Schneider Electric BMH1401P12F1A, EAN: 3606485198293

Schneider Electric BMH1401P12F1A servo motor 4000 rpm with brake

Industrial Material > Engines and accessories

Schneider Electric BMH1401P12F1A servo motor 4000 rpm with brake

Lieske Part No. 740744
Mfg Part No BMH1401P12F1A
EAN-Code 3606485198293
Manufacturer Schneider Electric
Here only 2.552,10 EUR
3.037,00 EUR incl. VAT

Further information for Schneider Electric BMH1401P12F1A servo motor 4000 rpm with brake

Complementary
Range compatibilityLexium 32
[Us] rated supply voltage480 V
Network number of phasesThree phase
Continuous stall current8.58 A
Continuous power2.85 W
Maximum current Irms29.8 A for LXM32.D30M2; 29.8 A for LXM32.D30N4
Maximum permanent current29.8 A
Second shaftWithout second shaft end
Shaft diameter24 mm
Shaft length50 mm
Key width40 mm
Feedback typeMultiturn SinCos Hiperface
Holding torque18 N.m holding brake
Motor flange size140 mm
Number of motor stacks1
Torque constant1.16 N.m/A at 120 °C
Back emf constant77.4 V/krpm at 120 °C
Number of motor poles5.0
Rotor inertia17.96 kg.cm²
Stator resistance0.69 Ohm at 20 °C
Stator inductance4.66 mH at 20 °C
Stator electrical time constant9.7 ms at 20 °C
Maximum radial force Fr1930 N at 1000 rpm; 1530 N at 2000 rpm; 1340 N at 3000 rpm
Maximum axial force Fa0.2 x Fr
Brake pull-in power18 W
Type of coolingNatural convection
Length187 mm
Centring collar diameter130 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter11 mm
Circle diameter of the mounting holes165 mm
Net weight10.3 kg
Sizing referenceBMH1401P
Accuracy error [angular]1.4 °
Temperature copper hot135 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Output current 3s peak29.8 A
Inertia1.5 kg.cm² of brake; 16.464 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Device short nameBMH
Product or component typeServo motor
Maximum mechanical speed4000 rpm
Continuous stall torque10.3 N.m for LXM32.D30M2 at 10 A, 230 V, single phase; 10.3 N.m for LXM32.D30N4 at 10 A, 400 V, three phase; 10.3 N.m for LXM32.D30N4 at 10 A, 480 V, three phase
Peak stall torque30.8 N.m for LXM32.D30M2 at 10 A, 230 V, single phase; 30.8 N.m for LXM32.D30N4 at 10 A, 400 V, three phase; 30.8 N.m for LXM32.D30N4 at 10 A, 480 V, three phase
Nominal output power1450 W for LXM32.D30M2 at 10 A, 230 V, single phase; 2400 W for LXM32.D30N4 at 10 A, 400 V, three phase; 2400 W for LXM32.D30N4 at 10 A, 480 V, three phase
Nominal torque6.9 N.m for LXM32.D30M2 at 10 A, 230 V, single phase; 7.7 N.m for LXM32.D30N4 at 10 A, 400 V, three phase; 7.7 N.m for LXM32.D30N4 at 10 A, 480 V, three phase
Nominal speed2000 rpm for LXM32.D30M2 at 10 A, 230 V, single phase; 3000 rpm for LXM32.D30N4 at 10 A, 400 V, three phase; 3000 rpm for LXM32.D30N4 at 10 A, 480 V, three phase
Product compatibilityLXM32.D30M2 at 230 V single phase; LXM32.D30N4 at 400...480 V three phase
Shaft endKeyed
IP degree of protectionIP54 standard
Speed feedback resolution131072 points/turn x 4096 turns
Holding brakeWith
Mounting supportInternational standard flange
Electrical connectionStraight connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height26.0 cm
Package 1 Width20.0 cm
Package 1 Length60.0 cm
Package 1 Weight10.6 kg
BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 10 Nm and reaches a peak torque of 30 Nm. Its nominal speed is up to 3500 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 2620 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 140 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is designed as a key and complies with protection class IP54. The motor housing corresponds to protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/740744
qrcode für Schneider Electric BMH1401P12F1A servo motor 4000 rpm with brake