| Complementary |
| Maximum mechanical speed | 3000 rpm |
| [Us] rated supply voltage | 220 V |
| Network number of phases | Three phase; Single phase |
| Continuous stall current | 6.18 A |
| Continuous stall torque | 7.16 N.m for LXM28 at 7 A, 220 V, single phase; 7.16 N.m for LXM28 at 7 A, 220 V, three phase |
| Continuous power | 1500 W |
| Peak stall torque | 21.48 N.m for LXM28... at 7 A, 220 V, single phase; 21.48 N.m for LXM28... at 7 A, 220 V, three phase |
| Nominal output power | 1500 W for LXM28... at 7 A, 220 V, single phase; 1500 W for LXM28... at 7 A, 220 V, three phase |
| Nominal torque | 7.16 N.m for LXM28... at 7 A, 220 V, single phase; 7.16 N.m for LXM28... at 7 A, 220 V, three phase |
| Nominal speed | 2000 rpm for LXM28... at 7 A, 220 V, single phase; 2000 rpm for LXM28... at 7 A, 220 V, three phase |
| Maximum current Irms | 20.31 A for LXM28... at 1.5 kW, 220 V |
| Maximum permanent current | 6.74 A |
| Product compatibility | LXM28... servo drive motor at 1.5 kW, 220 V, single phase; LXM28... servo drive motor at 1.5 kW, 220 V, three phase |
| Shaft end | Smooth shaft |
| Shaft diameter | 22 mm |
| Shaft length | 55 mm |
| Feedback type | 20 bits single turn absolute encoder |
| Holding brake | Without |
| Mounting support | Asian standard flange |
| Motor flange size | 130 mm |
| Electrical connection | Connector MIL |
| Torque constant | 1.16 N.m/A at 20 °C |
| Back emf constant | 70 V/krpm at 20 °C |
| Number of motor poles | 5.0 |
| Rotor inertia | 9.7 kg.cm² |
| Stator resistance | 0.64 Ohm at 20 °C |
| Stator inductance | 6.4 mH at 20 °C |
| Stator electrical time constant | 10 ms at 20 °C |
| Maximum radial force Fr | 670 N at 2000 rpm |
| Maximum axial force Fa | 200 N |
| Brake pull-in power | 19.7 W |
| Type of cooling | Natural convection |
| Length | 167 mm |
| Number of motor stacks | 3 |
| Centring collar diameter | 110 mm |
| Centring collar depth | 8 mm |
| Number of mounting holes | 4 |
| Mounting holes diameter | 9.2 mm |
| Circle diameter of the mounting holes | 145 mm |
| Distance shaft shoulder-flange | 8 mm |
| Net weight | 7.6 kg |
| Sizing reference | BCH2 |
| Accuracy error [angular] | 0.044 ° |
| Temperature copper hot | 135 °C |
| Temperature magnet hot | 100 °C |
| Temperature magnet rt | 20 °C |
| Inertia | 0.0 kg.cm² of brake; 9.69 kg.cm² of motor |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP50 IM V3; IP65 IM B5, IM V1 |
| Ambient air temperature for operation | -20…40 °C |
| Logistical informations |
| Country of origin | CN |
| Main |
| Range of product | Lexium 28 |
| Range compatibility | Lexium 28 |
| Product or component type | Servo motor |
| Device short name | BCH2 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 18.1 cm |
| Package 1 Width | 23.0 cm |
| Package 1 Length | 36.0 cm |
| Package 1 Weight | 8.55 kg |
BCH2 servo motor from the Lexium 28 servo drive series. The BCH2 series includes brushless synchronous AC servo motors with compact dimensions for dynamic applications. This servo has a nominal continuous stall torque of 7.16 Nm. Its winding type is optimized for the torque at 2000 rpm and has a medium moment of inertia. The nominal power is 1500 W. The electrical connection is made via MIL connector. The motor flange is 130 mm for fastening. A high-resolution 20-bit absolute encoder as a single turn enables precise control. The shaft end is smooth and designed in accordance with protection class IP65. The motor housing corresponds to protection class IP65. There is no holding brake. The associated servo amplifier from the Lexium 28 series is intended for operation: LXM28.U20M3X. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.