| Complementary |
| Range compatibility | Lexium 32 |
| [Us] rated supply voltage | 480 V |
| Network number of phases | Three phase |
| Continuous stall current | 8.58 A |
| Continuous power | 2.85 W |
| Maximum current Irms | 29.8 A for LXM32.D30M2; 29.8 A for LXM32.D30N4 |
| Maximum permanent current | 29.8 A |
| Second shaft | Without second shaft end |
| Shaft diameter | 24 mm |
| Shaft length | 50 mm |
| Key width | 40 mm |
| Feedback type | Single turn SinCos Hiperface |
| Motor flange size | 140 mm |
| Number of motor stacks | 1 |
| Torque constant | 1.16 N.m/A at 120 °C |
| Back emf constant | 77.4 V/krpm at 120 °C |
| Number of motor poles | 5.0 |
| Rotor inertia | 16.46 kg.cm² |
| Stator resistance | 0.69 Ohm at 20 °C |
| Stator inductance | 4.66 mH at 20 °C |
| Stator electrical time constant | 9.7 ms at 20 °C |
| Maximum radial force Fr | 1930 N at 1000 rpm; 1530 N at 2000 rpm; 1340 N at 3000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Type of cooling | Natural convection |
| Length | 152 mm |
| Centring collar diameter | 130 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 11 mm |
| Circle diameter of the mounting holes | 165 mm |
| Net weight | 8 kg |
| Sizing reference | BMH1401P |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 135 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 29.8 A |
| Inertia | 0.0 kg.cm² of brake; 16.464 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BMH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 4000 rpm |
| Continuous stall torque | 10.3 N.m for LXM32.D30M2 at 10 A, 230 V, single phase; 10.3 N.m for LXM32.D30N4 at 10 A, 400 V, three phase; 10.3 N.m for LXM32.D30N4 at 10 A, 480 V, three phase |
| Peak stall torque | 30.8 N.m for LXM32.D30M2 at 10 A, 230 V, single phase; 30.8 N.m for LXM32.D30N4 at 10 A, 400 V, three phase; 30.8 N.m for LXM32.D30N4 at 10 A, 480 V, three phase |
| Nominal output power | 1450 W for LXM32.D30M2 at 10 A, 230 V, single phase; 2400 W for LXM32.D30N4 at 10 A, 400 V, three phase; 2400 W for LXM32.D30N4 at 10 A, 480 V, three phase |
| Nominal torque | 6.9 N.m for LXM32.D30M2 at 10 A, 230 V, single phase; 7.7 N.m for LXM32.D30N4 at 10 A, 400 V, three phase; 7.7 N.m for LXM32.D30N4 at 10 A, 480 V, three phase |
| Nominal speed | 2000 rpm for LXM32.D30M2 at 10 A, 230 V, single phase; 3000 rpm for LXM32.D30N4 at 10 A, 400 V, three phase; 3000 rpm for LXM32.D30N4 at 10 A, 480 V, three phase |
| Product compatibility | LXM32.D30M2 at 230 V single phase; LXM32.D30N4 at 400...480 V three phase |
| Shaft end | Keyed |
| IP degree of protection | IP54 standard |
| Speed feedback resolution | 131072 points/turn |
| Holding brake | Without |
| Mounting support | International standard flange |
| Electrical connection | Rotatable right-angled connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 20.0 cm |
| Package 1 Width | 27.0 cm |
| Package 1 Length | 59.0 cm |
| Package 1 Weight | 9.864 kg |
| Unit Type of Package 2 | P06 |
| Number of Units in Package 2 | 12 |
| Package 2 Height | 77.0 cm |
| Package 2 Width | 80.0 cm |
| Package 2 Length | 60.0 cm |
| Package 2 Weight | 126.868 kg |
BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 10 Nm and reaches a peak torque of 30 Nm. Its nominal speed is up to 3500 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 2620 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 140 mm for fastening. The drive shaft has a diameter of 24 mm. The shaft end is designed as a key and complies with protection class IP54. The motor housing corresponds to protection class IP65. There is no holding brake. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.