Complementary
Maximum mechanical speed	5000 rpm
[Us] rated supply voltage	220 V; 110 V
Network number of phases	Single phase; Three phase
Continuous stall current	1.11 A
Continuous stall torque	0.64 N.m for LXM28 at 1.5 A, 220 V, single phase; 0.64 N.m for LXM28 at 1.5 A, 220 V, three phase; 0.64 N.m for LXM28 at 3.6 A, 110 V, single phase
Continuous power	200 W
Peak stall torque	1.92 N.m for LXM28... at 1.5 A, 220 V, single phase; 1.92 N.m for LXM28... at 1.5 A, 220 V, three phase; 1.92 N.m for LXM28... at 3.6 A, 110 V, single phase
Nominal output power	200 W for LXM28... at 1.5 A, 220 V, single phase; 200 W for LXM28... at 1.5 A, 220 V, three phase; 200 W for LXM28... at 3.6 A, 110 V, single phase
Nominal torque	0.64 N.m for LXM28... at 1.5 A, 220 V, single phase; 0.64 N.m for LXM28... at 1.5 A, 220 V, three phase; 0.64 N.m for LXM28... at 3.6 A, 110 V, single phase
Nominal speed	3000 rpm for LXM28... at 1.5 A, 220 V, single phase; 3000 rpm for LXM28... at 1.5 A, 220 V, three phase; 3000 rpm for LXM28... at 3.6 A, 110 V, single phase
Maximum current Irms	4.31 A for LXM28... at 0.2 kW, 220 V; 4.31 A for LXM28... at 0.2 kW, 110 V
Maximum permanent current	1.3 A
Product compatibility	LXM28... servo drive motor at 0.2 kW, 220 V, single phase; LXM28... servo drive motor at 0.2 kW, 220 V, three phase; LXM28... servo drive motor at 0.2 kW, 110 V, single phase
Shaft end	Smooth shaft
Shaft diameter	14 mm
Shaft length	30 mm
Feedback type	20 bits single turn absolute encoder
Holding brake	Without
Mounting support	Asian standard flange
Motor flange size	60 mm
Electrical connection	Free lead
Torque constant	0.58 N.m/A at 20 °C
Back emf constant	35 V/krpm at 20 °C
Number of motor poles	4.0
Rotor inertia	0.16 kg.cm²
Stator resistance	12.2 Ohm at 20 °C
Stator inductance	22.68 mH at 20 °C
Stator electrical time constant	1.84 ms at 20 °C
Maximum radial force Fr	200 N at 3000 rpm
Maximum axial force Fa	70 N
Brake pull-in power	11.2 W
Type of cooling	Natural convection
Length	104 mm
Number of motor stacks	1
Centring collar diameter	50 mm
Centring collar depth	5.5 mm
Number of mounting holes	4
Mounting holes diameter	5.5 mm
Circle diameter of the mounting holes	70 mm
Distance shaft shoulder-flange	5.5 mm
Net weight	1.02 kg
Sizing reference	BCH2
Accuracy error [angular]	0.044 °
Temperature copper hot	135 °C
Temperature magnet hot	100 °C
Temperature magnet rt	20 °C
Inertia	0.0 kg.cm² of brake; 0.15 kg.cm² of motor
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP50 IM V3; IP65 IM B5, IM V1
Ambient air temperature for operation	-20…40 °C
Main
Range of product	Lexium 28
Range compatibility	Lexium 28
Product or component type	Servo motor
Device short name	BCH2
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	11.1 cm
Package 1 Width	14.5 cm
Package 1 Length	26.5 cm
Package 1 Weight	1.67 kg

BCH2 servo motor from the Lexium 28 servo drive series. The BCH2 series includes brushless synchronous AC servo motors with compact dimensions for dynamic applications. This servo has a nominal continuous stall torque of 0.64 Nm. Its winding type is optimized for torque at 3000 rpm and has a low moment of inertia. The nominal power is 200 W. The electrical connection is made via free wires. The motor flange is 60 mm for fastening. A high-resolution 20-bit absolute encoder as a single turn enables precise control. The shaft end is smooth and designed in accordance with protection class IP65. The motor housing corresponds to protection class IP65. There is no holding brake. The associated servo amplifier from the Lexium 28 series is intended for operation: LXM28.U20M3X. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.