Additional features
Number of discrete inputs	5
Discrete input type	PTI Safe Torque Off (safely shut-off torque): 0…30 kHz, 24 V DC (30 V); DI1 - DI5 Digital input, 24 V DC (30 V), impedance: 3.5 kOhm
Number of preset speeds	16 preset speeds
Number of discrete outputs	2,0
Discrete output type	Programmable output DQ1, DQ2 30 V DC 100 mA
Number of analog inputs	2
Analogue input type	AI1 software-configurable current: 0 - 20 mA, impedance: 250 Ohm, resolution 12 bits; AI1 software-configurable temperature sensor or water level sensor; AI1 software-configurable voltage: 0 - 10 V DC, impedance: 31.5 kOhm, resolution 12 bits; AI2 software-configurable voltage: -10 - 10 V DC, impedance: 31.5 kOhm, resolution 12 bits
Number of analogue outputs	1
Analog output type	Software-configurable voltage AQ1: 0 - 10 V DC resistance 470 Ohm, resolution 10 bit; Software-configurable current AQ1: 0 - 20 mA resistance 500 Ohm, resolution 10 bit
Relay output number	2
Output voltage	= supply voltage
Relay output type	Relay outputs R1A; relay outputs R1C electrical life 100000 cycles; relay outputs R2A; relay outputs R2C electrical life 100000 cycles
Min. switching current	Relay output R1B: 5 mA at 24 V DC; Relay output R2C: 5 mA at 24 V DC
Physical interface	2-wire RS 485
Connection type	3 RJ45
Access method	Slave Modbus RTU
Transmission speed	4.8 Kbit/s; 9.6 Kbit/s; 19.2 Kbit/s; 38.4 Kbit/s
Transmission frame	RTU
Number of addresses	1…247
Data format	8 bits, configurable to odd, even or no parity
Polarisation type	No impedance
4-quadrant operation possible	Correct
Control profile for asynchronous motors	Variable standard torque; Constant standard torque; Optimized torque mode
Control profile for synchronous motors	Permanent magnet motor; Reluctance motor
Pollution degree	2 corresponds to IEC 61800-5-1
Max. output frequency	0.599 kHz
Acceleration and deceleration ramps	Linearly separately adjustable from 0.01 - 9999 s; S, U or user-defined
Motor slip compensation	Adjustable; deactivatable; automatic, independent of load; not available in permanent magnet motor control
Clock frequency	2 - 16 kHz adjustable; 6 - 16 kHz with power derating factor
Rated switching frequency	4 kHz
Braking to standstill	By direct current injection
Integrated brake chopper	Correct
Mains power	60.1 A at 380 V (normal operation); 48.6 A at 480 V (normal operation); 63.5 A at 380 V (heavy-duty operation); 50.6 A at 480 V (heavy-duty operation)
Max. input current	63,5 A
Max. output voltage	480 V
Apparent power	45.1 kVA at 480 V (normal operation); 42.1 kVA at 480 V (heavy-duty operation)
Max. peak current	68.2 A for 60 s (normal operation); 69 A for 60 s (heavy-duty operation); 83.7 A for 2 s (normal operation); 83 A for 2 s (heavy-duty operation)
Electrical connection	Screw terminal, terminal capacity: 0.2 - 2.5 mm² for control; Screw terminal, terminal capacity: 6 - 25 mm² for motor; Screw terminal, terminal capacity: 10-25 mm² for line side; Screw terminal, terminal capacity: 10-25 mm² for DC bus
Potential line Isc	22 kA
Base load current at high overload	46,0 A
Base load current at low overload	62,0 A
Power loss in W	Natural convection: 28 W at 380 V, switching frequency 4 kHz (heavy-duty operation); Forced convection: 486 W at 380 V, switching frequency 4 kHz (heavy-duty operation); Natural convection: 39 W at 380 V, switching frequency 4 kHz (normal operation); Forced convection: 631 W at 380 V, switching frequency 4 kHz (normal operation)
With safety function Safely Limited Speed (SLS)	Correct
With safety function Safe brake management (SBC/SBT)	Correct
With safety function Safe Operating Stop (SOS)	False
With safety function Safe Position (SP)	False
With safety function Safe programmable logic	False
With safety function Safe Speed Monitor (SSM)	False
With safety function Safe Stop 1 (SS1)	Correct
With safety function Safe Stop 2 (SS2)	False
With safety function Safe torque off (STO)	Correct
with safety function Safely Limited Position (SLP)	False
With safety function Safe Direction (SDI)	False
Width	180,0 mm
Height	385,0 mm
Depth	249,0 mm
Product weight	10,2 kg
Continuous output current	62 A at 4 kHz for normal operation; 46 A at 4 kHz for heavy-duty operation
Contractual warranty
Warranty (in months)	18
Main features
Product series	Altivar Machine ATV340
Product or component type	Variable speed drive
Product-specific application	Machine
Mounting mode	Mounting in control cabinet
Variant	Standard version
Communications protocol	Sercos; Modbus, serial
Number of power phases	3 phases
Supply frequency	50 - 60 Hz +/-5 %
[UH,nom] Rated operating voltage	380 - 480 V -15 - +10 %
Rated output current	46,0 A
Motor power (kW)	30 kW for normal operation; 22 kW for heavy-duty operation
Motor power (HP)	40 hp for normal operation; 30 hp for heavy-duty operation
EMC filter	Class C3 EMC filter integrated
Degree of protection (IP)	IP20
Mounting
Operating position	Vertical +/- 10 degrees
Product certifications	UL; CSA; TÜV; EAC; CTick
Text	CE
Standards	IEC 61800-3; IEC 61800-5-1; IEC 60721-3; IEC 61508; IEC 13849-1; UL 618000-5-1; UL 508C
Construction type	With heatsink
Electromagnetic compatibility	Electrostatic discharge immunity test Level 3 according to IEC 61000-4-2; Immunity test against radiated high-frequency electromagnetic fields Level 3 according to IEC 61000-4-3; Electrical fast transient burst immunity test Level 4 according to IEC 61000-4-4; 1.2/50 μs - 8/20 μs surge immunity test Level 3 according to IEC 61000-4-5; Conducted radio-frequency electromagnetic field immunity test Level 3 according to IEC 61000-4-6
Environmental class (during operation)	Class 3C3 according to IEC 60721-3-3; Class 3S3 according to IEC 60721-3-3
Maximum acceleration under shock (during operation)	70 m/s² at 22 ms
Max. acceleration under vibration load (during operation)	5 m/s² at 9...200 Hz
Max. deflection under vibration load (during operation)	1.5 mm at 2...9 Hz
Permissible relative humidity (during operation)	Class 3K5 according to EN 60721-3
Cooling air volume	128,0 m3/h
Cooling type	forced convection
Over voltage category	Class III
Control loop	Adjustable PID controller
Noise level	56,7 dB
Ambient air temperature during transport	-40…70 °C
Operating ambient temperature	-15…50 °C without power derating (vertical position); 50…60 °C with derating factor (vertical position)
Ambient temperature during storage	-25…70 °C
Insulation	between power and control terminals
Packaging units
VPE 1 type	PCE
Number of devices per package	1
VPE 1 height	33,7 cm
VPE 1 width	29,8 cm
VPE 1 length	54,8 cm
Packaging weight (Lbs)	11,89 kg

Altivar Machine ATV340. a frequency converter for machine manufacturers (OEMs) who implement high-performance applications for three-phase motors with or without encoder from 0.75 to 75 kW (1 to 100 HP). Power supply 400V 3-phase, power 22 kW (30 HP), communication interface Sercos, IP 20.