Schneider Electric BMH1003T16A2A, EAN: 3606485198019

Schneider Electric BMH1003T16A2A servo motor 8 6000 rpm shaft end with keyway

Industrial Material > Engines and accessories

Schneider Electric BMH1003T16A2A servo motor 8 6000 rpm shaft end with keyway

Lieske Part No. 735111
Mfg Part No BMH1003T16A2A
EAN-Code 3606485198019
Manufacturer Schneider Electric
Here only 1.473,01 EUR
1.752,88 EUR incl. VAT

Further information for Schneider Electric BMH1003T16A2A servo motor 8 6000 rpm shaft end with keyway

Complementary
Range compatibilityLexium 32
[Us] rated supply voltage240 V
Network number of phasesThree phase
Continuous stall current10 A
Continuous power2.62 W
Maximum current Irms34.7 A for LXM32.D30M2
Maximum permanent current33.85 A
Second shaftWithout second shaft end
Shaft diameter19 mm
Shaft length40 mm
Key width30 mm
Feedback typeSingle turn SinCos Hiperface
Motor flange size100 mm
Number of motor stacks3
Torque constant0.82 N.m/A at 120 °C
Back emf constant54.8 V/krpm at 120 °C
Number of motor poles5.0
Rotor inertia9.37 kg.cm²
Stator resistance0.47 Ohm at 20 °C
Stator inductance1.355 mH at 20 °C
Stator electrical time constant6.4 ms at 20 °C
Maximum radial force Fr1050 N at 1000 rpm; 830 N at 2000 rpm; 730 N at 3000 rpm; 660 N at 4000 rpm; 610 N at 5000 rpm
Maximum axial force Fa0.2 x Fr
Type of coolingNatural convection
Length192.6 mm
Centring collar diameter95 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter9 mm
Circle diameter of the mounting holes115 mm
Net weight6.5 kg
Sizing referenceBMH1003T
Accuracy error [angular]4.8 °
Temperature copper hot135 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Output current 3s peak34.7 A
Inertia0.0 kg.cm² of brake; 9.371 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Device short nameBMH
Product or component typeServo motor
Maximum mechanical speed6000 rpm
Continuous stall torque8.2 N.m for LXM32.D30M2 at 10 A, 230 V, single phase
Peak stall torque22.8 N.m for LXM32.D30M2 at 10 A, 230 V, single phase
Nominal output power1450 W for LXM32.D30M2 at 10 A, 230 V, single phase
Nominal torque5.6 N.m for LXM32.D30M2 at 10 A, 230 V, single phase
Nominal speed2500 rpm for LXM32.D30M2 at 10 A, 230 V, single phase
Product compatibilityLXM32.D30M2 at 230 V single phase
Shaft endKeyed
IP degree of protectionIP54 standard
Speed feedback resolution32768 points/turn
Holding brakeWithout
Mounting supportInternational standard flange
Electrical connectionRotatable right-angled connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height19.900 cm
Package 1 Width22.900 cm
Package 1 Length40.600 cm
Package 1 Weight7.608 kg
Unit Type of Package 2S06
Number of Units in Package 210
Package 2 Height73.500 cm
Package 2 Width60.000 cm
Package 2 Length80.000 cm
Package 2 Weight80.500 kg
BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 7.5 Nm and achieves a peak torque of 25.5 Nm. Its nominal speed is up to 3000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 2280 W. The built-in encoder is designed as a single-turn with 16 periods/revolution (16x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 100 mm for fastening. The drive shaft has a diameter of 19 mm. The shaft end is designed as a key and complies with protection class IP54. The motor housing corresponds to protection class IP65. There is no holding brake. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/735111
qrcode für Schneider Electric BMH1003T16A2A servo motor 8 6000 rpm shaft end with keyway