Schneider Electric BCH2MM0813CA6C, EAN: 3606480733949

Schneider Electric BCH2MM0813CA6C servo motor 850 W with oil seal

Schneider Electric BCH2MM0813CA6C servo motor 850 W with oil seal

Lieske Part No. 1862559
Mfg Part No BCH2MM0813CA6C
EAN-Code 3606480733949
Manufacturer Schneider Electric
Here only 853,00 EUR
1.015,07 EUR incl. VAT

Further information for Schneider Electric BCH2MM0813CA6C servo motor 850 W with oil seal

Complementary
Maximum mechanical speed3000 rpm
[Us] rated supply voltage220 V
Network number of phasesSingle phase; Three phase
Continuous stall current5.62 A
Continuous stall torque5.39 N.m for LXM26D at 7 A, 220 V, single phase; 5.39 N.m for LXM26D at 7 A, 220 V, three phase; 5.39 N.m for LXM28 at 7 A, 220 V, single phase; 5.39 N.m for LXM28 at 7 A, 220 V, three phase
Continuous power850 W
Peak stall torque13.8 N.m for LXM26D at 7 A, 220 V, single phase; 13.8 N.m for LXM26D at 7 A, 220 V, three phase; 13.8 N.m for LXM28... at 7 A, 220 V, single phase; 13.8 N.m for LXM28... at 7 A, 220 V, three phase
Nominal output power850 W for LXM26D at 7 A, 220 V, single phase; 850 W for LXM26D at 7 A, 220 V, three phase; 850 W for LXM28... at 7 A, 220 V, single phase; 850 W for LXM28... at 7 A, 220 V, three phase
Nominal torque5.39 N.m for LXM26D at 7 A, 220 V, single phase; 5.39 N.m for LXM26D at 7 A, 220 V, three phase; 5.39 N.m for LXM28... at 7 A, 220 V, single phase; 5.39 N.m for LXM28... at 7 A, 220 V, three phase
Nominal speed1500 rpm for LXM26D at 7 A, 220 V, single phase; 1500 rpm for LXM26D at 7 A, 220 V, three phase; 1500 rpm for LXM28... at 7 A, 220 V, single phase; 1500 rpm for LXM28... at 7 A, 220 V, three phase
Maximum current Irms14.96 A for LXM28... at 0.85 kW, 220 V
Maximum permanent current6.29 A
Product compatibilityLXM26D servo drive motor at 0.85 kW, 220 V, single phase; LXM26D servo drive motor at 0.85 kW, 220 V, three phase; LXM28... servo drive motor at 0.85 kW, 220 V, single phase; LXM28... servo drive motor at 0.85 kW, 220 V, three phase
Shaft endKeyed
Shaft diameter19 mm
Shaft length48 mm
Key width6 mm
Feedback type20 bits single turn absolute encoder
Holding brakeWithout
Mounting supportAsian standard flange
Motor flange size130 mm
Electrical connectionConnector MIL
Torque constant0.96 N.m/A at 20 °C
Back emf constant58 V/krpm at 20 °C
Number of motor poles5.0
Rotor inertia13.5 kg.cm²
Stator resistance0.34 Ohm at 20 °C
Stator inductance4.3 mH at 20 °C
Stator electrical time constant13.24 ms at 20 °C
Maximum radial force Fr670 N at 1500 rpm
Maximum axial force Fa200 N
Brake pull-in power19.7 W
Type of coolingNatural convection
Length187 mm
Number of motor stacks4
Centring collar diameter110 mm
Centring collar depth8 mm
Number of mounting holes4
Mounting holes diameter9.2 mm
Circle diameter of the mounting holes145 mm
Distance shaft shoulder-flange8 mm
Net weight9.6 kg
Sizing referenceBCH2
Accuracy error [angular]0.044 °
Temperature copper hot135 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Inertia0.0 kg.cm² of brake; 13.49 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP50 IM V3; IP65 IM B5, IM V1
Ambient air temperature for operation-20…40 °C
Logistical informations
Country of originCN
Main
Range of productLexium 28
Range compatibilityLexium 28
Product or component typeServo motor
Device short nameBCH2
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height18.1 cm
Package 1 Width23 cm
Package 1 Length36 cm
Package 1 Weight19970 g
BCH2 servo motor from the Lexium 28 servo drive series. The BCH2 series includes brushless synchronous AC servo motors with compact dimensions for dynamic applications. This servo has a nominal continuous stall torque of 5.39 Nm. Its winding type is optimized for torque at 1500 rpm and has a medium moment of inertia. The nominal power is 800 W. The electrical connection is made via MIL connector. The motor flange is 130 mm for fastening. A high-resolution 20-bit absolute encoder as a single-turn enables precise control. The shaft end is designed for a feather key and is designed to comply with protection class IP65. The motor housing complies with protection class IP65. There is no holding brake. The associated servo amplifier from the Lexium 28 series is intended for operation: LXM28.U20M3X. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1862559
qrcode für Schneider Electric BCH2MM0813CA6C servo motor 850 W with oil seal