Schneider Electric ATV320U02M3C, EAN: 3606480966583

Schneider Electric ATV320U02M3C frequency converter 230 V

Industrial Material > Automation > Frequency converter, soft starter

Schneider Electric ATV320U02M3C frequency converter 230 V

Lieske Part No. 1859822
Mfg Part No ATV320U02M3C
EAN-Code 3606480966583
Manufacturer Schneider Electric
Here only 291,65 EUR
347,06 EUR incl. VAT

Further information for Schneider Electric ATV320U02M3C frequency converter 230 V

Complementary
Discrete input number7
Discrete input typeSTO safe torque off, 24 V DC, impedance: 1.5 kOhm; DI1...DI6 logic inputs, 24 V DC (30 V); DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V)
Discrete input logicPositive logic (source); Negative logic (sink)
Discrete output number3
Discrete output typeOpen collector DQ+ 0…1 kHz 30 V DC 100 mA; Open collector DQ- 0…1 kHz 30 V DC 100 mA
Analogue input number3
Analogue input typeAI1 voltage: 0...10 V DC, impedance: 30 kOhm, resolution 10 bits; AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bits; AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits
Analogue output number1
Analogue output typeSoftware-configurable current AQ1: 0...20 mA impedance 800 Ohm, resolution 10 bits; Software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits
Relay output typeConfigurable relay logic R1A 1 NO electrical durability 100000 cycles; Configurable relay logic R1B 1 NC electrical durability 100000 cycles; Configurable relay logic R1C; Configurable relay logic R2A 1 NO electrical durability 100000 cycles; Configurable relay logic R2C
Maximum switching currentRelay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 250 V AC; Relay output R1A, R1B, R1C on resistive load, cos phi = 1: 3 A at 30 V DC; Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC; Relay output R1A, R1B, R1C, R2A, R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC; Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 250 V AC; Relay output R2A, R2C on resistive load, cos phi = 1: 5 A at 30 V DC
Minimum switching currentRelay output R1A, R1B, R1C, R2A, R2C: 5 mA at 24 V DC
Method of accessSlave CANopen
4 quadrant operation possibleTrue
Asynchronous motor control profileVoltage/frequency ratio, 5 points; Flux vector control without sensor, standard; Voltage/frequency ratio - Energy Saving, quadratic U/f; Flux vector control without sensor - Energy Saving; Voltage/frequency ratio, 2 points
Synchronous motor control profileVector control without sensor
Maximum output frequency0.599 kHz
Acceleration and deceleration rampsLinear; U; S; CUS; Ramp switching; Acceleration/deceleration ramp adaptation; Acceleration/deceleration automatic stop with DC injection
Motor slip compensationAutomatic whatever the load; Adjustable 0...300 %; Not available in voltage/frequency ratio (2 or 5 points)
Switching frequency2...16 kHz adjustable; 4...16 kHz with derating factor
Nominal switching frequency4 kHz
Braking to standstillBy DC injection
Brake chopper integratedTrue
Line current2.0 A at 200 V (heavy duty); 1.7 A at 240 V (heavy duty)
Maximum input current3.4 A
Maximum output voltage240 V
Apparent power0.7 kVA at 240 V (heavy duty)
Network frequency50...60 Hz
Relative symmetric network frequency tolerance5 %
Prospective line Isc5 kA
Base load current at high overload1.5 A
Power dissipation in WSelf-cooled: 15.0 W at 200 V, switching frequency 4 kHz
With safety function Safely Limited Speed (SLS)True
With safety function Safe brake management (SBC/SBT)False
With safety function Safe Operating Stop (SOS)False
With safety function Safe Position (SP)False
With safety function Safe programmable logicFalse
With safety function Safe Speed Monitor (SSM)False
With safety function Safe Stop 1 (SS1)True
With sft fct Safe Stop 2 (SS2)False
With safety function Safe torque off (STO)True
With safety function Safely Limited Position (SLP)False
With safety function Safe Direction (SDI)False
Protection typeInput phase breaks: drive; Overcurrent between output phases and earth: drive; Overheating protection: drive; Short-circuit between motor phases: drive; Thermal protection: drive
Width72.0 mm
Height143.0 mm
Depth109.0 mm
Net weight0.8 kg
Transient overtorque170…200 % of nominal motor torque
Contractual warranty
Warranty (in months)18
Environment
Operating positionVertical +/- 10 degree
Product certificationsCE; ATEX; NOM; GOST; EAC; RCM; KC
MarkingCE; ATEX; UL; CSA; EAC; RCM
StandardsIEC 61800-5-1
Electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3
Maximum acceleration under shock impact (during operation)150 m/s² at 11 ms
Maximum acceleration under vibrational stress (during operation)10 m/s² at 13...200 Hz
Maximum deflection under vibratory load (during operation)1.5 mm at 2...13 Hz
Permitted relative humidity (during operation)Class 3K5 according to EN 60721-3
Overvoltage categoryIII
Regulation loopAdjustable PID regulator
Speed accuracy+/- 10 % of nominal slip 0.2 Tn to Tn
Pollution degree2
Ambient air transport temperature-25…70 °C
Ambient air temperature for operation-10…50 °C without derating; 50…60 °C with derating factor
Ambient air temperature for storage-25…70 °C
Logistical informations
Country of originID
Main
Range of productAltivar Machine ATV320
Product or component typeVariable speed drive
Product specific applicationComplex machines
VariantStandard version
Format of the driveCompact
Mounting modeWall mount
Communication port protocolModbus serial; CANopen
Option cardCommunication module, CANopen; Communication module, EtherCAT; Communication module, Profibus DP V1; Communication module, PROFINET; Communication module, Ethernet Powerlink; Communication module, EtherNet/IP; Communication module, DeviceNet
[Us] rated supply voltage200...240 V - 15...10 %
nominal output current1.5 A
Motor power kW0.18 kW for heavy duty
Motor power hp0.25 hp
EMC filterWithout EMC filter
IP degree of protectionIP20
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height11.500 cm
Package 1 Width18.500 cm
Package 1 Length19.000 cm
Package 1 Weight971.000 g
Unit Type of Package 2P06
Number of Units in Package 245
Package 2 Height75.000 cm
Package 2 Width60.000 cm
Package 2 Length80.000 cm
Package 2 Weight56.695 kg
Altivar ATV320 frequency converter. 3 phase, motor power 0.18kW, rated voltage 200V. Slip compensation automatic, independent of the load - adjustable from 0-300% - Not available with the U/f characteristics (2 or 5 points). Without EMC filter. Without fan. Meets simple and advanced application requirements for 3-phase synchronous and asynchronous motors. Protection class IP20 corresponds to EN/IEC 61800-5-1, certifications according to UL, EAC, RCM, CSA, NOM 117.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1859822
qrcode für Schneider Electric ATV320U02M3C frequency converter 230 V