Schneider Electric BMH1003P21F2A, EAN: 3606485200620

Schneider Electric BMH1003P21F2A servo motor 8 6000 rpm smooth shaft end with brake IP65

Industrial Material > Engines and accessories

Schneider Electric BMH1003P21F2A servo motor 8 6000 rpm smooth shaft end with brake IP65

Lieske Part No. 734562
Mfg Part No BMH1003P21F2A
EAN-Code 3606485200620
Manufacturer Schneider Electric
Here only 2.042,68 EUR
2.430,79 EUR incl. VAT

Further information for Schneider Electric BMH1003P21F2A servo motor 8 6000 rpm smooth shaft end with brake IP65

Complementary
Range compatibilityLexium 32
[Us] rated supply voltage480 V
Network number of phasesThree phase
Continuous stall current7.69 A
Continuous power3.3 W
Maximum current Irms26.71 A for LXM32.D30N4
Maximum permanent current29.1 A
Second shaftWithout second shaft end
Shaft diameter19 mm
Shaft length40 mm
Feedback typeSingle turn SinCos Hiperface
Holding torque9 N.m holding brake
Motor flange size100 mm
Number of motor stacks3
Torque constant1.17 N.m/A at 120 °C
Back emf constant63.5 V/krpm at 120 °C
Number of motor poles5.0
Rotor inertia10.3 kg.cm²
Stator resistance0.63 Ohm at 20 °C
Stator inductance2.615 mH at 20 °C
Stator electrical time constant6.3 ms at 20 °C
Maximum radial force Fr1050 N at 1000 rpm; 830 N at 2000 rpm; 730 N at 3000 rpm; 660 N at 4000 rpm; 610 N at 5000 rpm
Maximum axial force Fa0.2 x Fr
Brake pull-in power18 W
Type of coolingNatural convection
Length234.3 mm
Centring collar diameter95 mm
Centring collar depth3.5 mm
Number of mounting holes4
Mounting holes diameter9 mm
Circle diameter of the mounting holes115 mm
Net weight8.15 kg
Sizing referenceBMH1003P
Accuracy error [angular]1.4 °
Temperature copper hot135 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Output current 3s peak26.71 A
Inertia0.93 kg.cm² of brake; 9.371 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Main
Device short nameBMH
Product or component typeServo motor
Maximum mechanical speed6000 rpm
Continuous stall torque8.4 N.m for LXM32.D30N4 at 10 A, 400 V, three phase; 8.4 N.m for LXM32.D30N4 at 10 A, 480 V, three phase
Peak stall torque25.1 N.m for LXM32.D30N4 at 10 A, 400 V, three phase; 25.1 N.m for LXM32.D30N4 at 10 A, 480 V, three phase
Nominal output power2700 W for LXM32.D30N4 at 10 A, 400 V, three phase; 2700 W for LXM32.D30N4 at 10 A, 480 V, three phase
Nominal torque6.2 N.m for LXM32.D30N4 at 10 A, 400 V, three phase; 6.2 N.m for LXM32.D30N4 at 10 A, 480 V, three phase
Nominal speed4000 rpm for LXM32.D30N4 at 10 A, 400 V, three phase; 4000 rpm for LXM32.D30N4 at 10 A, 480 V, three phase
Product compatibilityLXM32.D30N4 at 400...480 V three phase
Shaft endSmooth shaft
IP degree of protectionIP65 standard; IP67 with IP67 kit
Speed feedback resolution131072 points/turn
Holding brakeWith
Mounting supportInternational standard flange
Electrical connectionRotatable right-angled connectors
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height20.200 cm
Package 1 Width40.700 cm
Package 1 Length22.900 cm
Package 1 Weight8.588 kg
Unit Type of Package 2S06
Number of Units in Package 210
Package 2 Height73.500 cm
Package 2 Width60.000 cm
Package 2 Length80.000 cm
Package 2 Weight90.300 kg
BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 9.0 Nm and achieves a peak torque of 27.0 Nm. Its nominal speed is up to 5000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 2500 W. The built-in encoder is designed as a single-turn with 128 periods/revolution (128x1024) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 100 mm for fastening. The drive shaft has a diameter of 19 mm. The shaft end is smooth and conforms to protection class IP65. The motor housing conforms to protection class IP65. A holding brake is integrated. The servo amplifiers from the Lexium LXM32 series are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/734562
qrcode für Schneider Electric BMH1003P21F2A servo motor 8 6000 rpm smooth shaft end with brake IP65