| Additional features |
| Compatible product family | Lexium 32 |
| [UH,nom] Rated operating voltage | 240 V |
| Number of power phases | 3-phase supply |
| Standstill continuous current | 5,55 A |
| Continuous power | 1,68 W |
| Maximum current Irms | 17.84 A for LXM32.D30M2; 17.8 A for LXM32.D18M2 |
| Max. continuous current | 17,84 A |
| Second wave | Without second shaft end |
| Shaft diameter | 14 mm |
| Wavelength | 30 mm |
| Type of feedback | Multiturn SinCos-Hiperface |
| Motor flange size | 70 mm |
| Number of motor stages | 3 |
| Torque constant | 0.61 Nm/A at 120 °C |
| Constant of back electromotive force | 39.3 V/krpm at 120 °C |
| Number of motor poles | 5,0 |
| Rotor inertia | 1,67 kg.cm² |
| Stator resistance | 1.32 Ohm at 20 °C |
| Stator inductance | 2.07 mH at 20 °C |
| Stator electrical time constant | 3.3 ms at 20 °C |
| Max. radial force (FR) | 730 N at 1000 rpm; 580 N at 2000 rpm; 510 N at 3000 rpm; 460 N at 4000 rpm; 430 N at 5000 rpm; 400 N at 6000 rpm |
| Max. axial force (FA) | 0,2 x Fr |
| Cooling type | Natural convection |
| Length | 186 mm |
| Diameter of centring ring | 60 mm |
| Depth of centring ring | 2,5 mm |
| Number of mounting holes | 4 |
| Diameter of mounting holes | 5,5 mm |
| Mounting hole circle diameter | 82 mm |
| Product weight | 3 kg |
| Rated reference | BMH0703T |
| Accuracy error (angular) | 1,4 ° |
| Copper temperature hot | 135 °C |
| Magnet temperature hot | 100 °C |
| Magnet temperature RT | 20 °C |
| Output current 3s peak | 17,84 A |
| Inertia | 0.0 kg.cm² of brake; 1.674 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Device short name | BMH |
| Product or component type | Servomotor |
| Max. mechanical speed | 8000 rpm |
| Wave end | Plain shaft |
| Degree of protection (IP) | IP65 standard; IP67 with IP 67-set |
| Speed feedback resolution | 131072 points/revolution x 4096 revolutions |
| Hold brake | None |
| Mounting bracket | International standard flange |
| Electrical connection | Rotatable angle connectors |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 11,8 cm |
| VPE 1 width | 17,5 cm |
| VPE 1 length | 37,8 cm |
| Packaging weight (Lbs) | 2,2 kg |
| VPE 2 type | S06 |
| VPE 2 quantity | 24 |
| VPE 2 height | 73,5 cm |
| VPE 2 width | 60 cm |
| VPE 2 length | 80 cm |
| VPE 2 weight | 57,3 kg |
BMH servo motor from the Lexium 32 servo drive series. The BMH series of three-phase AC servo motors has a medium rotor moment of inertia and is perfectly suited for applications with high loads. Thanks to the winding technology, a very high power density is achieved in a compact design. This servo has a nominal continuous stall torque of 3.4 Nm and achieves a peak torque of 10.2 Nm. Its nominal speed is up to 4000 rpm depending on the supply voltage. This results in a voltage-dependent nominal power of up to 1130 W. The built-in encoder is designed as a multiturn with 128 periods/revolution (128x1024x4096) as a SinCos Hiperface. The electrical connection is made via 2x M23 connectors, angled by 90° and rotatable. The motor flange is 70 mm for fastening. The drive shaft has a diameter of 14 mm. The shaft end is smooth and conforms to protection class IP65. The motor housing conforms to protection class IP65. There is no holding brake. The Lexium LXM32 series servo drives are recommended for operating the synchronous motor. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.