| Complementary |
| Discrete input number | 7 |
| Discrete input type | STO safe torque off, 24 V DC, impedance: 1.5 kOhm; DI1...DI6 logic inputs, 24 V DC (30 V); DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V) |
| Discrete input logic | Positive logic (source); Negative logic (sink) |
| Discrete output number | 3 |
| Discrete output type | Open collector DQ+ 0…1 kHz 30 V DC 100 mA; Open collector DQ- 0…1 kHz 30 V DC 100 mA |
| Analogue input number | 3 |
| Analogue input type | AI1 voltage: 0...10 V DC, impedance: 30 kOhm, resolution 10 bits; AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bits; AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits |
| Analogue output number | 1 |
| Analogue output type | Software-configurable current AQ1: 0...20 mA impedance 800 Ohm, resolution 10 bits; Software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits |
| Relay output type | Configurable relay logic R1A 1 NO electrical durability 100000 cycles; Configurable relay logic R1B 1 NC electrical durability 100000 cycles; Configurable relay logic R1C; Configurable relay logic R2A 1 NO electrical durability 100000 cycles; Configurable relay logic R2C |
| Maximum switching current | Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 250 V AC; Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 30 V DC; Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC; Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC; Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 250 V AC; Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 30 V DC |
| Minimum switching current | Relay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DC |
| Method of access | Slave CANopen |
| 4 quadrant operation possible | True |
| Asynchronous motor control profile | Voltage/frequency ratio, 5 points; Flux vector control without sensor, standard; Voltage/frequency ratio - Energy Saving, quadratic U/f; Flux vector control without sensor - Energy Saving; Voltage/frequency ratio, 2 points |
| Synchronous motor control profile | Vector control without sensor |
| Maximum output frequency | 0.599 kHz |
| Acceleration and deceleration ramps | Linear; U; S; CUS; Ramp switching; Acceleration/deceleration ramp adaptation; Acceleration/deceleration automatic stop with DC injection |
| Motor slip compensation | Automatic whatever the load; Adjustable 0...300 %; Not available in voltage/frequency ratio (2 or 5 points) |
| Switching frequency | 2...16 kHz adjustable; 4...16 kHz with derating factor |
| Nominal switching frequency | 4 kHz |
| Braking to standstill | By DC injection |
| Brake chopper integrated | True |
| Line current | 10.1 A at 200 V (heavy duty); 8.4 A at 240 V (heavy duty) |
| Maximum input current | 10.1 A |
| Maximum output voltage | 240 V |
| Apparent power | 2.0 kVA at 240 V (heavy duty) |
| Network frequency | 50...60 Hz |
| Relative symmetric network frequency tolerance | 5 % |
| Prospective line Isc | 1 kA |
| Base load current at high overload | 33.0 A |
| Power dissipation in W | Self-cooled: 45.0 W at 200 V, switching frequency 4 kHz |
| With safety function Safely Limited Speed (SLS) | True |
| With safety function Safe brake management (SBC/SBT) | False |
| With safety function Safe Operating Stop (SOS) | False |
| With safety function Safe Position (SP) | False |
| With safety function Safe programmable logic | False |
| With safety function Safe Speed Monitor (SSM) | False |
| With safety function Safe Stop 1 (SS1) | True |
| With sft fct Safe Stop 2 (SS2) | False |
| With safety function Safe torque off (STO) | True |
| With safety function Safely Limited Position (SLP) | False |
| With safety function Safe Direction (SDI) | False |
| Protection type | Input phase breaks: drive; Overcurrent between output phases and earth: drive; Overheating protection: drive; Short-circuit between motor phases: drive; Thermal protection: drive |
| Width | 72.0 mm |
| Height | 143.0 mm |
| Depth | 138.0 mm |
| Net weight | 1.1 kg |
| Transient overtorque | 170…200 % of nominal motor torque |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Operating position | Vertical +/- 10 degree |
| Product certifications | CE; ATEX; NOM; GOST; EAC; RCM; KC |
| Marking | CE; ATEX; UL; CSA; EAC; RCM |
| Standards | IEC 61800-5-1 |
| Electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3 |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13...200 Hz |
| Maximum deflection under vibratory load (during operation) | 1.5 mm at 2...13 Hz |
| Permitted relative humidity (during operation) | Class 3K5 according to EN 60721-3 |
| Overvoltage category | III |
| Regulation loop | Adjustable PID regulator |
| Speed accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| Pollution degree | 2 |
| Ambient air transport temperature | -25…70 °C |
| Ambient air temperature for operation | -10…50 °C without derating; 50…60 °C with derating factor |
| Ambient air temperature for storage | -25…70 °C |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Altivar Machine ATV320 |
| Product or component type | Variable speed drive |
| Product specific application | Complex machines |
| Variant | Standard version |
| Format of the drive | Compact |
| Mounting mode | Wall mount |
| Communication port protocol | Modbus serial; CANopen |
| Option card | Communication module, CANopen; Communication module, EtherCAT; Communication module, Profibus DP V1; Communication module, PROFINET; Communication module, Ethernet Powerlink; Communication module, EtherNet/IP; Communication module, DeviceNet |
| [Us] rated supply voltage | 200...240 V - 15...10 % |
| nominal output current | 4.8 A |
| Motor power kW | 0.75 kW for heavy duty |
| Motor power hp | 1 hp |
| EMC filter | Class C2 EMC filter integrated |
| IP degree of protection | IP20 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.500 cm |
| Package 1 Width | 18.500 cm |
| Package 1 Length | 19.000 cm |
| Package 1 Weight | 1.339 kg |
| Unit Type of Package 2 | S06 |
| Number of Units in Package 2 | 45 |
| Package 2 Height | 75.000 cm |
| Package 2 Width | 60.000 cm |
| Package 2 Length | 80.000 cm |
| Package 2 Weight | 72.940 kg |
The ATV320U07M2C frequency inverter from Schneider Electric is a compact variable-speed drive from the Altivar Machine ATV320 series, specifically designed for use in complex machinery. It is rated for a nominal operating voltage of 200 to 240 V (±10 %) and is suitable for single-phase supply voltages in the range of 200–240 V at 50/60 Hz. The rated output power is 0.75 kW in heavy-duty operation, equivalent to a motor power of 1 hp. The inverter is designed for surface mounting and features an integrated EMC filter of class C2, which can be deactivated. The protection rating IP20 ensures protection against contact and entry of solid foreign objects, but not against water or dust. Dimensions are 72 mm (width) × 143 mm (height) × 138 mm (depth).
The ATV320U07M2C is designed for industrial applications involving complex machinery where precise speed control and high operational safety are required. It is particularly suitable for drives with asynchronous and synchronous motors in open-loop operation, i.e., without a mechanical feedback device. The integrated safety technology includes five functions: safe torque off (STO), safe hold 1 (SS1), safe limited speed (SLS), safe guarded door lock (GDL), and safe maximum speed (SMS). These functions enable use in safety-critical applications, particularly in automation technology.
The inverter features 7 discrete inputs, including one STO safety input (24 V DC, impedance 1.5 kOhm) and six logic inputs (24 V DC, max. 30 V), where DI5 is programmable as a pulse input (0–30 kHz). The logic of the inputs can be configured as positive (source) or negative (sink) logic. There are 3 discrete outputs, implemented as open collector (0–1 kHz, 30 V DC, 100 mA). Additionally, there are 3 analog inputs: AI1 (0–10 V DC, 30 kOhm, 10 bit), AI2 (±10 V DC, 30 kOhm, 10 bit), and AI3 (0–20 mA, 250 Ohm, 10 bit), where AI3 is configurable (e.g., 4–20 mA). One analog output (AQ1) is software-configurable for current (0–20 mA, 800 Ohm) or voltage (0–10 V DC, 470 Ohm), each with 10-bit resolution. The relay outputs (R1A, R1B, R1C, R2A, R2C) are configurable, with R1A/B/C capable of switching up to 3 A at 250 V AC or 3 A at 30 V DC, while R2A/C can switch up to 5 A at 250 V AC or 30 V DC. The minimum switching current is 5 mA at 24 V DC.
The inverter supports various control profiles: U/f characteristic curve (2- and 5-point), U/f energy-saving mode, quadratic U/f characteristic curve, and sensorless vector control (SVC) for asynchronous motors. For synchronous motors, sensorless vector control is also available. The maximum output frequency is 599 Hz. Acceleration and deceleration ramps can be configured as linear, U-shaped, S-shaped, CUS-shaped, or via ramp switching. Automatic ramp adjustment and automatic stop with DC injection braking are also possible. Motor slip compensation is automatic and independent of load, with settings from 0 to 300 %—though not applicable for U/f curves with 2 or 5 points. The integrated braking module enables 4-quadrant operation without additional components.
The ATV320U07M2C is compatible with various communication protocols: Modbus serial and CANopen. Optional communication modules for EtherCAT, Profibus DP V1, Profinet, Ethernet Powerlink, EtherNet/IP, and DeviceNet can be retrofitted. Suitable accessories include power contactors (e.g. LC1D09BL, LC1D09FE7), line reactors (e.g. VZ1L007UM50), motor protection circuit breakers (e.g. GV2L16), mechanical adapters (e.g. VW3A3600), and various option cards (e.g. VW3A3607 for Profibus DPv1, VW3A3627 for Profinet). Configuration can be performed using tools such as the commissioning software SoMove, decentralized terminals, or configuration tools like Simple-Loader and Multi-Loader.
The inverter is designed for surface mounting and is delivered with an EMC plate for customer-side mounting. The integrated safety technology requires no additional safety modules. Commissioning is done via Plug & Drive, with the inverter pre-configured for common applications. Configuration can be secured, loaded, or edited using various tools.
The ATV320U07M2C offers high operational safety through integrated safety functions, flexible configuration via various inputs and outputs, and easy commissioning. The 4-quadrant operation enabled by the integrated braking module reduces the need for additional components. Sensorless vector control (SVC) ensures high speed accuracy and stability, while U/f control and energy-saving functions optimize energy consumption. The integrated EMC technology (class C2, deactivatable) allows operation on IT networks without additional filtering measures.