Schneider Electric BCH2MM0613CA6C, EAN: 3606480734588

Schneider Electric BCH2MM0613CA6C servo motor 600 W with oil seal

Schneider Electric BCH2MM0613CA6C servo motor 600 W with oil seal

Lieske Part No. 1770848
Mfg Part No BCH2MM0613CA6C
EAN-Code 3606480734588
Manufacturer Schneider Electric
Here only 813,51 EUR
968,08 EUR incl. VAT

Further information for Schneider Electric BCH2MM0613CA6C servo motor 600 W with oil seal

Complementary
Maximum mechanical speed3000 rpm
[Us] rated supply voltage220 V; 110 V
Network number of phasesThree phase; Single phase
Continuous stall current3.77 A
Continuous stall torque5.73 N.m for LXM26D at 4.5 A, 220 V, single phase; 5.73 N.m for LXM26D at 4.5 A, 220 V, three phase; 5.73 N.m for LXM28 at 4.5 A, 220 V, single phase; 5.73 N.m for LXM28 at 4.5 A, 220 V, three phase; 5.73 N.m for LXM28 at 9 A, 110 V, single phase
Continuous power600 W
Peak stall torque17.19 N.m for LXM26D at 4.5 A, 220 V, single phase; 17.19 N.m for LXM26D at 4.5 A, 220 V, three phase; 17.19 N.m for LXM28... at 4.5 A, 220 V, single phase; 17.19 N.m for LXM28... at 4.5 A, 220 V, three phase; 17.19 N.m for LXM28... at 9 A, 110 V, single phase
Nominal output power600 W for LXM26D at 4.5 A, 220 V, single phase; 600 W for LXM26D at 4.5 A, 220 V, three phase; 600 W for LXM28... at 4.5 A, 220 V, single phase; 600 W for LXM28... at 4.5 A, 220 V, three phase; 600 W for LXM28... at 9 A, 110 V, single phase
Nominal torque5.73 N.m for LXM26D at 4.5 A, 220 V, single phase; 5.73 N.m for LXM26D at 4.5 A, 220 V, three phase; 5.73 N.m for LXM28... at 4.5 A, 220 V, single phase; 5.73 N.m for LXM28... at 4.5 A, 220 V, three phase; 5.73 N.m for LXM28... at 9 A, 110 V, single phase
Nominal speed1000 rpm for LXM26D at 4.5 A, 220 V, single phase; 1000 rpm for LXM26D at 4.5 A, 220 V, three phase; 1000 rpm for LXM28... at 4.5 A, 220 V, single phase; 1000 rpm for LXM28... at 4.5 A, 220 V, three phase; 1000 rpm for LXM28... at 9 A, 110 V, single phase
Maximum current Irms13.44 A for LXM28... at 0.6 kW, 220 V; 13.44 A for LXM28... at 0.6 kW, 110 V
Maximum permanent current4.1 A
Product compatibilityLXM26D servo drive motor at 0.6 kW, 220 V, single phase; LXM26D servo drive motor at 0.6 kW, 220 V, three phase; LXM28... servo drive motor at 0.6 kW, 220 V, single phase; LXM28... servo drive motor at 0.6 kW, 220 V, three phase; LXM28... servo drive motor at 0.6 kW, 110 V, single phase
Shaft endKeyed
Shaft diameter22 mm
Shaft length45 mm
Key width8 mm
Feedback type20 bits single turn absolute encoder
Holding brakeWithout
Mounting supportAsian standard flange
Motor flange size130 mm
Electrical connectionConnector MIL
Torque constant1.52 N.m/A at 20 °C
Back emf constant92 V/krpm at 20 °C
Number of motor poles5.0
Rotor inertia6.63 kg.cm²
Stator resistance1.93 Ohm at 20 °C
Stator inductance23.91 mH at 20 °C
Stator electrical time constant12.9 ms at 20 °C
Maximum radial force Fr670 N at 1000 rpm
Maximum axial force Fa200 N
Brake pull-in power19.7 W
Type of coolingNatural convection
Length147 mm
Number of motor stacks1
Centring collar diameter110 mm
Centring collar depth8 mm
Number of mounting holes4
Mounting holes diameter9.2 mm
Circle diameter of the mounting holes145 mm
Distance shaft shoulder-flange8 mm
Net weight7 kg
Sizing referenceBCH2
Accuracy error [angular]0.044 °
Temperature copper hot135 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Inertia0.0 kg.cm² of brake; 6.62 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP50 IM V3; IP65 IM B5, IM V1
Ambient air temperature for operation-20…40 °C
Main
Range of productLexium 28
Range compatibilityLexium 28
Product or component typeServo motor
Device short nameBCH2
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height30.000 cm
Package 1 Width30.000 cm
Package 1 Length40.000 cm
Package 1 Weight8.296 kg
BCH2 servo motor from the Lexium 28 servo drive series. The BCH2 series includes brushless synchronous AC servo motors with compact dimensions for dynamic applications. This servo has a nominal continuous stall torque of 5.73 Nm. Its winding type is optimized for the torque at 1000 rpm and has a medium moment of inertia. The nominal power is 600 W. The electrical connection is made via MIL connector. The motor flange is 130 mm for fastening. A high-resolution 20-bit absolute encoder as a single-turn enables precise control. The shaft end is designed for a feather key and complies with protection class IP65. The motor housing corresponds to protection class IP65. There is no holding brake. The associated servo amplifier from the Lexium 28 series is intended for operation: LXM28.U20M3X. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1770848
qrcode für Schneider Electric BCH2MM0613CA6C servo motor 600 W with oil seal