| Additional features |
| Dielectric losses | < 0.2 W/kvar |
| Power losses | < 0.5 W/kVAr |
| Capacitor tolerance | -5 % to 10 % |
| Voltage testing | 2.15 x Un AC between terminals for 10 s; = 660 V - 6 kV AC between terminal and enclosure for 10 s |
| Inrush current | 250 x In |
| Max. switching operations per year | 7000 |
| Lifespan in hours | 130000 h |
| Dielectric material | Metallized polypropylene film with Zn/Al alloy, special resistance & profile, special edge (wave cut) |
| Impregnating material | Non-PCB dried PUR resin; Biodegradable |
| Installation type | Indoor installation |
| Connections - terminals | ClampTite terminal |
| Mounting mode | Upright/horizontal |
| Diameter | 116 mm |
| Height | 242 mm |
| Product weight | 2,5 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Product series | PowerLogic |
| Product or component type | Heavy-duty capacitor |
| Product name | PowerLogic PFC Capacitor |
| Network frequency | 50/60 Hz |
| Series name | Heavy Duty |
| Electrical parameters | 15 kvar 690 V 50 Hz; 18 kvar 690 V 60 Hz |
| Max. permissible voltage | 1.1 x Un (8 hours over 24 hours) |
| Continuous overload resistance | 1.8 x inch |
| Nominal voltage | 690 V AC 50/60 Hz |
| Mounting |
| Standards | IEC 60831-2; IEC 60831-1 |
| Degree of protection (IP) | IP20 |
| Operating altitude | 2.000 m |
| Temperature class | D |
| Operating ambient temperature | -25…55 °C |
| Relative humidity | 95 % |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 19,000 cm |
| VPE 1 width | 19,000 cm |
| VPE 1 length | 31,500 cm |
| Packaging weight (Lbs) | 3,042 kg |
| VPE 2 type | S06 |
| VPE 2 quantity | 15 |
| VPE 2 height | 75,000 cm |
| VPE 2 width | 60,000 cm |
| VPE 2 length | 80,000 cm |
| VPE 2 weight | 59,630 kg |
PowerLogic PFC capacitors are a reliable and flexible solution for power factor correction under demanding operating conditions. These capacitors are mainly used where there are higher voltage disturbances or where there are small non-linear loads. The current rating of the capacitors must be increased to handle the harmonic current load. This capacitor delivers a nominal output power of 15 kVar at 690V AC, 50 Hz. The fixing is ensured by a ClampTite clamp. This component complies with IEC 60831-1 and IEC 60831-2 standards. The weight of the product in the housing is 2.5 kg.