Schneider Electric BMENOC0301C, EAN: 3606480713910

Schneider Electric BMENOC0301C Ethernet communication module E-Rack CC

Industrial Material > Automation > Industrial bus systems

Schneider Electric BMENOC0301C Ethernet communication module E-Rack CC

Lieske Part No. 1868863
Mfg Part No BMENOC0301C
EAN-Code 3606480713910
Manufacturer Schneider Electric
Here only 1.541,12 EUR
1.833,93 EUR incl. VAT

Further information for Schneider Electric BMENOC0301C Ethernet communication module E-Rack CC

Complementary
Product compatibilityModicon M580 standalone CPU (BMEP58…..); Modicon M580 Redundant CPU (BMEH58…..); Modicon M580 safety CPU (non interfering type 1) (BMEP582…..); Modicon M580 safety Redundant CPU (non interfering type 1) (BMEH582…..); Modicon X80 Rack with Ethernet backplane (BMEXBP…..)
Mounting locationMain rack
Backplane slot locationEthernet + X-bus Slot
Slot occupied by module1
Maximum number of modules per rack4
SupplyInternal power supply via rack
Integrated connection type3 Ethernet, connector type: RJ45, transmission rate: 10/100 Mbit/s, transmission mode: double shielded twisted pair
Transmission support mediumEthernet backplane
Communication serviceBandwidth management; FDR server; SNMP network administrator; Modbus TCP I/O Scanner and Messaging; Ethernet/IP I/O Scanner and Messaging; RSTP support; Port mirroring; Embedded multiport switch
Web serverFor commissioning, operational and maintenance
Current consumption900 mA at 3.3 V DC (for product version >= 13); 1800 mA at 3.3 V DC (for product version < 13)
Local signalling1 LED (green) for processor running (RUN); 1 LED (red) for processor or system fault (ERR); 1 LED (green/red) for ETH MS (Ethernet port configuration status); 1 LED (green/red) for Eth NS (Ethernet network status)
Width32 mm
Height103.7 mm
Length86 mm
Net weight0.2 kg
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20
Protective treatmentConformal coating
Ambient air temperature for operation0…60 °C
MarkingCE
Product certificationsCE; UL; CSA; RCM; EAC; Merchant Navy; ATEX zone 2/22; IECEx zone 2/22
StandardsIEC 61131-2; IEC 61010-2-201; UL 61010-2-201; CSA C22.2 No 61010-2-201; IACS E10; IEC 61000-6-5, interface type 1 and type 2; IEC 61850-3, location G; IEC 60079-0
Directives2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility; 2014/34/EU - ATEX directive
Environmental characteristicGas resistant class Gx conforming to ISA S71.04; Gas resistant class 3C4 conforming to IEC 60721-3-3; Dust resistant class 3S4 conforming to IEC 60721-3-3; Sand resistant class 3S4 conforming to IEC 60721-3-3; Salt resistant level 2 conforming to IEC 68252; Mold growth resistant class 3B2 conforming to IEC 60721-3-3; Fungal spore resistant class 3B2 conforming to IEC 60721-3-3; Hazardous location class I division 2
Logistical informations
Country of originFR
Main
Range of productModicon M580
Product or component typeCommunication module
Device applicationCommunication
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.500 cm
Package 1 Width11.000 cm
Package 1 Length11.800 cm
Package 1 Weight263.000 g
Unit Type of Package 2S02
Number of Units in Package 215
Package 2 Height15.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight4.300 kg
This communication module is part of the Modicon M580 range, a range of programmable automation controllers (PACs) and safety-related programmable logic controllers (PLCs) with integrated Ethernet. The BMENOC0301C module serves as an interface between the M580 PLC and other Ethernet network devices using the Modbus/TCP and EtherNet/IP communication protocols. Thanks to a conformal coating on the printed circuit board, this product can be used in harsh environments with a temperature range of -25°C to +60°C/-13°F to 140°F. This product can help hybrid manufacturers achieve a better, measurable and earlier ROI and recover their project investment by up to 100% in less than three months. The BMENOP300C module has 3 Ethernet ports. Communication services are bandwidth management, FDR server, Modbus TCP I/O scanner and reporting, EtherNet/IP I/O scanner and reporting. Also built-in 4-port switch, RSTP support, SNMP network administrator, built-in multiport switch, etc. It measures 32x100x86mm and weighs 0.2kg. This module meets the requirements of applications in transportation, water and wastewater, consumer packaged goods, mining, minerals, metals, power generation, energy and chemical, and data center. This product meets CE, UL, CSA, RCM, EAC, UKCA and ATEX/IECEx Zone 2/22 standards and is certified for power generation, merchant marine, railway and hazardous area applications. This connection module is compatible with the entire range of M580 CPUs and must be installed on a BMEXBPxxx - Ethernet + X-Bus rack. The communication module occupies one slot in the rack. This product can be used in combination with Modicon X80 (I/O, rack, cables) and works with the EcoStruxure Control Expert programming software.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1868863
qrcode für Schneider Electric BMENOC0301C Ethernet communication module E-Rack CC