Schneider Electric ATV12H018M3, EAN: 3606480071140

Schneider Electric ATV12H018M3 frequency converter 0,18 kW 3x200 V

Industrial Material > Automation > Frequency converter, soft starter

Schneider Electric ATV12H018M3 frequency converter 0,18 kW 3x200 V

Lieske Part No. 627491
Mfg Part No ATV12H018M3
EAN-Code 3606480071140
Manufacturer Schneider Electric
Here only 267,90 EUR
318,80 EUR incl. VAT

Further information for Schneider Electric ATV12H018M3 frequency converter 0,18 kW 3x200 V

Complementary
Discrete input number4
Discrete output number2
Analogue input number1
Analogue output number1
Relay output number1
Physical interface2-wire RS 485
Connector type1 RJ45
Continuous output current1.4 A at 4 kHz
Method of accessServer Modbus serial
Speed drive output frequency0.5…400 Hz
Speed range1…20
Sampling duration20 ms, tolerance +/- 1 ms for logic input; 10 ms for analogue input
Linearity error+/- 0.3 % of maximum value for analogue input
Frequency resolutionAnalog input: converter A/D, 10 bits; Display unit: 0.1 Hz
Time constant20 ms +/- 1 ms for reference change
Transmission rate9.6 kbit/s; 19.2 kbit/s; 38.4 kbit/s
Transmission frameRTU
Number of addresses1…247
Data format8 bits, configurable odd, even or no parity
Communication serviceRead holding registers (03) 29 words; Write single register (06) 29 words; Write multiple registers (16) 27 words; Read/write multiple registers (23) 4/4 words; Read device identification (43)
Type of polarizationNo impedance
4 quadrant operation possibleFalse
Asynchronous motor control profileSensorless flux vector control; Voltage/frequency ratio (V/f); Quadratic voltage/frequency ratio
Maximum output frequency4 kHz
Transient overtorque150…170 % of nominal motor torque depending on drive rating and type of motor
Acceleration and deceleration rampsU; Linear from 0 to 999.9 s; S
Motor slip compensationAdjustable; Preset in factory
Switching frequency2...16 kHz adjustable; 4...16 kHz with derating factor
Nominal switching frequency4 kHz
Braking to standstillBy DC injection
Brake chopper integratedFalse
Line current2.0 A at 100 V (heavy duty); 1.7 A at 120 V (heavy duty)
Maximum input current1.7 A
Maximum output voltage240 V
Apparent power0.7 kVA at 240 V (heavy duty)
Maximum transient current2.1 A during 60 s (heavy duty); 2.3 A during 2 s (heavy duty)
Network frequency50...60 Hz
Relative symmetric network frequency tolerance5 %
Prospective line Isc5 kA
Base load current at high overload1.4 A
Power dissipation in WNatural: 16.0 W
With safety function Safely Limited Speed (SLS)False
With safety function Safe brake management (SBC/SBT)False
With safety function Safe Operating Stop (SOS)False
With safety function Safe Position (SP)False
With safety function Safe programmable logicFalse
With safety function Safe Speed Monitor (SSM)False
With safety function Safe Stop 1 (SS1)False
With sft fct Safe Stop 2 (SS2)False
With safety function Safe torque off (STO)False
With safety function Safely Limited Position (SLP)False
With safety function Safe Direction (SDI)False
Protection typeLine supply overvoltage; Line supply undervoltage; Overcurrent between output phases and earth; Overheating protection; Short-circuit between motor phases; Against input phase loss in three-phase; Thermal motor protection via the drive by continuous calculation of I²t
Tightening torque0.8 N.m
InsulationElectrical between power and control
Quantity per setSet of 1
Width72 mm
Height143 mm
Depth102.2 mm
Net weight0.7 kg
Contractual warranty
Warranty (in months)18
Environment
Operating altitude1000...3000 m with current derating 1 % per 100 m
Operating positionVertical +/- 10 degree
Product certificationsNOM; CSA; C-Tick; UL; GOST; RCM; KC
MarkingCE
StandardsUL 508C; UL 618000-5-1; IEC 61800-5-1; IEC 61800-3
Assembly styleOn base plate
Electromagnetic compatibilityElectrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Immunity to conducted disturbances level 3 conforming to IEC 61000-4-6; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Surge immunity test level 3 conforming to IEC 61000-4-5; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3
Maximum acceleration under shock impact (during operation)150 m/s² at 11 ms
Maximum acceleration under vibrational stress (during operation)10 m/s² at 13...200 Hz
Maximum deflection under vibratory load (during operation)1.5 mm at 2...13 Hz
Overvoltage categoryClass III
Regulation loopAdjustable PID regulator
Electromagnetic emissionRadiated emissions environment 1 category C2 conforming to IEC 61800-3 2...16 kHz shielded motor cable; Conducted emissions with additional EMC filter environment 1 category C2 conforming to IEC 61800-3 4...12 kHz shielded motor cable
Vibration resistance1 gn (f = 13…200 Hz) conforming to IEC 60068-2-6; 1.5 mm peak to peak (f = 3…13 Hz) - drive unmounted on symmetrical DIN rail - conforming to IEC 60068-2-6
Shock resistance15 gn conforming to IEC 60068-2-27 for 11 ms
Relative humidity5…95 % without condensation conforming to IEC 60068-2-3; 5…95 % without dripping water conforming to IEC 60068-2-3
Noise level0 dB
Pollution degree2
Ambient air transport temperature-25…70 °C
Ambient air temperature for operation-10…40 °C without derating; 40…60 °C with current derating 2.2 % per °C
Ambient air temperature for storage-25…70 °C
Logistical informations
Country of originID
Main
Range of productAltivar 12
Product or component typeVariable speed drive
Product specific applicationSimple machine
Mounting modeCabinet mount
Communication port protocolModbus
Supply frequency50/60 Hz +/- 5 %
[Us] rated supply voltage200...240 V - 15...10 %
nominal output current1.4 A
Motor power kW0.18 kW
Motor power hp0.25 hp
EMC filterWithout EMC filter
IP degree of protectionIP20
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height12.000 cm
Package 1 Width18.700 cm
Package 1 Length19.000 cm
Package 1 Weight1.024 kg
Unit Type of Package 2S06
Number of Units in Package 245
Package 2 Height75.000 cm
Package 2 Width60.000 cm
Package 2 Length80.000 cm
Package 2 Weight59.080 kg
Schneider Electric Altivar 12 FrequenzumrichterNEU
Ideal for simple applications
for the operation of three-phase asynchronous motors
run on heatsink
0.18, power: 200 .. 240 V, 3-phase, 50/60 Hz, stackable
convenient operating dialogue on integrated
display terminal or Inbetriebnahmesoftare SoMove
Funktionstörfilter Class A + B integrated (eg deactivated at any time for use on
IT mains), default protection varnished PCBs. Vector control brings high
speed quality and stability even at very low speeds. Type: ATV12H018M3 item: 1 ST.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/627491
qrcode für Schneider Electric ATV12H018M3 frequency converter 0,18 kW 3x200 V