| Complementary |
| Discrete input number | 4 |
| Discrete output number | 2 |
| Analogue input number | 1 |
| Analogue output number | 1 |
| Relay output number | 1 |
| Physical interface | 2-wire RS 485 |
| Connector type | 1 RJ45 |
| Continuous output current | 1.4 A at 4 kHz |
| Method of access | Server Modbus serial |
| Speed drive output frequency | 0.5…400 Hz |
| Speed range | 1…20 |
| Sampling duration | 20 ms, tolerance +/- 1 ms for logic input; 10 ms for analogue input |
| Linearity error | +/- 0.3 % of maximum value for analogue input |
| Frequency resolution | Analog input: converter A/D, 10 bits; Display unit: 0.1 Hz |
| Time constant | 20 ms +/- 1 ms for reference change |
| Transmission rate | 9.6 kbit/s; 19.2 kbit/s; 38.4 kbit/s |
| Transmission frame | RTU |
| Number of addresses | 1…247 |
| Data format | 8 bits, configurable odd, even or no parity |
| Communication service | Read holding registers (03) 29 words; Write single register (06) 29 words; Write multiple registers (16) 27 words; Read/write multiple registers (23) 4/4 words; Read device identification (43) |
| Type of polarization | No impedance |
| 4 quadrant operation possible | False |
| Asynchronous motor control profile | Voltage/frequency ratio (V/f); Sensorless flux vector control; Quadratic voltage/frequency ratio |
| Maximum output frequency | 4 kHz |
| Transient overtorque | 150…170 % of nominal motor torque depending on drive rating and type of motor |
| Acceleration and deceleration ramps | U; Linear from 0 to 999.9 s; S |
| Motor slip compensation | Preset in factory; Adjustable |
| Switching frequency | 2...16 kHz adjustable; 4...16 kHz with derating factor |
| Nominal switching frequency | 4 kHz |
| Braking to standstill | By DC injection |
| Brake chopper integrated | False |
| Line current | 3.4 A at 100 V (heavy duty); 2.8 A at 120 V (heavy duty) |
| Maximum input current | 2.8 A |
| Maximum output voltage | 240 V |
| Apparent power | 0.7 kVA at 240 V (heavy duty) |
| Maximum transient current | 2.1 A during 60 s (heavy duty); 2.3 A during 2 s (heavy duty) |
| Network frequency | 50...60 Hz |
| Relative symmetric network frequency tolerance | 5 % |
| Prospective line Isc | 1 kA |
| Base load current at high overload | 1.4 A |
| Power dissipation in W | Natural: 18.0 W |
| With safety function Safely Limited Speed (SLS) | False |
| With safety function Safe brake management (SBC/SBT) | False |
| With safety function Safe Operating Stop (SOS) | False |
| With safety function Safe Position (SP) | False |
| With safety function Safe programmable logic | False |
| With safety function Safe Speed Monitor (SSM) | False |
| With safety function Safe Stop 1 (SS1) | False |
| With sft fct Safe Stop 2 (SS2) | False |
| With safety function Safe torque off (STO) | False |
| With safety function Safely Limited Position (SLP) | False |
| With safety function Safe Direction (SDI) | False |
| Protection type | Line supply overvoltage; Line supply undervoltage; Overcurrent between output phases and earth; Overheating protection; Short-circuit between motor phases; Against input phase loss in three-phase; Thermal motor protection via the drive by continuous calculation of I²t |
| Tightening torque | 0.8 N.m |
| Insulation | Electrical between power and control |
| Quantity per set | Set of 1 |
| Width | 72 mm |
| Height | 143 mm |
| Depth | 102.2 mm |
| Net weight | 0.7 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Operating altitude | > 1000...2000 m with current derating 1 % per 100 m; |
| Operating position | Vertical +/- 10 degree |
| Product certifications | NOM; CSA; C-Tick; UL; GOST; RCM; KC |
| Marking | CE |
| Standards | UL 508C; UL 618000-5-1; IEC 61800-5-1; IEC 61800-3 |
| Assembly style | On base plate |
| Electromagnetic compatibility | Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Immunity to conducted disturbances level 3 conforming to IEC 61000-4-6; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Surge immunity test level 3 conforming to IEC 61000-4-5; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3 |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13...200 Hz |
| Maximum deflection under vibratory load (during operation) | 1.5 mm at 2...13 Hz |
| Overvoltage category | Class III |
| Regulation loop | Adjustable PID regulator |
| Electromagnetic emission | Radiated emissions environment 1 category C2 conforming to IEC 61800-3 2...16 kHz shielded motor cable; Conducted emissions with integrated EMC filter environment 1 category C1 conforming to IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable |
| Vibration resistance | 1 gn (f = 13…200 Hz) conforming to IEC 60068-2-6; 1.5 mm peak to peak (f = 3…13 Hz) - drive unmounted on symmetrical DIN rail - conforming to IEC 60068-2-6 |
| Shock resistance | 15 gn conforming to IEC 60068-2-27 for 11 ms |
| Relative humidity | 5…95 % without condensation conforming to IEC 60068-2-3; 5…95 % without dripping water conforming to IEC 60068-2-3 |
| Noise level | 0 dB |
| Pollution degree | 2 |
| Ambient air transport temperature | -25…70 °C |
| Ambient air temperature for operation | -10…40 °C without derating; 40…60 °C with current derating 2.2 % per °C |
| Ambient air temperature for storage | -25…70 °C |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Altivar 12 |
| Product or component type | Variable speed drive |
| Product specific application | Simple machine |
| Mounting mode | Cabinet mount |
| Communication port protocol | Modbus |
| Supply frequency | 50/60 Hz +/- 5 % |
| [Us] rated supply voltage | 200...240 V - 15...10 % |
| nominal output current | 1.4 A |
| Motor power kW | 0.18 kW |
| Motor power hp | 0.25 hp |
| EMC filter | Integrated |
| IP degree of protection | IP20 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 11.500 cm |
| Package 1 Width | 18.600 cm |
| Package 1 Length | 19.500 cm |
| Package 1 Weight | 887.000 g |
| Unit Type of Package 2 | S06 |
| Number of Units in Package 2 | 45 |
| Package 2 Height | 75.000 cm |
| Package 2 Width | 60.000 cm |
| Package 2 Length | 80.000 cm |
| Package 2 Weight | 52.780 kg |
The ATV12H018M2 frequency converter from Schneider Electric belongs to the Altivar 12 series and is designed as a variable-speed drive for use in simple industrial machines as well as in certain machines in the consumer goods sector. It features a motor power of 0.18 kW (equivalent to 0.25 hp) and is designed for an operating voltage of 200 to 240 V at a frequency of 50/60 Hz ±5 %. The compact design with integrated heatsink enables mounting in an enclosure and simple installation according to the Plug & Drive principle. The converter is factory pre-configured, allowing immediate commissioning without additional configuration.
Applications
The ATV12H018M2 is specifically designed for applications in simple machines where precise speed control is required. It is suitable, for example, for conveyor systems, pumps, fans, or small machine tools in industrial environments. The robust construction ensures reliable operation even under challenging environmental conditions, including an operating temperature of up to 50 °C in continuous operation.
Functions and Equipment in Detail
The converter features integrated EMC filtering to minimize network disturbances. It includes 4 discrete inputs, 2 discrete outputs, 1 analog input, and 1 analog output. Communication is via a 2-wire RS485 interface with RJ45 connector, supporting the Modbus protocol (RTU format). The transmission speed can be set to 9.6, 19.2, or 38.4 Kbit/s. Access is via serial Modbus server. The number of addresses ranges from 1 to 247, with data format supporting 8 bits and configurable parity (odd, even, or none).
Technology Explained Simply
The converter operates in voltage/frequency mode (U/f) with a quadratic characteristic curve and offers vector-oriented flux control without a sensor. The output frequency of the speed controller ranges from 0.5 to 400 Hz, with a speed control range of 1 to 20, enabling flexible adaptation to different drive requirements. The switching frequency is adjustable between 2 and 16 kHz, with a power derating factor applying at 4 to 16 kHz. The rated switching frequency is 4 kHz. Acceleration and deceleration ramps can be set linearly (0–999.9 s) or in U- and S-shape. Motor slip compensation is factory activated and can be adjusted. Braking is achieved via DC injection, with no integrated braking chopper. Four-quadrant operation is not possible.
Compatibility and Accessories
Various accessories are available to extend functionality and adapt to specific requirements. These include line reactors (e.g., 10 mH, 4 A), motor protection switches such as the GV2ME08, and various contactors from the LC1K and LP1K series in different voltage variants (e.g., 24 VDC, 48 VDC, 230 VAC, 400 VAC). Additionally, DIN rail adapters (e.g., VW3A9804) and EMC connection plates (e.g., VW3A9523) are available, facilitating integration into existing control panels.
Mounting and Installation
The frequency converter is designed for mounting in an enclosure and features a base plate construction that enables easy fastening. Installation follows the Plug & Drive principle, allowing quick commissioning without extensive settings. Configuration can be performed using various tools, including the commissioning software SoMove, the mobile application SoMove Mobile, decentralized terminals, and configuration tools Simple-Loader and Multi-Loader. Notably, configurations can also be loaded and saved in de-energized state using the Multi-Loader tool without removing the device from its packaging.
Advantages in Operation
The ATV12H018M2 is characterized by high operational safety and reliability. The integrated EMC filtering ensures minimal network interference. Factory pre-configuration and support from various configuration tools significantly reduce commissioning time. The maximum output voltage is 240 V, and the rated output current is 1.4 A. The maximum peak current is 2.3 A for 2 seconds (heavy-duty operation). The power loss in natural cooling mode is 18.0 W. The protection class IP20 protects against finger contact and solid foreign objects, but not against splashing water or dust. No safety functions such as Safely Limited Speed (SLS), Safe brake management (SBC/SBT), Safe Operating Stop (SOS), Safe Position (SP), Safe programmable logic, Safe Speed Monitor (SSM), or Safe Stop are integrated.