| Complementary |
| Discrete input number | 7 |
| Discrete input type | STO safe torque off, 24 V DC, impedance: 1.5 kOhm; DI1...DI6 logic inputs, 24 V DC (30 V); DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V) |
| Discrete input logic | Positive logic (source); Negative logic (sink) |
| Discrete output number | 3 |
| Discrete output type | Open collector DQ+ 0…1 kHz 30 V DC 100 mA; Open collector DQ- 0…1 kHz 30 V DC 100 mA |
| Analogue input number | 3 |
| Analogue input type | AI1 voltage: 0...10 V DC, impedance: 30 kOhm, resolution 10 bits; AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bits; AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
| Analogue output number | 1 |
| Analogue output type | Software-configurable current AQ1: 0...20 mA impedance 800 Ohm, resolution 10 bits; Software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Relay output type | Configurable relay logic R1A 1 NO electrical durability 100000 cycles; Configurable relay logic R1B 1 NC electrical durability 100000 cycles; Configurable relay logic R1C; Configurable relay logic R2A 1 NO electrical durability 100000 cycles; Configurable relay logic R2C |
| Maximum switching current | Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 250 V AC; Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 30 V DC; Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC; Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC; Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 250 V AC; Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 30 V DC |
| Minimum switching current | Relay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DC |
| Method of access | Slave CANopen |
| 4 quadrant operation possible | True |
| Asynchronous motor control profile | Voltage/frequency ratio, 5 points; Flux vector control without sensor, standard; Voltage/frequency ratio - Energy Saving, quadratic U/f; Flux vector control without sensor - Energy Saving; Voltage/frequency ratio, 2 points |
| Synchronous motor control profile | Vector control without sensor |
| Maximum output frequency | 0.599 kHz |
| Acceleration and deceleration ramps | Linear; U; S; CUS; Ramp switching; Acceleration/deceleration ramp adaptation; Acceleration/deceleration automatic stop with DC injection |
| Motor slip compensation | Automatic whatever the load; Adjustable 0...300 %; Not available in voltage/frequency ratio (2 or 5 points) |
| Switching frequency | 2...16 kHz adjustable; 4...16 kHz with derating factor |
| Nominal switching frequency | 4 kHz |
| Braking to standstill | By DC injection |
| Brake chopper integrated | True |
| Line current | 5.0 A at 380 V (heavy duty); 3.8 A at 500 V (heavy duty) |
| Maximum input current | 5.0 A |
| Maximum output voltage | 500 V |
| Apparent power | 3.3 kVA at 500 V (heavy duty) |
| Network frequency | 50...60 Hz |
| Relative symmetric network frequency tolerance | 5 % |
| Prospective line Isc | 5 kA |
| Base load current at high overload | 22.0 A |
| Power dissipation in W | Fan: 40 W at 380 V, switching frequency 4 kHz |
| With safety function Safely Limited Speed (SLS) | True |
| With safety function Safe brake management (SBC/SBT) | False |
| With safety function Safe Operating Stop (SOS) | False |
| With safety function Safe Position (SP) | False |
| With safety function Safe programmable logic | False |
| With safety function Safe Speed Monitor (SSM) | False |
| With safety function Safe Stop 1 (SS1) | True |
| With sft fct Safe Stop 2 (SS2) | False |
| With safety function Safe torque off (STO) | True |
| With safety function Safely Limited Position (SLP) | False |
| With safety function Safe Direction (SDI) | False |
| Protection type | Input phase breaks: drive; Overcurrent between output phases and earth: drive; Overheating protection: drive; Short-circuit between motor phases: drive; Thermal protection: drive |
| Width | 105.0 mm |
| Height | 142.0 mm |
| Depth | 158.0 mm |
| Net weight | 1.3 kg |
| Transient overtorque | 170…200 % of nominal motor torque |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Operating position | Vertical +/- 10 degree |
| Product certifications | CE; ATEX; NOM; GOST; EAC; RCM; KC |
| Marking | CE; ATEX; UL; CSA; EAC; RCM |
| Standards | IEC 61800-5-1 |
| Electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3 |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13...200 Hz |
| Maximum deflection under vibratory load (during operation) | 1.5 mm at 2...13 Hz |
| Permitted relative humidity (during operation) | Class 3K5 according to EN 60721-3 |
| Volume of cooling air | 18.0 m3/h |
| Overvoltage category | III |
| Regulation loop | Adjustable PID regulator |
| Speed accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| Pollution degree | 2 |
| Ambient air transport temperature | -25…70 °C |
| Ambient air temperature for operation | -10…50 °C without derating; 50…60 °C with derating factor |
| Ambient air temperature for storage | -25…70 °C |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Altivar Machine ATV320 |
| Product or component type | Variable speed drive |
| Product specific application | Complex machines |
| Variant | Standard version |
| Format of the drive | Compact |
| Mounting mode | Wall mount |
| Communication port protocol | Modbus serial; CANopen |
| Option card | Communication module, CANopen; Communication module, EtherCAT; Communication module, Profibus DP V1; Communication module, PROFINET; Communication module, Ethernet Powerlink; Communication module, EtherNet/IP; Communication module, DeviceNet |
| [Us] rated supply voltage | 380...500 V - 15...10 % |
| nominal output current | 3.0 A |
| Motor power kW | 1.1 kW for heavy duty |
| Motor power hp | 1.5 hp |
| EMC filter | Class C2 EMC filter integrated |
| IP degree of protection | IP20 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 17.800 cm |
| Package 1 Width | 18.600 cm |
| Package 1 Length | 19.000 cm |
| Package 1 Weight | 1.696 kg |
| Unit Type of Package 2 | P06 |
| Number of Units in Package 2 | 30 |
| Package 2 Height | 75.000 cm |
| Package 2 Width | 60.000 cm |
| Package 2 Length | 80.000 cm |
| Package 2 Weight | 63.940 kg |
The ATV320U11N4C frequency converter from Schneider Electric belongs to the Altivar Machine ATV320 series and is designed as a compact drive with variable speed for use in complex machines. It is rated for a nominal voltage of 380 to 500 V with 3-phase supply and supports voltage fluctuations of -15 % to +10 %. The rated power is 1.1 kW in heavy-duty operation, equivalent to a motor power of 1.5 hp. The converter features an integrated EMC filter of class C2, which can be optionally deactivated, and is suitable for operation on IT networks. The protection rating IP20 safeguards against access to moving parts and against solid foreign objects larger than 12.5 mm, but does not protect against splashing water or dust. Mounting is done in surface-mounted mode, with an EMC plate supplied for customer-side installation.
The ATV320U11N4C is intended for applications in industrial automation, particularly in complex machines where precise and flexible speed control is required. It is suitable for operating asynchronous and synchronous motors in open-loop mode, with sensorless vector control (SVC) ensuring high speed quality and stability. The integrated safety technology includes five functions: safe torque off (STO), safe stop 1 (SS1), safe limited speed (SLS), safe guard door interlock (GDL), and safe maximum speed (SMS), which are relevant for safety-critical applications.
The converter features 7 discrete inputs, including one STO input (24 V DC, impedance 1.5 kOhm) and six logic inputs (24 V DC, up to 30 V), with DI5 programmable as a pulse input (0–30 kHz). The logic of the inputs can be configured as positive (source) or negative (sink) logic. There are 3 discrete outputs of type Open Collector (0–1 kHz, 30 V DC, 100 mA). The analog inputs include three channels: AI1 for voltage (0–10 V DC, 30 kOhm, 10-bit resolution), AI2 for bipolar differential voltage (±10 V DC, 30 kOhm, 10-bit), and AI3 for current (0–20 mA, 250 Ohm, 10-bit, configurable). One analog output AQ1 is software-configurable for current (0–20 mA, 800 Ohm) or voltage (0–10 V DC, 470 Ohm), each with 10-bit resolution. The relay outputs (R1A, R1B, R1C, R2A, R2C) are configurable, with R1A/R1B/R1C switching up to 3 A at 250 V AC and R2A/R2C up to 5 A at 250 V AC. The minimum switching current is 5 mA at 24 V DC.
The converter enables 4-quadrant operation through an integrated braking module, eliminating the need for additional braking equipment. The maximum output frequency is 599 Hz. Control is achieved via various profiles: U/f characteristic (5-point, 2-point), U/f characteristic with energy-saving mode, quadratic U/f characteristic, and sensorless vector control (standard and energy-saving mode). Acceleration and deceleration ramps can be configured as linear, U-shaped, S-shaped, CUS-shaped, or via ramp switching. Motor slip compensation is available, but not with U/f characteristics with 2 or 5 points. Commissioning is done via Plug & Drive, with the converter pre-configured for common applications. Configurations can be loaded, edited, and secured using tools such as the commissioning software SoMove, decentralized terminals, or configuration tools Simple-Loader and Multi-Loader.
The ATV320U11N4C supports various communication protocols: Modbus serial and CANopen. Optional communication modules for EtherCAT, Profibus DP V1, Profinet, Ethernet Powerlink, EtherNet/IP, and DeviceNet can be retrofitted. Suitable accessories include line reactors (e.g. VW3-A4551), power contactors (e.g. LC1D09BL), braking resistors (e.g. VW3A7730), mechanical adapters (e.g. VW3A3600), and communication cards (e.g. VW3A3607 for Profibus DPv1, VW3A3627 for Profinet). These components enable functional expansion and adaptation to specific requirements.
Mounting is done in surface-mounted mode, with device dimensions including the EMC plate measuring 105 mm (width) × 188 mm (height) × 158 mm (depth). The EMC plate is intended for customer-side installation. The integrated safety technology and the wide range of input/output options require careful planning of cabling and control interfaces. Configuration is done via the integrated control interface or external tools.
The ATV320U11N4C offers high operational safety through integrated safety functions and flexible configurability. The integrated inputs and outputs allow direct connection to control systems. Support for various communication protocols and the possibility of expansion via option cards increase adaptability to different applications. Simple commissioning via Plug & Drive reduces installation time. The integrated EMC filtering ensures low electromagnetic emission, enabling operation in IT networks. Sensorless vector control ensures precise speed control, even under varying load conditions.