Schneider Electric BCH2LF0733CF5C, EAN: 3606480733871

Schneider Electric BCH2LF0733CF5C servo motor 80 750 W with oil seal

Schneider Electric BCH2LF0733CF5C servo motor 80 750 W with oil seal

Lieske Part No. 1770547
Mfg Part No BCH2LF0733CF5C
EAN-Code 3606480733871
Manufacturer Schneider Electric
Here only 1.233,11 EUR
1.467,40 EUR incl. VAT

Further information for Schneider Electric BCH2LF0733CF5C servo motor 80 750 W with oil seal

Complementary
Maximum mechanical speed5000 rpm
[Us] rated supply voltage220 V; 110 V
Network number of phasesSingle phase; Three phase
Continuous stall current4.01 A
Continuous stall torque2.39 N.m for LXM26D at 4.5 A, 220 V, single phase; 2.39 N.m for LXM26D at 4.5 A, 220 V, three phase; 2.39 N.m for LXM28 at 4.5 A, 220 V, single phase; 2.39 N.m for LXM28 at 4.5 A, 220 V, three phase; 2.39 N.m for LXM28 at 9 A, 110 V, single phase
Continuous power750 W
Peak stall torque7.16 N.m for LXM26D at 4.5 A, 220 V, single phase; 7.16 N.m for LXM26D at 4.5 A, 220 V, three phase; 7.16 N.m for LXM28... at 4.5 A, 220 V, single phase; 7.16 N.m for LXM28... at 4.5 A, 220 V, three phase; 7.16 N.m for LXM28... at 9 A, 110 V, single phase
Nominal output power750 W for LXM26D at 4.5 A, 220 V, single phase; 750 W for LXM26D at 4.5 A, 220 V, three phase; 750 W for LXM28... at 4.5 A, 220 V, single phase; 750 W for LXM28... at 4.5 A, 220 V, three phase; 750 W for LXM28... at 9 A, 110 V, single phase
Nominal torque2.39 N.m for LXM26D at 4.5 A, 220 V, single phase; 2.39 N.m for LXM26D at 4.5 A, 220 V, three phase; 2.39 N.m for LXM28... at 4.5 A, 220 V, single phase; 2.39 N.m for LXM28... at 4.5 A, 220 V, three phase; 2.39 N.m for LXM28... at 9 A, 110 V, single phase
Nominal speed3000 rpm for LXM26D at 4.5 A, 220 V, single phase; 3000 rpm for LXM26D at 4.5 A, 220 V, three phase; 3000 rpm for LXM28... at 4.5 A, 220 V, single phase; 3000 rpm for LXM28... at 4.5 A, 220 V, three phase; 3000 rpm for LXM28... at 9 A, 110 V, single phase
Maximum current Irms13.23 A for LXM28... at 0.75 kW, 220 V; 13.23 A for LXM28... at 0.75 kW, 110 V
Maximum permanent current4.29 A
Product compatibilityLXM26D servo drive motor at 0.75 kW, 220 V, single phase; LXM26D servo drive motor at 0.75 kW, 220 V, three phase; LXM28... servo drive motor at 0.75 kW, 220 V, single phase; LXM28... servo drive motor at 0.75 kW, 220 V, three phase; LXM28... servo drive motor at 0.75 kW, 110 V, single phase
Shaft endKeyed
Shaft diameter19 mm
Shaft length35 mm
Key width6 mm
Feedback type20 bits single turn absolute encoder
Holding brakeWith
Holding torque2.5 N.m built-in
Mounting supportAsian standard flange
Motor flange size80 mm
Electrical connectionFree lead
Torque constant0.6 N.m/A at 20 °C
Back emf constant36 V/krpm at 20 °C
Number of motor poles4.0
Rotor inertia1.24 kg.cm²
Stator resistance1.5 Ohm at 20 °C
Stator inductance6.1 mH at 20 °C
Stator electrical time constant4.07 ms at 20 °C
Maximum radial force Fr332 N at 3000 rpm
Maximum axial force Fa115 N
Brake pull-in power10.2 W
Type of coolingNatural convection
Length178 mm
Number of motor stacks2
Centring collar diameter70 mm
Centring collar depth4 mm
Number of mounting holes4
Mounting holes diameter6.6 mm
Circle diameter of the mounting holes90 mm
Distance shaft shoulder-flange4 mm
Net weight3.6 kg
Sizing referenceBCH2
Accuracy error [angular]0.044 °
Temperature copper hot135 °C
Temperature magnet hot100 °C
Temperature magnet rt20 °C
Inertia1.58 kg.cm² of brake; 1.24 kg.cm² of motor
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP50 IM V3; IP65 IM B5, IM V1
Ambient air temperature for operation0…40 °C
Logistical informations
Country of originCN
Main
Range of productLexium 28
Range compatibilityLexium 28
Product or component typeServo motor
Device short nameBCH2
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height14.000 cm
Package 1 Width17.500 cm
Package 1 Length29.500 cm
Package 1 Weight4.008 kg
Unit Type of Package 2S03
Number of Units in Package 22
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight8.520 kg
BCH2 servo motor from the Lexium 28 servo drive series. The BCH2 series includes brushless synchronous AC servo motors with compact dimensions for dynamic applications. This servo has a nominal continuous stall torque of 2.39 Nm. Its winding type is optimized for torque at 3000 rpm and has a low moment of inertia. The nominal power is 700 W. The electrical connection is made via free wires. The motor flange is 80 mm for mounting. A high-resolution 20-bit absolute encoder as a single turn enables precise control. The shaft end is designed for a feather key and conforms to protection class IP65. The motor housing corresponds to protection class IP65. A holding brake is integrated. The associated servo amplifier from the Lexium 28 series is intended for operation: LXM28.U20M3X. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1770547
qrcode für Schneider Electric BCH2LF0733CF5C servo motor 80 750 W with oil seal