Schneider Electric ATV340U55N4, EAN: 3606480966927

Schneider Electric ATV340U55N4 frequency converter

Industrial Material > Automation > Frequency converter, soft starter

Schneider Electric ATV340U55N4 frequency converter

Lieske Part No. 1859836
Mfg Part No ATV340U55N4
EAN-Code 3606480966927
Manufacturer Schneider Electric
Here only 1.693,85 EUR
2.015,68 EUR incl. VAT

Further information for Schneider Electric ATV340U55N4 frequency converter

Complementary
Discrete input number5
Discrete input typePTI programmable as pulse input: 0…30 kHz, 24 V DC (30 V); DI1...DI5 safe torque off, 24 V DC (30 V), impedance: 3.5 kOhm; programmable
number of preset speeds16 preset speeds
Discrete output number2.0
Discrete output typeProgrammable output DQ1, DQ2 30 V DC 100 mA
Analogue input number2
Analogue input typeAI1 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits; AI1 software-configurable temperature probe or water level sensor; AI1 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits; AI2 software-configurable voltage: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Analogue output number1
Analogue output typeSoftware-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits; Software-configurable current AQ1: 0...20 mA impedance 500 Ohm, resolution 10 bits
Relay output number2
Relay output typeRelay outputs R1A; Relay outputs R1C electrical durability 100000 cycles; Relay outputs R2A; Relay outputs R2C electrical durability 100000 cycles
Minimum switching currentRelay output R1B: 5 mA at 24 V DC; Relay output R2C: 5 mA at 24 V DC
Physical interface2-wire RS 485
Connector type1 RJ45
Method of accessSlave Modbus RTU
Transmission rate4.8 kbit/s; 9.6 kbit/s; 19.2 kbit/s; 38.4 kbit/s
Transmission frameRTU
Number of addresses1…247
Data format8 bits, configurable odd, even or no parity
Type of polarizationNo impedance
4 quadrant operation possibleTrue
Asynchronous motor control profileVariable torque standard; Optimized torque mode; Constant torque standard
Synchronous motor control profilePermanent magnet motor; Reluctance motor
Pollution degree2 conforming to IEC 61800-5-1
Maximum output frequency0.599 kHz
Acceleration and deceleration rampsLinear adjustable separately from 0.01...9999 s; S, U or customized
Motor slip compensationAdjustable; Automatic whatever the load; Can be suppressed; Not available in permanent magnet motor law
Switching frequency2...16 kHz adjustable; 7...16 kHz with derating factor
Nominal switching frequency4 kHz
Braking to standstillBy DC injection
Brake chopper integratedTrue
Line current15.3 A at 380 V (normal duty); 12.2 A at 480 V (normal duty); 20.0 A at 380 V (heavy duty); 16.0 A at 480 V (heavy duty)
Maximum input current20.0 A
Maximum output voltage480 V
Apparent power12.1 kVA at 480 V (normal duty); 13.3 kVA at 480 V (heavy duty)
Maximum transient current18.2 A during 60 s (normal duty); 19.1 A during 60 s (heavy duty); 22.3 A during 2 s (normal duty); 22.9 A during 2 s (heavy duty)
Electrical connectionScrew terminal, clamping capacity: 4...6 mm² for DC bus; Screw terminal, clamping capacity: 0.2...2.5 mm² for control; Screw terminal, clamping capacity: 1.5...6 mm² for line side; Screw terminal, clamping capacity: 1.5...6 mm² for motor
Prospective line Isc22 kA
Base load current at high overload12.7 A
Base load current at low overload16.5 A
Power dissipation in WNatural convection: 134 W at 380 V, switching frequency 4 kHz (heavy duty); Forced convection: 134 W at 380 V, switching frequency 4 kHz (heavy duty); Natural convection: 164 W at 380 V, switching frequency 4 kHz (normal duty); Forced convection: 164 W at 380 V, switching frequency 4 kHz (normal duty)
With safety function Safely Limited Speed (SLS)True
With safety function Safe brake management (SBC/SBT)True
With safety function Safe Operating Stop (SOS)False
With safety function Safe Position (SP)False
With safety function Safe programmable logicFalse
With safety function Safe Speed Monitor (SSM)False
With safety function Safe Stop 1 (SS1)True
With sft fct Safe Stop 2 (SS2)False
With safety function Safe torque off (STO)True
With safety function Safely Limited Position (SLP)False
With safety function Safe Direction (SDI)False
Width110.0 mm
Height270.0 mm
Depth234.0 mm
Net weight2.9 kg
Continuous output current16.5 A at 4 kHz for normal duty; 12.7 A at 4 kHz for heavy duty
Contractual warranty
Warranty (in months)18
Environment
Operating positionVertical +/- 10 degree
Product certificationsUL; CSA; TÜV; EAC; CTick
MarkingCE
StandardsIEC 61800-3; IEC 61800-5-1; IEC 60721-3; IEC 61508; IEC 13849-1; UL 618000-5-1; UL 508C
Assembly styleWith heat sink
Electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3; Class 3S3 according to IEC 60721-3-3
Maximum acceleration under shock impact (during operation)70 m/s² at 22 ms
Maximum acceleration under vibrational stress (during operation)5 m/s² at 9...200 Hz
Maximum deflection under vibratory load (during operation)1.5 mm at 2...9 Hz
Permitted relative humidity (during operation)Class 3K5 according to EN 60721-3
Volume of cooling air76.0 m3/h
Type of coolingForced convection
Overvoltage categoryClass III
Regulation loopAdjustable PID regulator
Noise level46.6 dB
Ambient air transport temperature-40…70 °C
Ambient air temperature for operation-15…50 °C without derating (vertical position); 50…60 °C with derating factor (vertical position)
Ambient air temperature for storage-40…70 °C
IsolationBetween power and control terminals
Logistical informations
Country of originID
Main
Range of productAltivar Machine ATV340
Product or component typeVariable speed drive
Product specific applicationMachine
Mounting modeCabinet mount
VariantStandard version
Communication port protocolModbus serial
Option cardCommunication module, Profibus DP V1; Communication module, PROFINET; Communication module, DeviceNet; Communication module, CANopen; Communication module, EtherCAT
Network number of phases3 phases
Supply frequency50...60 Hz +/- 5 %
[Us] rated supply voltage380...480 V - 15...10 %
nominal output current12.7 A
Motor power kW7.5 kW for normal duty; 5.5 kW for heavy duty
Motor power hp10 hp for normal duty; 7 hp for heavy duty
EMC filterClass C3 EMC filter integrated
IP degree of protectionIP20
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height13.000 cm
Package 1 Width37.000 cm
Package 1 Length31.500 cm
Package 1 Weight3.720 kg
Unit Type of Package 2P06
Number of Units in Package 210
Package 2 Height75.000 cm
Package 2 Width60.000 cm
Package 2 Length80.000 cm
Package 2 Weight50.200 kg
Frequency converter ATV340, IP20, IO version. Dimensions 110 x 270 x 217 mm, power KW 5.5, MTZ CE. Modular.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1859836
qrcode für Schneider Electric ATV340U55N4 frequency converter