| Number of motor stacks | 3 |
| Torque constant | 1.3 N.m/A at 120 °C |
| Back emf constant | 85.9 V/krpm at 120 °C |
| Number of motor poles | 5.0 |
| Rotor inertia | 50.27 kg.cm² |
| Stator resistance | 0.22 Ohm at 20 °C |
| Stator inductance | 2.165 mH at 20 °C |
| Stator electrical time constant | 13.6 ms at 20 °C |
| Maximum radial force Fr | 2420 N at 1000 rpm; 1920 N at 2000 rpm; 1680 N at 3000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 19 W |
| Type of cooling | Natural convection |
| Length | 267 mm |
| Centring collar diameter | 130 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 11 mm |
| Circle diameter of the mounting holes | 165 mm |
| Net weight | 18.5 kg |
| Sizing reference | BMH1403P |
| Accuracy error [angular] | 4.8 ° |
| Temperature copper hot | 135 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 57.66 A |
| Inertia | 2.73 kg.cm² of brake; 47.543 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BMH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 4000 rpm |
| Continuous stall torque | 24 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 24 N.m for LXM32.D72N4 at 24 A, 480 V, three phase |
| Peak stall torque | 71.8 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 71.8 N.m for LXM32.D72N4 at 24 A, 480 V, three phase |
| Nominal output power | 4700 W for LXM32.D72N4 at 24 A, 400 V, three phase; 4700 W for LXM32.D72N4 at 24 A, 480 V, three phase |
| Nominal torque | 13.92 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 13.92 N.m for LXM32.D72N4 at 24 A, 480 V, three phase |
| Nominal speed | 3000 rpm for LXM32.D72N4 at 24 A, 400 V, three phase; 3000 rpm for LXM32.D72N4 at 24 A, 480 V, three phase |
| Product compatibility | LXM32.D72N4 at 400...480 V three phase |
| Shaft end | Keyed |
| IP degree of protection | IP65 standard; IP67 with IP67 kit |
| Speed feedback resolution | 32768 points/turn |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Rotatable right-angled connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 19.500 cm |
| Package 1 Width | 26.000 cm |
| Package 1 Length | 60.000 cm |
| Package 1 Weight | 19.429 kg |
| Unit Type of Package 2 | P06 |
| Number of Units in Package 2 | 8 |
| Package 2 Height | 75.000 cm |
| Package 2 Width | 80.000 cm |
| Package 2 Length | 60.000 cm |
| Package 2 Weight | 163.432 kg |
BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 22.5 Nm and achieves a peak torque of 72 Nm. Its nominal speed is up to 3000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 4370 W. The built-in encoder is designed as a single-turn with 16 periods/revolution (16x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 140 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is designed as a key and complies with protection class IP65. The motor housing complies with protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.