Complementary
Device connection	In the motor supply line; To the motor delta terminals
[Us] control circuit voltage	110...230 V AC 50/60 Hz - 15...10 %
Apparent power	0.09 kVA
Integrated motor overload protection	True
motor thermal protection class	Class 10E
Protection type	Phase failure: line; Integrated thermal protection: motor; Thermal protection: starter; Current overload: motor; Underload: motor; Excessive starting time, locked rotor: motor; Motor phase loss: motor; Line supply phase loss: line; Line supply phase loss: motor; Thermal protection: motor
current limiting %In (5 x Ie maximum)	150…700 %
Rated current pwr loss specification	110.0 A
Power loss static current independent	25.0 W
Power loss per device current dependent	302.0 W
Standards	IEC 60947-4-2; UL 60947-4-2; IEC 60664-1
Product certifications	CE; cULus; CCC; UKCA; RCM; EAC; DNV; ABS; BV; CCS
Marking	CE; CCC; UKCA; EAC; RCM; CULus
[Uc] control circuit voltage	24 V DC
Discrete input number	4
Discrete input type	(STOP) logic inputs, 3500 Ohm; (RUN) logic inputs, 3500 Ohm; (DI3) programmable as logic input, 3500 Ohm; (DI4) programmable as logic input, 3500 Ohm
Input compatibility	STOP: discrete input level 1 PLC conforming to IEC 61131-2; RUN: discrete input level 1 PLC conforming to IEC 61131-2; DI3: discrete input level 1 PLC conforming to IEC 61131-2; DI4: discrete input level 1 PLC conforming to IEC 61131-2
Discrete input logic	Programmable digital input at State 0: < 5 V
Relay output number	3
Relay output type	Relay outputs R1A 1 NO; Relay outputs R1B 1 NO; Relay outputs RIC NO/NC programmable
Minimum switching current	100 mA at 12 V DC for relay outputs
Maximum switching current	Relay outputs 2 A at 250 V AC; Relay outputs 2 A at 30 V DC; Relay outputs
Discrete output number	2
Discrete output type	(DQ1) programmable digital output
Output compatibility	Open collector level 1 PLC conforming to IEC 65A-68
Analogue input number	1
Analogue input type	AI1/PTC PTC/Pt 100 temperature probe; PTC2 PTC/Pt 100 temperature probe; PTC3 PTC/Pt 100 temperature probe
Analogue output number	1
Analogue output type	Current output AQ1: 0...20 mA or 0...10 V, impedance
Communication port protocol	Modbus serial
Connector type	1 RJ45
Communication data link	Serial
Physical interface	2-wire RS 485
Transmission rate	1200...256000 bit/s
Transmission frame	RTU
Data format	8 bits, configurable odd, even or no parity
Type of polarization	No impedance for Modbus serial
Number of addresses	0…227 for Modbus serial
Method of access	Slave Modbus serial
Function available	External bypass control; Pre-heating; Smoke extraction; Multi-motor cascade; Second motor set; User management; Ports and services hardening; Security event logging; Cybersecure firmware update; Single direction
Display screen available	True
Operating position	Vertical +/- 10 degree
Height	290.0 mm
Width	190.0 mm
Depth	247.0 mm
Net weight	8.3 kg
Contractual warranty
Warranty (in months)	18
Environment
Electromagnetic compatibility	Conducted and radiated emissions level A conforming to IEC 60947-4-2; Conducted and radiated emissions with bypass level B conforming to IEC 60947-4-2; Damped oscillating waves level 3 conforming to IEC 61000-4-12; Electrostatic discharge level 3 conforming to IEC 61000-4-11; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Voltage/current impulse level 3 conforming to IEC 61000-4-5
Pollution degree	Level 3
[Uimp] rated impulse withstand voltage	6 kV
[Ui] rated insulation voltage	690 V
Environmental class (during operation)	Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3
Relative humidity	0…95 % without condensation or dripping water conforming to IEC 60068-2-3
Ambient air temperature for operation	40…60 °C (with current derating of 2 % per °C); -15…40 °C (without derating)
Ambient air temperature for storage	-25…70 °C
Operating altitude	1000...4000 m with current derating 1 % per 100 m
Maximum deflection under vibratory load (during operation)	1.5 mm at 2...13 Hz
Maximum deflection under vibratory load (during storage)	1.75 mm at 2...9 Hz
Maximum deflection under vibratory load (during transport)	1.75 mm at 2...9 Hz
Maximum acceleration under vibrational stress (during operation)	10 m/s² at 13...200 Hz
Maximum acceleration under vibratory load (during storage)	15 m/s² at 200...500 Hz; 10 m/s² at 9...200 Hz
Maximum acceleration under vibratory load (during transport)	15 m/s² at 200...500 Hz; 10 m/s² at 9...200 Hz
Maximum acceleration under shock impact (during operation)	150 m/s² at 11 ms
Maximum acceleration under shock load (during storage)	100 m/s² at 11 ms
Maximum acceleration under shock load (during transport)	100 m/s² at 11 ms
Logistical informations
Country of origin	ID
Main
Range of product	Altivar Soft Starter ATS480
Product or component type	Soft starter
Product destination	Asynchronous motors
Product specific application	Process and infrastructures
Device short name	ATS480
Network number of phases	3 phases
Utilisation category	AC-3A; AC-53a
Ue power supply voltage	208...690 V - 15...10 %
power supply frequency	50...60 Hz - 20...20 %
[Ie] rated operational current	Normal duty: 110.0 A (at
rated current in heavy duty	88.0 A at 40 °C for heavy duty
Torque control	True
IP degree of protection	IP20
Motor power hp	30.0 hp at 208 V normal duty; 25.0 hp at 208 V heavy duty; 40.0 hp at 230 V normal duty; 30.0 hp at 230 V heavy duty; 75.0 hp at 460 V normal duty; 60.0 hp at 460 V heavy duty; 100.0 hp at 575 V normal duty; 75.0 hp at 575 V heavy duty
Option card	Communication module for Profibus DP V1; Communication module for Modbus TCP/EtherNet/IP; Communication module for CANopen daisy chain; Communication module for CANopen Sub-D; Communication module for CANopen open style; Communication module for PROFINET
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	37.000 cm
Package 1 Width	31.000 cm
Package 1 Length	39.000 cm
Package 1 Weight	9.656 kg
Unit Type of Package 2	P06
Number of Units in Package 2	8
Package 2 Height	86.000 cm
Package 2 Width	60.000 cm
Package 2 Length	80.000 cm
Package 2 Weight	87.500 kg

The Altivar ATS480 soft starter is designed for starting and stopping asynchronous motors with voltages from 208V to 690V. It meets the requirements of the most demanding applications in normal and heavy use. With a rated current of 110A at normal overload, it operates motors from 30kW to 90kW according to the mains voltage. Designed for digitalization, connected, optimized to comply with cybersecurity standards, it simplifies project execution and maximizes application availability. Its torque control (TCS) masters acceleration and deceleration. Thanks to dynamic braking and DC injection, high inertia applications are efficiently managed. It can be connected in the motor line or in delta connection to reduce the operating current. The embedded test routine simplifies commissioning in delta connection. The dimensions are 190mm (width) x 247mm (depth) x 290mm (height) and the weight is 8.3kg. The Altivar soft starter ATS480 was developed to monitor processes, infrastructures and industrial machines. It is compliant with IEC/EN60947-4-1. It is certified according to CE, cULus, UKCA, CCC, RCM, EAC, and marine certified according to DNV, ABS, BV and CCS. Operator terminals, remote mounting kit and communication modules are standard with the Altivar drives. Line chokes and DNV kits are identical to the predecessor ATS48. ATS480 is compatible with ATS48, it has the same footprint, mounting, torque control, I/O, menus... The integration of the Altivar soft starter ATS480 into EcoStruxure drastically simplifies the choice of architecture, detailed design and execution of ventilation and electrical systems. It is a Green Premium product, designed to take into account the environmental aspects beyond current directives and regulations, and is compliant with RoHS and REACH.