| Additional features |
| Dielectric losses | < 0.2 W/kvar |
| Power losses | < 0.5 W/kVAr |
| Capacitor tolerance | -5 % to 10 % |
| Voltage testing | 2.15 x Un AC between terminals for 10 s; = 660 V - 6 kV AC between terminal and enclosure for 10 s |
| Inrush current | 250 x In |
| Max. switching operations per year | 7000 |
| Lifespan in hours | 130000 h |
| Dielectric material | Metallized polypropylene film with Zn/Al alloy, special resistance & profile, special edge (wave cut) |
| Impregnating material | Non-PCB dried PUR resin; Biodegradable |
| Installation type | Indoor installation |
| Connections - terminals | ClampTite terminal |
| Mounting mode | Upright/horizontal |
| Diameter | 136 mm |
| Height | 242 mm |
| Product weight | 3,2 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product series | PowerLogic |
| Product or component type | Heavy-duty capacitor |
| Product name | PowerLogic PFC Capacitor |
| Network frequency | 50/60 Hz |
| Series name | Heavy Duty |
| Electrical parameters | 29.2 kvar 575 V 50 Hz; 35 kvar 575 V 60 Hz |
| Max. permissible voltage | 1.1 x Un (8 hours over 24 hours) |
| Continuous overload resistance | 1.8 x inch |
| Nominal voltage | 575 V AC 50/60 Hz |
| Mounting |
| Standards | IEC 60831-2; IEC 60831-1 |
| Degree of protection (IP) | IP20 |
| Operating altitude | 2.000 m |
| Temperature class | D |
| Operating ambient temperature | -25…55 °C |
| Relative humidity | 95 % |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 19,000 cm |
| VPE 1 width | 19,000 cm |
| VPE 1 length | 31,000 cm |
| Packaging weight (Lbs) | 3,836 kg |
| VPE 2 type | S04 |
| VPE 2 quantity | 3 |
| VPE 2 height | 30,000 cm |
| VPE 2 width | 40,000 cm |
| VPE 2 length | 60,000 cm |
| VPE 2 weight | 12,158 kg |
| VPE 3 type | P06 |
| VPE 3 quantity | 12 |
| VPE 3 height | 73,500 cm |
| VPE 3 width | 60,000 cm |
| VPE 3 length | 80,000 cm |
| VPE 3 weight | 68,791 kg |
PowerLogic PFC Kondensatoren sind eine zuverlässige und flexible Lösung für die Blindleistungskompensation unter anspruchsvollen Betriebsbedingungen. Diese Kondensatoren werden vor allem bei höheren Spannungsstörungen oder bei Vorliegen geringer nichtlinearer Lasten eingesetzt. Der Nennstrom der Kondensatoren muss erhöht werden, um die Belastung durch den Oberschwingungsstrom zu bewältigen. Dieser Kondensator liefert eine Nennausgangsleistung von 29,2 kVar bei 575V AC, 50 Hz. Die Befestigung wird durch eine ClampTite-Klemme gewährleistet. Diese Komponente entspricht den Normen IEC 60831-1 und IEC 60831-2. Das Gewicht des Produktes im Gehäuse beträgt 3,2 kg.