Schneider Electric ATS01N222RT, EAN: 3389110667325

Schneider Electric ATS01N222RT soft starter 22 A

Industrial Material > Automation > Frequency converter, soft starter

Schneider Electric ATS01N222RT soft starter 22 A

Lieske Part No. 969972
Mfg Part No ATS01N222RT
EAN-Code 3389110667325
Manufacturer Schneider Electric
Here only 385,70 EUR
458,98 EUR incl. VAT

Further information for Schneider Electric ATS01N222RT soft starter 22 A

Complementary
Assembly styleWith heat sink
Function availableIntegrated bypass
Supply voltage limits414…528 V
Supply frequency50...60 Hz - 5...5 %
Network frequency47.5...63 Hz
[Uc] Control circuit voltageBuilt into the starter
Starting time1 s / 100; 5 s / 20; 10 s / 10; Adjustable from 1 to 10 s
Deceleration time symbAdjustable from 1 to 10 s
Starting torque30...80 % of starting torque of motor connected directly on the line supply
Discrete input typeLogic (LI1, LI2, BOOST) stop, run and boost on start-up functions
Discrete input voltage24...40 V
Discrete input logicPositive LI1, LI2, BOOST at State 0: < 5 V and 13 V, >= 0.5 mA
Discrete output current2 A DC-13; 3 A AC-15
Discrete output typeOpen collector logic LO1 end of starting signal; Relay outputs R1A, R1C NO
Discrete output voltage24 V (voltage limits: 6...30 V) open collector logic
Minimum switching current10 mA at 6 V DC for relay outputs
Maximum switching currentRelay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load; Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
Display type1 LED (green) for starter powered up; 1 LED (yellow) for nominal voltage reached
Tightening torque0.5 N.m; 1.9…2.5 N.m
MarkingCE
Operating positionVertical +/- 10 degree
Height154 mm
Width45 mm
Depth131 mm
Net weight0.56 kg
Compatibility codeATS01N2
Contractual warranty
Warranty (in months)18
Environment
StandardsEN/IEC 60947-4-2
Product certificationsUL; CCC; C-Tick; GOST; CSA
IP degree of protectionIP20
Pollution degree2 conforming to EN/IEC 60947-4-2
Vibration resistance1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Ambient air temperature for operation-10…40 °C (without derating); 40…50 °C (with current derating of 2 % per °C)
Ambient air temperature for storage-25…70 °C conforming to EN/IEC 60947-4-2
Operating altitude1000 m with current derating of 2.2 % per additional 100 m
Logistical informations
Country of originDE
Main
Range of productAltistart 01
Product destinationAsynchronous motors
Product or component typeSoft starter
Product specific applicationSimple machine
Device short nameATS01
Network number of phases3 phases
[Us] rated supply voltage460...480 V - 10...10 %
Motor power hp10 hp, 3 phases at 460...480 V; 15 hp, 3 phases at 460...480 V
IcL starter rating22 A
Utilisation categoryAC-53B conforming to EN/IEC 60947-4-2
Current consumption110 A at nominal load
Type of startStart with voltage ramp
Power dissipation in W124.5 W in transient state; 4.5 W at full load and at end of starting
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.500 cm
Package 1 Width15.200 cm
Package 1 Length17.500 cm
Package 1 Weight661.000 g
Unit Type of Package 2S03
Number of Units in Package 214
Package 2 Height30 cm
Package 2 Width30 cm
Package 2 Length40 cm
Package 2 Weight9.812 kg
This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a power of up to 22A. This Altistart 01 can be used for a motor rated power up to 5.5 kW or 7.5 HP for 3 phases (200 V to 240 V AC). This DIN rail mounted soft starter allows the soft start of simple machines such as conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machines. It is 45 mm wide, which makes it one of the smallest soft starters on the market, it can be installed almost anywhere. It has an integrated bypass that reduces noise and heat dissipation. Easy setup with only 2 settings: can be configured even by non-professionals. It ensures a soft start of your machines, avoids mechanical stress and extends their lifespan.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/969972
qrcode für Schneider Electric ATS01N222RT soft starter 22 A