| Complementary |
| Discrete input number | 7 |
| Discrete input type | STO safe torque off, 24 V DC, impedance: 1.5 kOhm; DI1...DI6 logic inputs, 24 V DC (30 V); DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V) |
| Discrete input logic | Positive logic (source); Negative logic (sink) |
| Discrete output number | 3 |
| Discrete output type | Open collector DQ+ 0…1 kHz 30 V DC 100 mA; Open collector DQ- 0…1 kHz 30 V DC 100 mA |
| Analogue input number | 3 |
| Analogue input type | AI1 voltage: 0...10 V DC, impedance: 30 kOhm, resolution 10 bits; AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bits; AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
| Analogue output number | 1 |
| Analogue output type | Software-configurable current AQ1: 0...20 mA impedance 800 Ohm, resolution 10 bits; Software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Relay output type | Configurable relay logic R1A 1 NO electrical durability 100000 cycles; Configurable relay logic R1B 1 NC electrical durability 100000 cycles; Configurable relay logic R1C; Configurable relay logic R2A 1 NO electrical durability 100000 cycles; Configurable relay logic R2C |
| Maximum switching current | Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 250 V AC; Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 30 V DC; Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC; Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC; Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 250 V AC; Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 30 V DC |
| Minimum switching current | Relay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DC |
| Method of access | Slave CANopen |
| 4 quadrant operation possible | True |
| Asynchronous motor control profile | Voltage/frequency ratio, 5 points; Flux vector control without sensor, standard; Voltage/frequency ratio - Energy Saving, quadratic U/f; Flux vector control without sensor - Energy Saving; Voltage/frequency ratio, 2 points |
| Synchronous motor control profile | Vector control without sensor |
| Maximum output frequency | 0.599 kHz |
| Acceleration and deceleration ramps | Linear; U; S; CUS; Ramp switching; Acceleration/deceleration ramp adaptation; Acceleration/deceleration automatic stop with DC injection |
| Motor slip compensation | Automatic whatever the load; Adjustable 0...300 %; Not available in voltage/frequency ratio (2 or 5 points) |
| Switching frequency | 2...16 kHz adjustable; 4...16 kHz with derating factor |
| Nominal switching frequency | 4 kHz |
| Braking to standstill | By DC injection |
| Brake chopper integrated | True |
| Line current | 3.6 A at 380 V (heavy duty); 2.7 A at 500 V (heavy duty) |
| Maximum input current | 3.6 A |
| Maximum output voltage | 500 V |
| Apparent power | 2.3 kVA at 500 V (heavy duty) |
| Network frequency | 50...60 Hz |
| Relative symmetric network frequency tolerance | 5 % |
| Prospective line Isc | 5 kA |
| Base load current at high overload | 3.0 A |
| Power dissipation in W | Fan: 31 W at 380 V, switching frequency 4 kHz |
| With safety function Safely Limited Speed (SLS) | True |
| With safety function Safe brake management (SBC/SBT) | False |
| With safety function Safe Operating Stop (SOS) | False |
| With safety function Safe Position (SP) | False |
| With safety function Safe programmable logic | False |
| With safety function Safe Speed Monitor (SSM) | False |
| With safety function Safe Stop 1 (SS1) | True |
| With sft fct Safe Stop 2 (SS2) | False |
| With safety function Safe torque off (STO) | True |
| With safety function Safely Limited Position (SLP) | False |
| With safety function Safe Direction (SDI) | False |
| Protection type | Input phase breaks: drive; Overcurrent between output phases and earth: drive; Overheating protection: drive; Short-circuit between motor phases: drive; Thermal protection: drive |
| Width | 45.0 mm |
| Height | 325.0 mm |
| Depth | 245.0 mm |
| Net weight | 2.5 kg |
| Transient overtorque | 170…200 % of nominal motor torque |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Operating position | Vertical +/- 10 degree |
| Product certifications | CE; ATEX; NOM; GOST; EAC; RCM; KC |
| Marking | CE; ATEX; UL; CSA; EAC; RCM |
| Standards | IEC 61800-5-1 |
| Electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3 |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13...200 Hz |
| Maximum deflection under vibratory load (during operation) | 1.5 mm at 2...13 Hz |
| Permitted relative humidity (during operation) | Class 3K5 according to EN 60721-3 |
| Volume of cooling air | 9.4 m3/h |
| Overvoltage category | III |
| Regulation loop | Adjustable PID regulator |
| Speed accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| Pollution degree | 2 |
| Ambient air transport temperature | -25…70 °C |
| Ambient air temperature for operation | -10…50 °C without derating; 50…60 °C with derating factor |
| Ambient air temperature for storage | -25…70 °C |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Altivar Machine ATV320 |
| Product or component type | Variable speed drive |
| Product specific application | Complex machines |
| Variant | Standard version |
| Format of the drive | Book |
| Mounting mode | Cabinet mount |
| Communication port protocol | Modbus serial; CANopen |
| Option card | Communication module, CANopen; Communication module, EtherCAT; Communication module, Profibus DP V1; Communication module, PROFINET; Communication module, Ethernet Powerlink; Communication module, EtherNet/IP; Communication module, DeviceNet |
| [Us] rated supply voltage | 380...500 V - 15...10 % |
| nominal output current | 2.3 A |
| Motor power kW | 0.75 kW for heavy duty |
| Motor power hp | 1 hp |
| EMC filter | Class C2 EMC filter integrated |
| IP degree of protection | IP20 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.500 cm |
| Package 1 Width | 27.500 cm |
| Package 1 Length | 32.500 cm |
| Package 1 Weight | 2.346 kg |
| Unit Type of Package 2 | S06 |
| Number of Units in Package 2 | 24 |
| Package 2 Height | 75.000 cm |
| Package 2 Width | 60.000 cm |
| Package 2 Length | 80.000 cm |
| Package 2 Weight | 66.304 kg |
The ATV320U07N4B frequency converter from Schneider Electric belongs to the Altivar Machine ATV320 series and is designed as a variable speed drive for use in complex machines. The device is book-sized and intended for mounting in an enclosure. It features a rated operating voltage of 380 to 500 V, with allowable deviations of -15 % to +10 %. The nominal output power is 0.75 kW in heavy-duty operation, equivalent to 1 hp. The converter is designed for operation with 3-phase supply voltage and is suitable for applications in industrial automation systems.
The ATV320U07N4B is designed for use in complex machines and systems where precise and flexible speed control is required. It is particularly suitable for drives operated in open loop (open loop), both with asynchronous and synchronous motors. The integrated safety technology with functions such as safe torque off (STO), safe stop (SS1), safe limited speed (SLS), safe door holding (GDL), and safe maximum speed (SMS) makes it suitable for safety-critical applications. Support for 4-quadrant operation enables braking without additional components.
The device features 7 discrete inputs, with DI5 programmable as a pulse input up to 30 kHz. The inputs are rated for 24 V DC, with logic configurable as either positive (source) or negative (sink). There are 3 discrete outputs in open-collector format, capable of switching up to 100 mA at 30 V DC. The analog inputs include a voltage input (0–10 V DC), a bipolar differential voltage input (±10 V DC), and a current input (0–20 mA, configurable also as 4–20 mA). The analog output is software-configurable and can output current (0–20 mA) or voltage (0–10 V DC). An integrated braking module supports 4-quadrant operation.
The frequency converter offers various control profiles, including U/f characteristics (2- and 5-point), energy-saving mode, quadratic U/f characteristic, and sensorless vector control (SVC). The SVC control (sensorless vector control) ensures high speed quality and stability, especially under dynamic load conditions. The maximum output frequency is 599 Hz. Acceleration and deceleration ramps can be configured in various forms (linear, U, S, CUS), with options for automatic ramp adaptation and automatic stop with DC injection. Motor slip compensation is automatic and independent of load, with settings from 0 to 300 % possible — however, not available with U/f characteristics.
The converter supports multiple communication protocols, including Modbus serial and CANopen. Additionally, various communication modules are available, such as EtherCAT, Profibus DP V1, Profinet, Ethernet Powerlink, EtherNet/IP, and DeviceNet. These modules enable integration into various automation systems. Accessories include, for example, line chokes, contactors (LC1D09BL, LC1D09FE7, LC1D09P7, LC1D09B7, LC1D09E7, LC1D09BD, LC1D09F7, LC1D09V7, LC1D09ED), motor protection switches (GV2L08), braking resistors (VW3A7730), EMC filters (VW3A4422), and various option cards (e.g. VW3-A3607 for PROFIBUS DPv1, VW3A3627 for Profinet, VW3A3609 for DeviceNet, VW3A3608 for CANopen Daisy Chain, VW3A3616 for Ethernet TCP/IP, VW3A3618 for CANopen D-Sub9, VW3A3628 for CANopen KONN. LXM32).
The frequency converter is designed for mounting in an enclosure and is delivered with an EMC plate for customer-side mounting. The protection rating is IP20, meaning protection against touch with fingers and against solid foreign objects, but not against water or dust. The integrated EMC filter class C2 is activated by default but can be deactivated. Commissioning is done via Plug & Drive, with the device pre-configured for common applications. Configurations can be loaded, edited, and secured using tools such as the commissioning software SoMove, decentralized terminals, and configuration tools Simple-Loader and Multi-Loader.
The ATV320U07N4B offers intuitive operation and easy commissioning. The integrated safety technology meets requirements for safety-critical applications. The diverse control profiles and support for various communication protocols enable flexible integration into existing automation systems. The integrated EMC technology and braking module reduce the need for additional components. The maximum frequency of 599 Hz and the various ramp functions support dynamic drive requirements. Configuration options via various software tools simplify maintenance and adjustment of the device in operation.