Schneider Electric ATS430C48S6, EAN: 3606486948736

Schneider Electric ATS430C48S6 soft starter 480A 208-600V

Schneider Electric ATS430C48S6 soft starter 480A 208-600V

Lieske Part No. 1956131
Mfg Part No ATS430C48S6
EAN-Code 3606486948736
Manufacturer Schneider Electric
Here only 3.285,55 EUR
3.909,80 EUR incl. VAT

Further information for Schneider Electric ATS430C48S6 soft starter 480A 208-600V

Complementary
Device connectionIn line
Overload current400 % Ie for 13 s
On-load factor50 %
Operating cycles/hour10 cyc/h
[Us] control circuit voltage110...230 V AC 50...60 Hz - 15...10 %
Apparent power70 VA
Integrated motor overload protectionTrue
motor thermal protection classClass 10E
Protection typePhase failure: mains; Thermal protection: mains; Thermal protection: starter; Current overload: motor; Motor underload: motor; Excessive acceleration time: motor; Motor phase loss detection: motor; Protection against line phase inversion: mains; External thermal protection: motor; Short-circuit between motor phase and earth: motor
current limiting %In (5 x Ie maximum)150…700 %
Rated current pwr loss specification480 A
Power loss static current independent19 W
Power loss per device current dependent81 W
Power loss during starting4551 W during starting at 40 °C at 400% In
StandardsEN/IEC 60947-4-2; UL 60947-4-2; IEC 60664-1
Product certificationscULus; CE; UKCA; CCC; RCM; EAC; KC
MarkingCULus; CE; UKCA; CCC; RCM; EAC; KC
[Uc] control circuit voltage24 V DC
Discrete input number4
Discrete input type(STOP) digital input, 4.4 kOhm; (RUN) digital input, 4.4 kOhm; (DI3) digital input, 4.4 kOhm; (DI4) digital input, 4.4 kOhm
Input compatibilitySTOP: digital input level 1 PLC conforming to EN/IEC 61131-2; RUN: digital input level 1 PLC conforming to EN/IEC 61131-2; DI3: digital input level 1 PLC conforming to EN/IEC 61131-2; DI4: digital input level 1 PLC conforming to EN/IEC 61131-2
Discrete input logicDigital input STOP at State 0: 0...< 5 V and 11 V, >= 5 mA; Digital input RUN at State 0: 0...< 5 V and 11 V, >= 5 mA; Digital input DI3 at State 0: 0...< 5 V and 11 V, >= 5 mA; Digital input DI4 at State 0: 0...< 5 V and 11 V, >= 5 mA
Relay output number2
Relay output typeRelay outputs R1A, R1C NO; Relay outputs R1B, R1C NC; Relay outputs R2A, R2C NO
Minimum switching current100 mA at 12 V DC for relay outputs
Maximum switching currentRelay outputs 2 A / 250 V AC for AC-15 100000 cycles following IEC 60947-5-1; Relay outputs 2 A / 30 V DC for DC-13 150000 cycles following IEC 60947-5-1
Analogue input number1
Analogue input typePTC1 : PTC temperature probe; PTC2 : PTC temperature probe
Analogue output number1
Analogue output typeCurrent output AQ1 : 0...20 mA/4...20 mA , impedance< 500 Ohm; Voltage output AQ1 : 0...10 V , impedance> 470 Ohm
Connector type1 RJ45; Open style
Physical interface2-wire RS 485 - connector(s): RJ45; 2-wire RS 485 - connector(s): open style (DO, D1, PE, COM)
Transmission frameRTU : 1 RJ45; RTU : open style (DO, D1, PE, COM)
Transmission rate4.8…38.4 kbps for Modbus serial RJ45; 0.3...115.2 kbps for Modbus serial open style (DO, D1, PE, COM)
Data format8 bits, odd, even or no parity, 1 or 2 bits to stop for Modbus serial RJ45; 8 bits, configurable odd, even or no parity for Modbus serial open style (DO, D1, PE, COM)
Number of addresses0…247 for Modbus serial
Method of accessSlave Modbus serial
Type of polarizationNo impedance for Modbus serial
Display screen availableTrue
Operating positionVertical +/- 10 degree
Height455 mm
Width304 mm
Depth296.5 mm
Net weight24.50 kg
internal bypassTrue
Function availableSingle direction; Pre-heating; Power monitoring; Condition monitoring; User management; Ports and services hardening; Security event logging; Cybersecure firmware update; Small motor test
material declarationTrue
Contractual warranty
Warranty (in months)18
Environment
Electromagnetic compatibilityConducted and radiated emissions level A conforming to IEC 60947-4-2; Electrostatic discharge level 3 conforming to IEC 61000-4-2; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Voltage/current impulse level 3 conforming to IEC 61000-4-5; Damped oscillating waves level 3 conforming to IEC 61000-4-18; Immunity to conducted disturbances radio-frequency level 3 conforming to IEC 61000-4-6
Pollution degreeLevel 3
[Uimp] rated impulse withstand voltage6 kV
[Ui] rated insulation voltage600 V
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3; Class 3S3 according to IEC 60721-3-3
Ambient air temperature for operation-25…40 °C (without derating); 40…60 °C (with current derating of 1 % per °C above 40 °C)
Ambient air temperature for storage-40…70 °C
Ambient air transport temperature-40…70 °C
Operating altitude2000...4800 m with current derating 1 % per 100 m above 2000 m
Relative humidity5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Maximum deflection under vibratory load (during operation)1.5 mm at 2...13 Hz
Maximum deflection under vibratory load (during storage)1.75 mm at 2...9 Hz
Maximum deflection under vibratory load (during transport)1.75 mm at 2...9 Hz
Maximum acceleration under vibrational stress (during operation)1 gn at 13…200 Hz
Maximum acceleration under vibratory load (during storage)1 gn at 9…200 Hz; 1.5 gn at 200…500 Hz
Maximum acceleration under vibratory load (during transport)1 gn at 9…200 Hz; 1.5 gn at 200…500 Hz
Maximum acceleration under shock impact (during operation)15 gn at 11 ms
Maximum acceleration under shock load (during storage)10 gn at 11 ms
Maximum acceleration under shock load (during transport)10 gn at 11 ms
Main
Range of productAltivar Soft Starter ATS430
Product or component typeSoft starter
Product destinationAsynchronous motors
Product specific applicationStandard industrial machines
Device short nameATS430
Network number of phases3 phases
Utilisation categoryAC-3A; AC-53a
Ue power supply voltage208...600 V AC (- 15...10 %)
power supply frequency50...60 Hz - 20...20 %
[Ie] rated operational currentNormal duty: 480 A in line (at
Service factor at Ie100
Torque controlTrue
IP degree of protectionIP00
Motor power kW132 kW at 230 V in line normal duty; 250 kW at 400 V in line normal duty; 250 kW at 440 V in line normal duty; 315 kW at 500 V in line normal duty; 315 kW at 525 V in line normal duty
Motor power hp150 hp at 208 V normal duty; 350 hp at 460 V normal duty; 400 hp at 575 V normal duty
Communication port protocolModbus serial
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height53.000 cm
Package 1 Width40.000 cm
Package 1 Length60.100 cm
Package 1 Weight33.500 kg
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1956131
qrcode für Schneider Electric ATS430C48S6 soft starter 480A 208-600V