| Complementary |
| Range compatibility | Lexium 32 |
| [Us] rated supply voltage | 240 V |
| Network number of phases | Three phase |
| Continuous stall current | 10 A |
| Continuous power | 2.62 W |
| Maximum current Irms | 34.7 A for LXM32.D30M2 |
| Maximum permanent current | 33.85 A |
| Second shaft | Without second shaft end |
| Shaft diameter | 19 mm |
| Shaft length | 40 mm |
| Key width | 30 mm |
| Feedback type | Single turn SinCos Hiperface |
| Holding torque | 9 N.m holding brake |
| Motor flange size | 100 mm |
| Number of motor stacks | 3 |
| Torque constant | 0.82 N.m/A at 120 °C |
| Back emf constant | 54.8 V/krpm at 120 °C |
| Number of motor poles | 5.0 |
| Rotor inertia | 10.3 kg.cm² |
| Stator resistance | 0.47 Ohm at 20 °C |
| Stator inductance | 1.355 mH at 20 °C |
| Stator electrical time constant | 6.4 ms at 20 °C |
| Maximum radial force Fr | 1050 N at 1000 rpm; 830 N at 2000 rpm; 730 N at 3000 rpm; 660 N at 4000 rpm; 610 N at 5000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 18 W |
| Type of cooling | Natural convection |
| Length | 234.3 mm |
| Centring collar diameter | 95 mm |
| Centring collar depth | 3.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 9 mm |
| Circle diameter of the mounting holes | 115 mm |
| Net weight | 8.15 kg |
| Sizing reference | BMH1003T |
| Accuracy error [angular] | 4.8 ° |
| Temperature copper hot | 135 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 34.7 A |
| Inertia | 0.93 kg.cm² of brake; 9.371 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BMH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 6000 rpm |
| Continuous stall torque | 8.2 N.m for LXM32.D30M2 at 10 A, 230 V, single phase |
| Peak stall torque | 22.8 N.m for LXM32.D30M2 at 10 A, 230 V, single phase |
| Nominal output power | 1450 W for LXM32.D30M2 at 10 A, 230 V, single phase |
| Nominal torque | 5.6 N.m for LXM32.D30M2 at 10 A, 230 V, single phase |
| Nominal speed | 2500 rpm for LXM32.D30M2 at 10 A, 230 V, single phase |
| Product compatibility | LXM32.D30M2 at 230 V single phase |
| Shaft end | Keyed |
| IP degree of protection | IP54 standard |
| Speed feedback resolution | 32768 points/turn |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Straight connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 15.6 cm |
| Package 1 Width | 22.1 cm |
| Package 1 Length | 44.6 cm |
| Package 1 Weight | 8.45 kg |
| Unit Type of Package 2 | S06 |
| Number of Units in Package 2 | 10 |
| Package 2 Height | 73.5 cm |
| Package 2 Width | 60 cm |
| Package 2 Length | 80 cm |
| Package 2 Weight | 89 kg |
BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 7.5 Nm and achieves a peak torque of 25.5 Nm. Its nominal speed is up to 3000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 2280 W. The built-in encoder is designed as a single-turn with 16 periods/revolution (16x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors in a straight design. The motor flange is 100 mm for fastening. The drive shaft has a diameter of 19 mm. The shaft end is designed as a key and complies with protection class IP54. The motor housing corresponds to protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.