| Complementary |
| Range compatibility | Lexium 32 |
| [Us] rated supply voltage | 240 V |
| Network number of phases | Three phase |
| Continuous stall current | 5.55 A |
| Continuous power | 1.68 W |
| Maximum current Irms | 17.84 A for LXM32.D30M2; 17.8 A for LXM32.D18M2 |
| Maximum permanent current | 17.84 A |
| Second shaft | Without second shaft end |
| Shaft diameter | 14 mm |
| Shaft length | 30 mm |
| Key width | 20 mm |
| Feedback type | Single turn SinCos Hiperface |
| Holding torque | 3 N.m holding brake |
| Motor flange size | 70 mm |
| Number of motor stacks | 3 |
| Torque constant | 0.61 N.m/A at 120 °C |
| Back emf constant | 39.3 V/krpm at 120 °C |
| Number of motor poles | 5.0 |
| Rotor inertia | 1.78 kg.cm² |
| Stator resistance | 1.32 Ohm at 20 °C |
| Stator inductance | 2.07 mH at 20 °C |
| Stator electrical time constant | 3.3 ms at 20 °C |
| Maximum radial force Fr | 730 N at 1000 rpm; 580 N at 2000 rpm; 510 N at 3000 rpm; 460 N at 4000 rpm; 430 N at 5000 rpm; 400 N at 6000 rpm |
| Maximum axial force Fa | 0.2 x Fr |
| Brake pull-in power | 7 W |
| Type of cooling | Natural convection |
| Length | 225 mm |
| Centring collar diameter | 60 mm |
| Centring collar depth | 2.5 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 5.5 mm |
| Circle diameter of the mounting holes | 82 mm |
| Net weight | 4 kg |
| Sizing reference | BMH0703T |
| Accuracy error [angular] | 1.4 ° |
| Temperature copper hot | 135 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Output current 3s peak | 17.84 A |
| Inertia | 0.11 kg.cm² of brake; 1.674 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Device short name | BMH |
| Product or component type | Servo motor |
| Maximum mechanical speed | 8000 rpm |
| Continuous stall torque | 3.4 N.m for LXM32.D30M2 at 10 A, 115 V, single phase; 3.4 N.m for LXM32.D18M2 at 6 A, 230 V, single phase |
| Peak stall torque | 8.7 N.m for LXM32.D30M2 at 10 A, 115 V, single phase; 10.2 N.m for LXM32.D18M2 at 6 A, 230 V, single phase |
| Nominal output power | 650 W for LXM32.D30M2 at 10 A, 115 V, single phase; 900 W for LXM32.D18M2 at 6 A, 230 V, single phase |
| Nominal torque | 3.1 N.m for LXM32.D30M2 at 10 A, 115 V, single phase; 2.9 N.m for LXM32.D18M2 at 6 A, 230 V, single phase |
| Nominal speed | 2000 rpm for LXM32.D30M2 at 10 A, 115 V, single phase; 3000 rpm for LXM32.D18M2 at 6 A, 230 V, single phase |
| Product compatibility | LXM32.D30M2 at 115 V single phase; LXM32.D18M2 at 230 V single phase |
| Shaft end | Keyed |
| IP degree of protection | IP54 standard |
| Speed feedback resolution | 131072 points/turn |
| Holding brake | With |
| Mounting support | International standard flange |
| Electrical connection | Rotatable right-angled connectors |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.8 cm |
| Package 1 Width | 17.5 cm |
| Package 1 Length | 37.8 cm |
| Package 1 Weight | 3.2 kg |
| Unit Type of Package 2 | S06 |
| Number of Units in Package 2 | 24 |
| Package 2 Height | 73.5 cm |
| Package 2 Width | 60 cm |
| Package 2 Length | 80 cm |
| Package 2 Weight | 81.3 kg |
The servomotor BMH0703T11F2A from Schneider Electric belongs to the Lexium 32 product family and is designed as a three-phase AC servomotor for industrial applications with high load requirements. It features a medium rotor inertia and enables a compact design with high power density, achieved through the used winding technology. The motor is designed for use with servodrives from the Lexium 32 series and offers a maximum mechanical speed of 8000 rpm. The rated speed is 2000 rpm at 115 V or 3000 rpm at 230 V, with corresponding rated power of 650 W and 900 W. The continuous torque at standstill is 3.4 Nm, and the peak stall torque reaches up to 10.2 Nm at 230 V operation.
Applications
The servomotor is suitable for applications in industrial machine building, particularly in systems requiring high dynamic demands on torque and speed. Typical applications include machine tools, positioning drives, packaging machines, and other automated production systems where precise motion control and high load stability are required. The integrated holding brake with a holding torque of 3 Nm ensures safe positioning at standstill, which is especially important for vertical or inclined axes.
Functions and Equipment in Detail
The motor features an integrated encoder with SinCos Hiperface Singleturn technology, providing a resolution of 131072 points per revolution. This ensures high positioning accuracy with an angular accuracy error of 1.4°. Feedback is provided via an electrical interface optimized for communication with the servodrive. The shaft end is designed with a keyway, with a shaft diameter of 14 mm and a shaft length of 30 mm. Mounting is done via an international standard flange with a 70 mm diameter, featuring four mounting holes with a diameter of 5.5 mm and a circle diameter of 82 mm.
Technology Explained Simply
The winding technology ensures high power density, meaning the motor can achieve high torques and speeds despite its compact design. Cooling is achieved through natural convection, increasing maintenance-free operation. Electrical supply is via 3-phase voltage with a rated voltage of 240 V. Electrical connection is made via rotatable angled connectors (2x M23), bent at 90°, enabling flexible installation. The maximum radial force is 730 N at 1000 rpm and decreases with increasing speed, while the maximum axial force is 0.2 times the radial force.
Compatibility and Accessories
The servomotor is compatible with servodrives from the Lexium 32 series, particularly models LXM32.D30M2 (115 V) and LXM32.D18M2 (230 V). As accessories, encoder cables such as VW3M8102R30 (3 m) or VW3M8102R15 (1.5 m) are available, ensuring a secure connection to the drive. Additionally, brake resistors such as VW3A7607R20 (72 Ω, 0.4 kW) or gearboxes such as GBX120040K (reduction ratio 40:1) can be combined to adapt drive performance to specific requirements.
Mounting and Installation
Mounting is done via the standard flange with 70 mm diameter. The hole configuration (4 holes, 5.5 mm diameter, 82 mm circle diameter) allows easy integration into existing machine constructions. The rotatable angled connectors simplify cable connection, especially in tight mounting areas. The shaft end protection class IP54 and motor housing protection class IP65 protect against dust and splashing water, enabling use in industrial environments with increased contamination risk.
Advantages in Operation
The motor offers high operational safety due to the integrated holding brake and precise positioning thanks to the high-resolution encoder. Natural cooling reduces maintenance effort, and the compact design enables efficient space utilization in machines. The high power density and medium inertia ensure balanced dynamics, remaining stable under high loads and during rapid motion changes. Compatibility with the Lexium 32 family ensures seamless integration into existing control systems.