Schneider Electric ATS480C32Y, EAN: 3606481089120

Schneider Electric ATS480C32Y soft starter 320 A

Industrial Material > Automation > Frequency converter, soft starter

Schneider Electric ATS480C32Y soft starter 320 A

Lieske Part No. 599248
Mfg Part No ATS480C32Y
EAN-Code 3606481089120
Manufacturer Schneider Electric
Here only 5.819,70 EUR
6.925,44 EUR incl. VAT

Further information for Schneider Electric ATS480C32Y soft starter 320 A

Complementary
Device connectionIn the motor supply line; To the motor delta terminals
[Us] control circuit voltage110...230 V AC 50/60 Hz - 15...10 %
Apparent power0.106 kVA
Integrated motor overload protectionTrue
motor thermal protection classClass 10E
Protection typePhase failure: line; Integrated thermal protection: motor; Thermal protection: starter; Current overload: motor; Underload: motor; Excessive starting time, locked rotor: motor; Motor phase loss: motor; Line supply phase loss: line; Line supply phase loss: motor; Thermal protection: motor
current limiting %In (5 x Ie maximum)150…700 %
Rated current pwr loss specification320.0 A
Power loss static current independent25.0 W
Power loss per device current dependent882.0 W
StandardsIEC 60947-4-2; UL 60947-4-2; IEC 60664-1
Product certificationsCE; cULus; CCC; UKCA; RCM; EAC; DNV; ABS; BV; CCS
MarkingCE; CCC; UKCA; EAC; RCM; CULus
[Uc] control circuit voltage24 V DC
Discrete input number4
Discrete input type(STOP) logic inputs, 3500 Ohm; (RUN) logic inputs, 3500 Ohm; (DI3) programmable as logic input, 3500 Ohm; (DI4) programmable as logic input, 3500 Ohm
Input compatibilitySTOP: discrete input level 1 PLC conforming to IEC 61131-2; RUN: discrete input level 1 PLC conforming to IEC 61131-2; DI3: discrete input level 1 PLC conforming to IEC 61131-2; DI4: discrete input level 1 PLC conforming to IEC 61131-2
Discrete input logicProgrammable digital input at State 0: < 5 V
Relay output number3
Relay output typeRelay outputs R1A 1 NO; Relay outputs R1B 1 NO; Relay outputs RIC NO/NC programmable
Minimum switching current100 mA at 12 V DC for relay outputs
Maximum switching currentRelay outputs 2 A at 250 V AC; Relay outputs 2 A at 30 V DC; Relay outputs
Discrete output number2
Discrete output type(DQ1) programmable digital output
Output compatibilityOpen collector level 1 PLC conforming to IEC 65A-68
Analogue input number1
Analogue input typeAI1/PTC PTC/Pt 100 temperature probe; PTC2 PTC/Pt 100 temperature probe; PTC3 PTC/Pt 100 temperature probe
Analogue output number1
Analogue output typeCurrent output AQ1: 0...20 mA or 0...10 V, impedance
Communication port protocolModbus serial
Connector type1 RJ45
Communication data linkSerial
Physical interface2-wire RS 485
Transmission rate1200...256000 bit/s
Transmission frameRTU
Data format8 bits, configurable odd, even or no parity
Type of polarizationNo impedance for Modbus serial
Number of addresses0…227 for Modbus serial
Method of accessSlave Modbus serial
Function availableExternal bypass control; Pre-heating; Smoke extraction; Multi-motor cascade; Second motor set; User management; Ports and services hardening; Security event logging; Cybersecure firmware update; Single direction
Display screen availableTrue
Operating positionVertical +/- 10 degree
Height380.0 mm
Width320.0 mm
Depth277.0 mm
Net weight18.2 kg
Contractual warranty
Warranty (in months)18
Environment
Electromagnetic compatibilityConducted and radiated emissions level A conforming to IEC 60947-4-2; Conducted and radiated emissions with bypass level B conforming to IEC 60947-4-2; Damped oscillating waves level 3 conforming to IEC 61000-4-12; Electrostatic discharge level 3 conforming to IEC 61000-4-11; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Voltage/current impulse level 3 conforming to IEC 61000-4-5
Pollution degreeLevel 3
[Uimp] rated impulse withstand voltage6 kV
[Ui] rated insulation voltage690 V
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3
Relative humidity0…95 % without condensation or dripping water conforming to IEC 60068-2-3
Ambient air temperature for operation40…60 °C (with current derating of 2 % per °C); -15…40 °C (without derating)
Ambient air temperature for storage-25…70 °C
Operating altitude1000...4000 m with current derating 1 % per 100 m
Maximum deflection under vibratory load (during operation)1.5 mm at 2...13 Hz
Maximum deflection under vibratory load (during storage)1.75 mm at 2...9 Hz
Maximum deflection under vibratory load (during transport)1.75 mm at 2...9 Hz
Maximum acceleration under vibrational stress (during operation)10 m/s² at 13...200 Hz
Maximum acceleration under vibratory load (during storage)15 m/s² at 200...500 Hz; 10 m/s² at 9...200 Hz
Maximum acceleration under vibratory load (during transport)15 m/s² at 200...500 Hz; 10 m/s² at 9...200 Hz
Maximum acceleration under shock impact (during operation)150 m/s² at 11 ms
Maximum acceleration under shock load (during storage)100 m/s² at 11 ms
Maximum acceleration under shock load (during transport)100 m/s² at 11 ms
Logistical informations
Country of originID
Main
Range of productAltivar Soft Starter ATS480
Product or component typeSoft starter
Product destinationAsynchronous motors
Product specific applicationProcess and infrastructures
Device short nameATS480
Network number of phases3 phases
Utilisation categoryAC-3A; AC-53A
Ue power supply voltage208...690 V - 15...10 %
power supply frequency50...60 Hz - 20...20 %
[Ie] rated operational currentNormal duty: 320.0 A (at
rated current in heavy duty250.0 A at 40 °C for heavy duty
Torque controlTrue
IP degree of protectionIP00
Motor power hp100.0 hp at 208 V normal duty; 75.0 hp at 208 V heavy duty; 125.0 hp at 230 V normal duty; 100.0 hp at 230 V heavy duty; 250.0 hp at 460 V normal duty; 200.0 hp at 460 V heavy duty; 300.0 hp at 575 V normal duty; 250.0 hp at 575 V heavy duty
Option cardCommunication module for Profibus DP V1; Communication module for Modbus TCP/EtherNet/IP; Communication module for CANopen daisy chain; Communication module for CANopen Sub-D; Communication module for CANopen open style; Communication module for PROFINET
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height50.000 cm
Package 1 Width40.000 cm
Package 1 Length60.100 cm
Package 1 Weight26.500 kg
Der Altivar Sanftanlasser ATS480 ist für das Starten und Stoppen von Asynchronmotoren mit Spannungen von 208V bis 690V vorgesehen. Er erfüllt die Anforderungen der anspruchsvollsten Anwendungen im normalen und schweren Einsatz. Mit einem Nennstrom von 320A bei normaler Überlast betreibt er Motoren von 90kW bis 315kW entsprechend der Netzspannung. Entwickelt für die Digitalisierung, vernetzt, optimiert für die Einhaltung von Cybersicherheitsstandards, vereinfacht er die Projektausführung und maximiert die Verfügbarkeit von Anwendungen. Seine Drehmomentregelung (TCS) meistert Beschleunigung und Verzögerung. Dank des dynamischen Bremsens und der Gleichstromeinspeisung werden Anwendungen mit hohem Trägheitsmoment effizient bewältigt. Es kann in die Motorleitung oder in Dreiecksschaltung angeschlossen werden, um den Betriebsstrom zu reduzieren. Die eingebettete Prüfroutine vereinfacht die Inbetriebnahme in Dreieckschaltung. Die Abmessungen betragen 320mm (Breite) x 277mm (Tiefe) x 380mm (Höhe) und das Gewicht beträgt 18,2kg. Der Altivar Sanftanlasser ATS480 wurde entwickelt, um Prozesse, Infrastrukturen und Industriemaschinen zu überwachen. Er ist konform zu IEC/EN60947-4-1. Er ist zertifiziert nach CE, cULus, UKCA, CCC, RCM, EAC, und Marinezertifiziert nach DNV, ABS, BV und CCS. Bedienterminals, Remote Montagesatz, sowie Kommunikationsmodule sind einheitlich mit den Altivar Drives. Netzdrosseln, DNV-Kits sind identisch zu Vorgänger ATS48. ATS480 ist kompatibel mit ATS48, er hat die gleiche Grundfläche, Befestigung, Drehmomentregelung, I/O, Menüs. Die Integration des Altivar Sanftanlassers ATS480 in EcoStruxure vereinfacht die Auswahl der Architektur, das detaillierte Design und die Ausführung von Belüftungs- und elektrischen Systemen drastisch. Es ist ein Green Premium-Produkt, das entwickelt wurde, um die Umweltaspekte über die aktuellen Richtlinien und Vorschriften hinaus zu berücksichtigen, und das mit RoHS und REACH konform ist.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/599248
qrcode für Schneider Electric ATS480C32Y soft starter 320 A