Schneider Electric BMH1402P16F1A, EAN: 3606485207728

Schneider Electric BMH1402P16F1A servo motor 18 4000 rpm shaft end with keyway and brake

Industrial Material > Engines and accessories

Schneider Electric BMH1402P16F1A servo motor 18 4000 rpm shaft end with keyway and brake

Lieske Part No. 739684
Mfg Part No BMH1402P16F1A
EAN-Code 3606485207728
Manufacturer Schneider Electric
Here only 2.268,75 EUR
2.699,81 EUR incl. VAT

Further information for Schneider Electric BMH1402P16F1A servo motor 18 4000 rpm shaft end with keyway and brake

Complementary
Range compatibilityLexium 32
[Us] rated supply voltage480 V
Network number of phasesThree phase
Continuous stall current16.83 A
Continuous power4.44 W
Maximum current Irms46.22 A for LXM32.D72N4
Maximum permanent current57.4 A
Second shaftWithout second shaft end
Shaft diameter24 mm
Shaft length50 mm
Key width40 mm
Feedback typeSingle turn SinCos Hiperface
Holding torque18 N.m holding brake
Motor flange size140 mm
Number of motor stacks2
Torque constant1.24 N.m/A at 120 °C
Back emf constant70.7 V/krpm at 120 °C
Number of motor poles5.0
Rotor inertia33.5 kg.cm²
Stator resistance0.23 Ohm at 20 °C
Stator inductance2.6 mH at 20 °C
Stator electrical time constant13 ms at 20 °C
Maximum radial force Fr2240 N at 1000 rpm; 1780 N at 2000 rpm; 1550 N at 3000 rpm
Maximum axial force Fa0.2 x Fr
Brake pull-in power18 W
Type of coolingNatural convection
Length227 mm
Centring collar diameter130 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter11 mm
Circle diameter of the mounting holes165 mm
Net weight14.3 kg
Sizing referenceBMH1402P
Accuracy error [angular]4.8 °
Temperature copper hot135 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Output current 3s peak46.22 A
Inertia1.5 kg.cm² of brake; 32.003 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Device short nameBMH
Product or component typeServo motor
Maximum mechanical speed4000 rpm
Continuous stall torque18.5 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 18.5 N.m for LXM32.D72N4 at 24 A, 480 V, three phase
Peak stall torque50.3 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 50.3 N.m for LXM32.D72N4 at 24 A, 480 V, three phase
Nominal output power3500 W for LXM32.D72N4 at 24 A, 400 V, three phase; 3500 W for LXM32.D72N4 at 24 A, 480 V, three phase
Nominal torque12.2 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 12.2 N.m for LXM32.D72N4 at 24 A, 480 V, three phase
Nominal speed3000 rpm for LXM32.D72N4 at 24 A, 400 V, three phase; 3000 rpm for LXM32.D72N4 at 24 A, 480 V, three phase
Product compatibilityLXM32.D72N4 at 400...480 V three phase
Shaft endKeyed
IP degree of protectionIP54 standard
Speed feedback resolution32768 points/turn
Holding brakeWith
Mounting supportInternational standard flange
Electrical connectionStraight connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height26.0 cm
Package 1 Width20.0 cm
Package 1 Length60.0 cm
Package 1 Weight14.6 kg
BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 16.8 Nm and reaches a peak torque of 50.4 Nm. Its nominal speed is up to 3000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 3550 W. The built-in encoder is designed as a single-turn with 16 periods/revolution (16x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 140 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is designed as a key and complies with protection class IP54. The motor housing corresponds to protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/739684
qrcode für Schneider Electric BMH1402P16F1A servo motor 18 4000 rpm shaft end with keyway and brake